Lathe PM4000 with 400 volt motor / 1.5 kW
€3,454.00*
% €3,795.00* (8.99% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
The PM4000 is a centre lathe and feed spindle lathe for use in the high-end hobby and semi-professional sector. Due to its versatile application possibilities, this lathe is used in model making, in individual and small series production, in prototype construction and in repair and training workshops. The lathe is designed for machining steel, cast iron, all non-ferrous metals, aluminium, brass, etc., but can also be used for machining plastics or similar materials that are not hazardous to health or generate dust.
Technical data
| Base unit dimensions (L x W x H) [mm]: | 1,560 x 490 x 700 |
|---|---|
| Bed width [mm]: | 180 |
| Centre distance [mm]: | 900 |
| Centre height [mm]: | 155 |
| Circulation Ø over cross slide [mm]: | 190 |
| Circulation Ø without bed bridge [mm]: | 460 |
| Clamping range inner jaws [mm]: | 4 - 200 |
| Clamping range outer jaws [mm]: | 65 - 200 |
| Concentricity of lathe chuck [mm]: | max. 0.060 |
| Face feed [mm]: | 0,011 - 0,276 |
| Frequency [Hz]: | 50 |
| Gross weight [kg]: | 542 (with base unit) / 481 (without base unit) |
| Lateral adjustability of the tailstock [mm]: | ± 10 |
| Lathe chuck diameter [mm]: | 200 |
| Lead of top slide spindle [mm]: | 2 |
| Lead screw pitch [mm]: | 3 |
| Length of bed bridge [mm]: | 225 |
| Longitudinal feed [mm]: | 0,053 - 1,291 |
| Machine dimensions (L x W x H) [mm]: | 1,560 x 700 x 600 |
| Max. torsion bar height [mm]: | 14 |
| Motor power P1 [W]: | 2.200 |
| Motor power P2 [W]: | 1.500 |
| Net weight [kg]: | 370 |
| Number of longitudinal feeds: | 40 |
| Number of planning feeds: | 40 |
| Number of thread pitches (inch): | 54 |
| Number of thread pitches (metric): | 32 |
| Packaging dimensions (L x W x H) [mm]: | 1,660 x 760 x 750 (without base cabinet) 1,660 x 760 x 1,150 (with base cabinet) |
| Pitch face slide spindle [mm]: | 5 |
| Quadruple steel holder Mounting height [mm]: | 25 |
| Rotation Ø over machine bed [mm]: | 310 |
| Scale division on the bed slide handwheel [mm] / [in]: | 0,5 / 0,02 |
| Scale division on the cross slide handwheel [mm] / [in]: | 0,05 / 0,0025 |
| Scale division on top slide handwheel [mm] / [in]: | 0,02 / 0,001 |
| Scale graduation on tailstock handwheel [mm] / [in]: | 0,04 / 0,002 |
| Spindle bore [mm]: | 38 |
| Spindle cone: | MK5 |
| Spindle holder: | Camlock - DIN 55029-4 (short taper 4) |
| Spindle speed (high range) [rpm].: | 100 / 280 / 300 / 360 / 500 / 840 / 1.095 / 1.400 / 1.810 |
| Spindle speed (low range) [rpm].: | 65 / 180 / 200 / 235 / 330 / 550 / 700 / 910 / 1.200 |
| Steps Spindle speed: | 18 |
| Tailstock cone: | MK3 |
| Tailstock quill stroke [mm]: | 110 / Scale up to 100 |
| Thread pitch [Gg/"]: | 4 - 60/1 |
| Thread pitch [mm]: | 0,4 - 7,0 |
| Tool holder: | 4-fold |
| Top slide rotatable [°]: | 360 / Scale up to 45 |
| Travelling distance of the cross slide [mm]: | 170 |
| Travel of the bed slide [mm]: | 600 |
| Travel of the top slide [mm]: | 85 |
| Voltage [V]: | 400 |
| WEEE reg. no.: | EN 95902713 |
Centre and feed spindle lathe with oil bath gearbox with nine gear steps
Automatic longitudinal and face feed as well as slip clutch on the feed spindle
Professional control lever for ON/OFF or clockwise/anticlockwise rotation
Features wedge bars (no pressure bars) on the cross and top slides and a prism bed with additional ribs for greater stability
Powerful 400 volt motor, this heavy-duty device requires a higher mains voltage & is not equipped with a two-pole mains plug
Description of the
The PM4000 lathe is supplied with a matching base frame. The metal lathe is driven by a powerful 400 volt three-phase motor with an output power of 1,500 watts. Power is reliably transmitted via a two-stage double pulley, which allows the user to switch between the high and low speed ranges (by changing the drive belts). The working spindle gearbox, which runs in an oil bath, has nine different spindle speeds, which can be selected via two control levers. This means that a total of 18 speeds from 65 to 1,810 rpm can be set. The automatic longitudinal and face feed is carried out via the feed spindle equipped with a slip clutch. During thread cutting, the feed is realised via the lead screw and the lock nut.
Switching on the lead or feed spindle and setting the different feed speeds for turning or the desired pitch for thread cutting is done via four control levers on the separate feed gearbox. The direction of rotation of the lead or pull spindle can be changed independently of the direction of rotation of the lathe chuck by moving a shift lever. This means that this hobby lathe can also be used to produce left-hand threads. The lead screw is completely covered to prevent accidental intervention, and this protection also prevents falling metal chips from sticking. This prevents unnecessary wear and possible damage to the lock nut. The prism bed is induction hardened and ground. The machine bed also has a removable bed bridge.
This enables the machining of turned parts with a diameter of up to approx. 450 mm. The PM4000 is also equipped with a foot brake. This allows the lathe to be stopped with pinpoint accuracy, for example when thread cutting. All guides can be adjusted backlash-free using wedge strips. The main spindle runs in precision tapered roller bearings, which can be readjusted if necessary. The top slide can be rotated and is therefore suitable for taper turning. The tailstock can also be moved transversely for taper turning. A professional control lever is used to switch the lathe on and off (clockwise or anti-clockwise rotation). The torque button, the operating light and the emergency stop button are located on the control panel on the headstock. Other special features include a centre distance of 900 mm and a spindle bore of 38 mm.
Scope of delivery
- 1 x detailed operating instructions in German
- 1 x 3-jaw chuck 200 mm with inner and outer jaws
- 1 x 4-jaw chuck 200 mm with individually adjustable jaws; with interchangeable jaws
- 1 x face plate / clamping disc 250 mm
- 1 x fixed steady rest
- 1 x travelling steady rest
- 2 x chuck spanner
- 1 x oil can
- 1 x set of change gears
- 1 x reducing sleeve
- 2 x fixed centre punches MK3
- 1 x splash guard
- 1 x chip tray
- 1 x halogen light
- 1 x thread dial indicator
- 1 x base cabinet
- 1 x various tools (square spanner, Allen key, open-end spanner, screwdriver, etc.)
More about the brand and products fromÂ
