Lathe PM5000 Professional with 400 volt motor / 1.5 kW
€4,390.00*
% €4,999.00* (12.18% saved)Prices incl. 19% VAT. plus Shipping costs
Currently not available
Intended use
The PM5000 is a lathe for use in the high-end hobby sector and is used for turning rotationally symmetrical workpieces (e.g. cylindrical turned parts). The lathe is also used for cutting threads with metric or inch pitch.
Technical data
| Base unit dimensions (L x W x H) [mm]: | 1,820 x 440 x 710 |
|---|---|
| Bed width [mm]: | 187 |
| Centre distance [mm]: | 1.000, 1000 |
| Centre height [mm]: | 179 |
| Circulation Ø over cross slide [mm]: | 226 |
| Circulation Ø without bed bridge [mm]: | 502 |
| Clamping range inner jaws [mm]: | 4 - 200, 4 – 200 |
| Clamping range outer jaws [mm]: | 65 - 200, 65 – 200 |
| Concentricity of lathe chuck [mm]: | max. 0.060 |
| Face feed [mm]: | 0,014 - 0,380 |
| Frequency [Hz]: | 50 |
| Gross weight [kg]: | 660 (incl. base cabinet) |
| Lateral adjustability of the tailstock [mm]: | ± 10 |
| Lathe chuck diameter [mm]: | 200 |
| Lead of top slide spindle [mm]: | 2,5 |
| Lead screw pitch [mm]: | 3 |
| Length of bed bridge [mm]: | 225 |
| Longitudinal feed [mm]: | 0,052 - 1,392 |
| Machine dimensions (L x W x H) [mm]: | 1,770 x 750 x 660, 1.825 x 785 x 1.350 |
| Max. torsion bar height [mm]: | 22 |
| Motor power P1 [W]: | 1.820 |
| Motor power P2 [W]: | 1.500 |
| Net weight [kg]: | 510 (machine) / 70 (base cabinet), 580 |
| Number of longitudinal feeds: | 32, 32 / 0.052 to 1.392 mm |
| Number of planning feeds: | 32, 32 / 0.014 to 0.380 mm |
| Number of thread pitches (inch): | 34, 34 / 4 to 56 Gg/1" |
| Number of thread pitches (metric): | 26, 26 / 0.4 to 7.0 mm |
| Packaging dimensions (L x W x H) [mm]: | 1,930 x 760 x 1,600 (incl. base cabinet), 2.030 x 1.140 x 1.690 |
| Pitch face slide spindle [mm]: | 5 |
| Product line: | paulimot professional |
| Quadruple steel holder Mounting height [mm]: | 30 |
| Rotation Ø over machine bed [mm]: | 358 |
| Scale division on the bed slide handwheel [mm] / [in]: | 0,15 |
| Scale division on the cross slide handwheel [mm] / [in]: | 0,05 |
| Scale division on top slide handwheel [mm] / [in]: | 0,05 |
| Scale graduation on tailstock handwheel [mm] / [in]: | 0,05 |
| Spindle bore [mm]: | 51 |
| Spindle cone: | MK6 |
| Spindle holder: | Camlock - D1-5, Camlock - DIN 55029-5 |
| Spindle speed (high range) [rpm].: | 460 / 755 / 1.255 / 2.000 |
| Spindle speed (low range) [rpm].: | 70 / 115 / 190 / 300 |
| Spindle speed (rpm): | 70 - 2.000 |
| Spindle speed [rpm].: | 70 - 2.000 |
| Steps Spindle speed: | 8 |
| Tailstock cone: | MK3 |
| Tailstock quill stroke [mm]: | 100 |
| Thread pitch [Gg/"]: | 4 - 56/1 |
| Thread pitch [mm]: | 0,4 - 7,0 |
| Tool holder: | 4-fold |
| Top slide rotatable [°]: | 360 / Scale up to 60 |
| Travelling distance of the cross slide [mm]: | 170 |
| Travel of the bed slide [mm]: | 770 |
| Travel of the top slide [mm]: | 95 |
| Voltage [V]: | 400 |
| WEEE reg. no.: | EN 95902713 |
Lead and feed spindle lathe with oil bath gearbox and eight different spindle speeds
Automatic longitudinal and face feed
Slipping clutch on the pull spindle and professional control lever for ON/OFF or clockwise/anticlockwise rotation
Prismatic bed with additional ribs for greater stability
Powerful 400 volt motor, this heavy-duty device requires a higher mains voltage & is not equipped with a two-pin mains plug
Description of the
The PM5000 lathe is supplied mounted on its base frame. The metal lathe is driven by a powerful 400 volt three-phase motor with an output power of 1,500 watts. Power is reliably transmitted via a double belt pulley. The working spindle gear, which runs in an oil bath, has eight different spindle speeds from 70 to 2,000 rpm, which can be selected via two control levers. The automatic longitudinal and face feed is carried out via the feed spindle equipped with a slip clutch. During thread cutting, the feed is realised via the lead screw and the lock nut. Switching on the lead or pull spindle and setting the different feed speeds for turning or the desired pitch for thread cutting is done via four control levers on the separate feed gearbox. The PM5000 has 32 longitudinal and 32 face feeds, 26 metric and 34 imperial thread pitches. The direction of rotation of the lead or feed spindle can be changed independently of the direction of rotation of the lathe chuck by moving a shift lever. This means that this hobby lathe can also be used to produce left-hand threads. The lead screw is completely covered to prevent accidental intervention, and this protection also prevents falling metal chips from sticking. This prevents unnecessary wear and possible damage to the lock nut. The prism bed is induction hardened and ground. The machine bed also has a removable bed bridge. This enables the machining of turned parts with a diameter of up to approx. 500 mm. The PM5000 is also equipped with a foot brake. This allows the lathe to be stopped with pinpoint accuracy, for example when thread cutting. All guides can be adjusted backlash-free by means of wedge strips. The main spindle runs in precision tapered roller bearings, which can be readjusted if necessary. The top slide can be rotated and is therefore suitable for taper turning. The tailstock can also be moved transversely for taper turning. A professional control lever is used to switch the lathe on and off (clockwise or anti-clockwise rotation). The torque button, the switch for the coolant system, the operating light and the emergency stop button are located on the control panel on the headstock. Other special features include a centre distance of 1,000 mm and a spindle bore of 51 mm. A pre-installed coolant unit consisting of a collection container, coolant pump, delivery hose, stopcock and articulated hose with nozzle are included in the scope of delivery. An individually adjustable 4-jaw chuck with a diameter of 200 mm, a face plate as well as a travelling and a fixed steady rest complete the extensive range of special accessories for the PM5000.
