Feed motor X-axis for SIEG SX2.3
Intended use
A feed motor is used to perform the feed movement of a tool or workpiece automatically and smoothly. In general, feed motors can be attached to all axes of machine tools.
Technical data
| Frequency [Hz]: | 50 |
|---|---|
| Housing dimensions (L x W x H) [mm]: | 215 x 165 x 117 |
| Motor power (P1) [Watt]: | 300 |
| Motor power (P2) [Watt]: | 35 |
| Transmission ratio: | 1:7,5 |
| Voltage [V]: | 230 |
| WEEE reg. no.: | EN 95902713 |
Suitable for X-axis of SIEG SX2.3 milling machines
Simple assembly
Can be decoupled and the feed speed can be infinitely adjusted
With limit switch for automatic switch-off
Including mounting material and adjustable stops for limit switches
Description of the
This feed motor is suitable for retrofitting to the X-axis of the SIEG SX2.3 drilling / milling machines. Installation is easy for anyone thanks to the enclosed, illustrated installation instructions. The feed speed is infinitely variable via a potentiometer. The transmission ratio from the motor shaft to the spindle of the X-axis is 1:7.5. The feed direction can be set via a toggle switch, which also has a zero position. This prevents the feed direction from being inadvertently reversed. To move the machine table manually, the feed motor can be disengaged via the clutch control knob. The feed movement can be switched off via limit switches, which are triggered by adjustable stops.
Scope of delivery
- 1 x X-axis feed motor for SIEG SX2.3
- 1 x coupling unit
- 2 x adjustable stop
- 1 x limit switch (2-sided)
- 1 x 230 volt power supply unit
- 1 x set of mounting material
- 1 x detailed, illustrated installation instructions
More about the brand and products from
This feed motor is suitable for retrofitting to the X-axis of the SIEG SX2.3 drilling / milling machines. Installation is easy for anyone thanks to the enclosed, illustrated installation instructions. The feed speed is infinitely variable via a potentiometer. The transmission ratio from the motor shaft to the spindle of the X-axis is 1:7.5. The feed direction can be set via a toggle switch, which also has a zero position. This prevents the feed direction from being inadvertently reversed. To move the machine table manually, the feed motor can be disengaged via the clutch control knob. The feed movement can be switched off via limit switches, which are triggered by adjustable stops.
This feed motor is suitable for retrofitting to the X-axis of the SIEG SX3.5Z and X3.5 drilling / milling machines. Installation is easy for anyone thanks to the enclosed illustrated installation instructions. The feed speed is infinitely variable via a potentiometer. The transmission ratio from the motor shaft to the spindle of the X-axis is 1:7.5. The feed direction can be set via a toggle switch, which also has a zero position. This prevents accidental reversal of the feed direction. To move the machine table manually, the feed motor can be disengaged via the clutch control knob. The feed movement can be switched off via limit switches, which are triggered by adjustable stops.
This feed motor is suitable for retrofitting to the X-axis of the SIEG X2.7L and SX2.7L drilling / milling machines. Installation is easy for anyone thanks to the illustrated installation instructions provided. The feed speed is infinitely variable via a potentiometer. The transmission ratio from the motor shaft to the spindle of the X-axis is 1:7.5. The feed direction can be set via a toggle switch, which also has a zero position. This prevents the feed direction from being inadvertently reversed. To move the machine table manually, the feed motor can be disengaged via the clutch control knob. The feed movement can be switched off via limit switches, which are triggered by adjustable stops.
Compatible with the F205-V/F207-V and F307-V models with ball screws.
This feed motor is suitable for retrofitting to the X-axis of the F205-V, F207-V and F307-V milling machines with ball screws. Installation is easy for anyone thanks to the illustrated installation instructions provided. The feed speed is infinitely variable via a potentiometer. The feed direction can be set via a toggle switch, which also has a zero position. This prevents accidental reversal of the feed direction. The cross table can be moved quickly in the X-axis using the rapid traverse. To move the machine table manually, the feed motor can be disengaged via the clutch control knob. The feed movement can be switched off via limit switches, which are triggered by adjustable stops.
This feed motor is suitable for retrofitting to the X-axis of SIEG SX4 drilling / milling machines. Installation is easy for anyone thanks to the enclosed illustrated installation instructions. The feed speed is infinitely variable via a potentiometer. The transmission ratio from the motor shaft to the spindle of the X-axis is 1:7.5. The feed direction can be set via a toggle switch, which also has a zero position. This prevents the feed direction from being inadvertently reversed. To move the machine table manually, the feed motor can be disengaged via the clutch control knob. The feed movement can be switched off via limit switches, which are triggered by adjustable stops.
This feed motor is suitable for retrofitting to the X-axis of the SIEG X2L, SX2L and SX2H drilling / milling machines. Installation is easy for anyone thanks to the enclosed, illustrated installation instructions. The feed speed is infinitely variable via a potentiometer. The transmission ratio from the motor shaft to the spindle of the X-axis is 1:7.5. The feed direction can be set via a toggle switch, which also has a zero position. This prevents the feed direction from being inadvertently reversed. To move the machine table manually, the feed motor can be disengaged via the clutch control knob. The feed movement can be switched off via limit switches, which are triggered by adjustable stops.
This feed motor is suitable for retrofitting to the X-axis of the SIEG X3, X3L, SX3 and SX3L drilling / milling machines. Installation is easy for anyone thanks to the illustrated installation instructions supplied. The feed speed is infinitely variable via a potentiometer. The transmission ratio from the motor shaft to the spindle of the X-axis is 1:7.5. The feed direction can be set via a toggle switch, which also has a zero position. This prevents the feed direction from being inadvertently reversed. To move the machine table manually, the feed motor can be disengaged via the clutch control knob. The feed movement can be switched off via limit switches, which are triggered by adjustable stops.
€333.00*
Content: 1 pcs
€332.00*
Content: 1 pcs
€332.00*
Content: 1 pcs
€338.00*
Content: 1 pcs
€383.00*
Content: 1 pcs
€333.00*
Content: 1 pcs
€363.00*
Content: 1 pcs