Hand tap set 3-piece M8 x 1.25
€6.90*
% €8.50* (18.82% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Taps are used to create an internal thread, i.e. a threaded bore, in metal, plastic or other solid materials. A general distinction is made between hand taps and machine taps, also known as single-cut taps. In a 3-piece hand tap set, the roughing, semi-finishing and finishing cutters each extend almost the entire length of the cutting edge. This type of tap is primarily used for cutting threads in blind holes. In single-flute taps, the roughing, intermediate and finishing cutters are arranged one after the other along the cutting edge. These taps are therefore particularly suitable for cutting through-holes.
Technical data
| Cutting edge length [mm]: | 20 |
|---|---|
| Drill Ø for core hole [mm]: | 6,8 |
| Execution: | right-hand cutting |
| Nominal dimension [mm]: | M8 |
| Pitch [mm]: | 1,25 |
| Shank Ø [mm]: | 6 |
| Square cross-section [mm]: | 5 |
| Surface coating: | Titanium nitride (TiN) |
| Thread type: | metric ISO standard thread |
| Tolerance class: | h6 |
| Tool material: | HSS |
| Total length [mm]: | 56 |
3-piece set comprising a pre-cutter, centre cutter and finish cutter
For producing a metric ISO standard thread
TiN-coated for a longer service life
Tolerance class h6, manufactured in accordance with DIN 352
Cylindrical shank with square section
Description of the
This hand tap set consists of a pre-cutter, a centre cutter and a finish cutter. The pre-cutter is marked with a ring on the shank, the centre cutter with two rings. The finish cutter has no ring. This set is used to produce metric ISO standard threads. The taps are made of HSS and coated with titanium nitride (TiN) to increase their service life. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The taps are manufactured in accordance with DIN 352 and are subject to tolerance class h6.
Scope of delivery
- 1 x pilot tap M8 x 1.25
- 1 x centre cutter M8 x 1.25
- 1 x finishing tap M8 x 1.25
- 1 x plastic storage case
More about the brand and products from
19 July 2026 09:36
Preis und Qualität sind top.
Die Gewindebohrer sind für den Heimanwender absolut in Ordnung und haben eine lange Standzeit. Die Beschichtung nützt sich zwar mit der Zeit ab, was aber keinen Einfluss auf den Gebrauch hat. Hier habe ich schon meherer Gewindebohrersätzte gekauft und bisher wurde ich nie enttäuscht, die Qualtiät ist einwandfrei und das bei einem akzeptablen Preis. Wer allerdings Hochleistungswerkzeuge für CNC-Arbeiten braucht, der liegt hier aber falsch, der sollte für entsprechende Stückzahlen und maschinelle Anwendungen weit mehr Geld ausgeben und dafür vorgesehene Werkzeuge kaufen. Für das Schneiden von Hand, wie z. B. in normalfesten Baustählen oder Buntmetallen, sind diese Gewindebohrer gedacht. Ich kaufe hier gerne wieder nach. Meine Empfehlung.
9 December 2022 10:21
Preis-Leistung sehr gut!
Preis-Leistung sehr gut!
3 April 2022 12:31
Zum Kauf empfohlen
Die Qualität der Verarbeitung ist sehr hoch. Zum Kauf empfohlen.
8 January 2022 00:00
supi
gut
6 April 2021 00:00
Einwandfrei
funktioniert tadellos
16 March 2021 00:00
Alles prima !
Preiswert, schnell geliefert und gute Qualität
6 March 2020 00:00
Gute Qualität
Die Hand-Gewindebohrer scheiden ein sehr gutes und akorates Gewinde. Die Lieferung erfolgte schnell und ohne Schwierigkeiten. Den Shop würde ich auf alle Fälle weiterempfehlen.