Machine tap M2 x 0.4
€4.50*
% €5.50* (18.18% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Taps are used to create an internal thread, i.e. a threaded bore, in metal, plastic or other solid materials. A general distinction is made between hand taps and machine taps, also known as single-cut taps. In a 3-piece hand tap set, the roughing, semi-finishing and finishing cutters each extend almost the entire length of the cutting edge. This type of tap is primarily used for cutting threads in blind holes. In single-flute taps, the roughing, intermediate and finishing cutters are arranged one after the other along the cutting edge. These taps are therefore particularly suitable for cutting through-holes.
Technical data
| Cobalt content in the material [%]: | 5 |
|---|---|
| Cutting edge length [mm]: | 9 |
| Drill Ø for core hole [mm]: | 1,6 |
| Execution: | right-hand cutting |
| Nominal dimension [mm]: | M2 |
| Pitch [mm]: | 0,4 |
| Shank Ø [mm]: | 2,8 |
| Square cross-section [mm]: | 2 |
| Thread type: | metric ISO standard thread |
| Tolerance class: | h6 |
| Tool material: | HSS |
| Total length [mm]: | 46,5 |
Single-flute tap
For producing a metric ISO standard thread
Cobalt-alloyed (5 %) for higher heat resistance
Tolerance class h6, manufactured in accordance with DIN 371
Cylindrical shank with square section
Description of the
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
Scope of delivery
- 1 x machine tap M2 x 0.4
- 1 x plastic storage case
More about the brand and products from
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
€4.50*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€3.90*
Contents: 1 pcs
€3.90*
Contents: 1 pcs
€3.90*
Contents: 1 pcs
€4.50*
Contents: 1 pcs
€4.50*
Contents: 1 pcs
€6.90*
Contents: 1 pcs
€8.50*
Contents: 1 pcs
€10.90*
Contents: 1 pcs
€19.50*
Contents: 1 pcs
4 April 2025 09:44
Preis, Leistung, alles Perfekt!
Preis, Leistung, alles Perfekt!
1 February 2023 09:35
Gutes Produkt. Einwandfreies Gewinde geschnitten.
Gutes Produkt. Einwandfreies Gewinde geschnitten.
1 February 2023 07:48
Gewinde-Bohrer
Wie immer gute Qualität
13 November 2022 12:24
Alles bestens, immer wieder
Alles bestens, immer wieder
30 August 2022 17:44
O.K
Dito M1,6
12 August 2022 07:06
Qualität ist wie erwartet, Lieferung schnell und
Qualität ist wie erwartet, Lieferung schnell und gut verpackt.
13 September 2021 00:00
Alles bestens
wie oben
22 August 2021 00:00
Gute Qualität
Bin sehr zufrieden
2 March 2021 00:00
Gewindebohrer
Bis jetzt habe ich nichts an der Qualität auszusetzen. Nicht schlechter, wie wesentlich teurere Fabrikate.
23 February 2021 00:00
ok
ok