Machine tap for stainless steel M2.5 x 0.45
Intended use
Taps are used to create an internal thread, i.e. a threaded hole, in metal, plastic or other solid materials. A general distinction is made between hand taps and machine taps, also known as single-cut taps. In a 3-part hand tap set, the pre-cutter, centre cutter and finish cutter each cover almost the entire length of the cutting edge. This type of tap is preferably used to produce threads in blind holes. In single-cut taps, the pre-cutter, centre cutter and finish cutter are arranged one behind the other on the cutting edge. This makes these taps particularly suitable for cutting through-hole threads.
Technical data
| Cobalt content in the material [%]: | 5 |
|---|---|
| Cutting edge length [mm]: | 9 |
| Drill Ø for core hole [mm]: | 2,05 |
| Execution: | right-hand cutting |
| Nominal dimension [mm]: | M2,5 |
| Pitch [mm]: | 0,45 |
| Shank Ø [mm]: | 2,8 |
| Square cross-section [mm]: | 2,8 |
| Surface coating: | AlTiN |
| Thread type: | metric ISO standard thread |
| Tolerance class: | h6 |
| Tool material: | HSS |
| Total length [mm]: | 52 |
Single-cut tap for the production of a metric ISO standard thread
Cobalt alloyed (5 %) for higher heat resistance
Suitable for hard materials due to AlTiN coating
Tolerance class h6, manufactured according to DIN ISO 529
Square on cylindrical shank
Description of the
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The tap is also AlTiN-coated. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN ISO 529 and is subject to tolerance class h6.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating):Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary, although the use of coolant generally increases the service life of the tap.
Scope of delivery
- 1 x machine tap for stainless steel M2.5 x 0.45
- 1 x plastic case for storage
More about the brand and products from
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The tap is also AlTiN-coated. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN ISO 529 and is subject to tolerance class h6.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating):Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary, although the use of coolant generally increases the service life of the tap.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The tap is also AlTiN-coated. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN ISO 529 and is subject to tolerance class h6.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating):Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary, although the use of coolant generally increases the service life of the tap.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The tap is also AlTiN-coated. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN ISO 529 and is subject to tolerance class h6.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating):Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary, although the use of coolant generally increases the service life of the tap.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The tap is also AlTiN-coated. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN ISO 529 and is subject to tolerance class h6.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating):Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary, although the use of coolant generally increases the service life of the tap.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The tap is also AlTiN-coated. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN ISO 529 and is subject to tolerance class h6.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating):Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary, although the use of coolant generally increases the service life of the tap.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The tap is also AlTiN-coated. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN ISO 529 and is subject to tolerance class h6.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating):Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary, although the use of coolant generally increases the service life of the tap.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The tap is also AlTiN-coated. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN ISO 529 and is subject to tolerance class h6.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating):Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary, although the use of coolant generally increases the service life of the tap.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The tap is also AlTiN-coated. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN ISO 529 and is subject to tolerance class h6.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating):Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary, although the use of coolant generally increases the service life of the tap.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The tap is also AlTiN-coated. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN ISO 529 and is subject to tolerance class h6.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating):Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary, although the use of coolant generally increases the service life of the tap.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The tap is also AlTiN-coated. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN ISO 529 and is subject to tolerance class h6.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating):Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary, although the use of coolant generally increases the service life of the tap.
€6.00*
Content: 1 pcs
€6.00*
Content: 1 pcs
€6.00*
Content: 1 pcs
€6.00*
Content: 1 pcs
€6.50*
Content: 1 pcs
€7.50*
Content: 1 pcs
€10.50*
Content: 1 pcs
€13.50*
Content: 1 pcs
€16.50*
Content: 1 pcs
€28.00*
Content: 1 pcs
1 February 2023 07:47
Gewinde-Bohrer
Absolut zufrieden