HSS replacement blade for mini parting-off tool holder 1.45 mm

HSS replacement blade for mini parting-off tool holder

You can also find the matching holder in our shop.

Please note that the blade is already pre-ground. However, the chip breaker must be reground.

The HSS blade has a parting width of 1.5 mm. The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.

The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.

The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.

Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.

The HSS blade has a grooving width of 1.6 mm. The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.

The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.

Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.

The HSS blade has a parting width of 2 mm. The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.

The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.

The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.

Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.

The HSS blade has a grooving width of 2 mm and is suitable for the parting-off tool holder from our "Knurling tool and parting-off tool set" with item number 23035. The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.

The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.

Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.

The HSS blade has a parting width of 2.5 mm. The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.

The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.

The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.

Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.

The HSS blade has a parting width of 3 mm. The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the measuring angle changed. This enables universal material processing.

The eight per cent cobalt alloy of the HSS blade also increases the heat and wear resistance and therefore the service life of the blade.

Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.

The HSS blade has a parting width of 3 mm. The blade can be sharpened or ground depending on the intended use. For example, the grooving width can be reduced or the blade angle changed. This enables universal material processing.

The narrower the cutting edge, the finer the work that can be carried out. Please note that reducing the blade width also increases the risk of vibrations at higher pressure.

You can also obtain the corresponding parting steel holder for this HSS knife from us.

Please note that the blade is already pre-ground, but the chip breaker still needs to be ground in.