Scope of delivery
- 1 x detailed operating instructions in German
- 1 x 3-jaw chuck 200 mm with inner and outer jaws
- 1 x 4-jaw chuck 200 mm individually adjustable jaws; with interchangeable jaws
- 1 x face plate / clamping disc
- 1 x fixed steady rest
- 1 x travelling steady rest
- 1 x oil can
- 1 x set of open-end spanners
- 1 x set of hexagon socket spanners
- 1 x spanner for 4-fold steel holder
- 1 x spanner for lathe chuck
- 1 x Reducing sleeve MK6 to MK4
- 1 x fixed centre punch tip MK3
- 1 x fixed centre punch tip MK4
- 1 x Phillips screwdriver
- 1 x slotted screwdriver
- 1 x Set of change gears
- 1 x Splash guard
- 1 x chip tray
- 1 x chip drawer
- 1 x halogen light
- 1 x threaded clock
- 1 x Base cabinet
- 1 x coolant unit
More about the brand and products fromÂ
Further information on our professional line
21 February 2025 11:10
Pm5000 mit Messsystem
Größer als ich erwartet hatte, sehr gute Qualität, ein bisschen Nacharbeit, läuft einwandfrei, für den Preis top Maschine.
27 January 2024 15:21
Danke,alles sehr gut!!!
Danke,alles sehr gut!!!
4 February 2023 15:15
Super Maschine für diesen Preis
Super Maschine für diesen Preis
21 November 2022 17:12
In România a venit in 6 zile
In România a venit in 6 zile preț imbatabil fata ce găsești la alti competitori In 6 Tagen in Rumänien vor der Tür angekommen, unschlagbarer Preis. ein gutes Produkt.
23 September 2022 15:50
Geiles Teil. Das ding hat mal richtig power
Geiles Teil. Das ding hat mal richtig power und macht einen sehr guten Eindruck. Zum Support kann man sich wirklich nicht beschweren. Antworten auf Emails sehr schnell und bei Unklarheiten rufen sie an.
7 June 2022 08:57
Sehr schnelle Lieferung und unkomplizierte Abwicklung!
Sehr schnelle Lieferung und unkomplizierte Abwicklung!
20 March 2022 19:16
5+
Für das kleinwekstatt passt genau. Brauche nur auch fräse.
7 February 2022 00:00
Drehmaschine PM5000
Service : Hallo zu aller erst möchte ich mich bei dem Team von Paulimot bedanken für den sehr guten Service die Freundliche Beratung der Fachkundigen Mitarbeiter die sehr höflich und zu allen Fragen bereit sind antwort zu geben. Zum Versand : Die Maschine ist mit Verspätung angekommen dies lag am Lieferanten seitens Paulimot wurde sie direkt am darauf folgenden Tag versandt. Generell ist Paulimot sehr schnell was den Versand angeht. Nun zur Maschine : Die Maschine ist fast genauso angekommen wie auf den Bildern zu sehen war ein Video gab es auch noch vom Funktionstest was ich sehr gut fand, leider sind ein paar Schrauben Lose gewesen. Die Verarbeitung der Maschine ist in Ordnung allerdings wäre meine Empfehlung die Maschine vor Ort zu besichtigen und dann zu kaufen wem es möglich ist. Ein kurzes Fazit : Sehr zu empfehlen im Sinne von Service, Beratung, Teile und Versand. Maschinen sind in jedem Fall sehr zu empfehlen denke ich kann man sagen. Vielen Dank :-)
4 November 2021 00:00
Produktbewertung
Eine Produktbewertung kann noch nicht erfolgen, da die Drehbank noch gar nicht in Betrieb genommen wurde. Für den Stromanschluß sind noch umfangreiche Erdarbeiten und weitere Installationen erforderlich.
28 May 2021 00:00
Paulimot PM5000
Habe mir eine PM5000 gegönnt. Vom Angebot bis zur Auftragsabwicklung alles perfekt und pünktlich wie vereinbart gelaufen. Großes Lob an die Mitarbeiter von Paulimot!!! Werde hier sicher Kunde bleiben.