Cutter head 80 mm with 6 inserts (TiAlN-coated)
Intended use
Cutterheads are mainly used for face milling surfaces, as fewer milling passes are required due to the larger milling diameter compared to end mills. It is also possible to mill offsets on surfaces. The main advantages of milling heads compared to HSS end mills, for example, are the standardised indexable inserts, with which very high cutting performance can be achieved. Depending on the material to be machined, inserts with different coatings can be used. Cutter heads are used together with a milling arbour.
Technical data
| Number of cutting edges: | 6 |
|---|---|
| Number of cutting edges: | 6 |
| Standard designation Cutting insert: | RPMT1204 |
| Surface coating of cutting insert: | TiAlN |
| Total height [mm]: | 50 |
| Ø cutter head [mm]: | 80 |
| Ø milling arbour holder [mm]: | 22 |
Cutter head surface-tempered through nickel plating
Six inserts for smooth running and higher cutting performance
TiAlN-coated inserts
For face and shoulder milling
Incl. screw for connection to a milling arbor
Description of the
The cutter head is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 80 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with six TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined. One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.
Scope of delivery
- 1 x cutter head 80 mm with 6 inserts
- 1 x M10 x 30 screw for connection to a milling arbor
More about the brand and products from
Produkt wie beschrieben, sehr schnelle Lieferung, alles i. O.
Top Qualität
Ausgepackt, auf Fräsdorn montiert und gefräst. Alles perfekt. Was will man mehr!
Gut qualität promte lieferung weiter so
Un ottimo prodotto a un ottimo prezzo...
Sehr gutes Preis-Leistungs-Verhältnis. Sehr robust und genau. Die Verarbeitung ist einwandfrei. Tadelloses Fräsergebnis im Bearbeiten von Edelstahl.
Gutes Teil ;-)
MUY SATISFACTORIA