Machine tap M4 x 0.7
€5.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Taps are used to create an internal thread, i.e. a threaded hole, in metal, plastic or other solid materials. A general distinction is made between hand taps and machine taps, also known as single-cut taps. In a 3-part hand tap set, the pre-cutter, centre cutter and finish cutter each cover almost the entire length of the cutting edge. This type of tap is preferably used to produce threads in blind holes. In single-cut taps, the pre-cutter, centre cutter and finish cutter are arranged one behind the other on the cutting edge. This makes these taps particularly suitable for cutting through-hole threads.
Technical data
| Cobalt content in the material [%]: | 5 |
|---|---|
| Cutting edge length [mm]: | 13 |
| Drill Ø for core hole [mm]: | 3,3 |
| Execution: | right-hand cutting |
| Nominal dimension [mm]: | M4 |
| Pitch [mm]: | 0,7 |
| Shank Ø [mm]: | 4,5 |
| Square cross-section [mm]: | 3,4 |
| Thread type: | metric ISO standard thread |
| Tolerance class: | h6 |
| Tool material: | HSS |
| Total length [mm]: | 66 |
Single-cut tap
For producing a metric ISO standard thread
Cobalt alloyed (5 %) for higher heat resistance
Tolerance class h6, manufactured according to DIN 371
Cylindrical shank on square
Description of the
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
Scope of delivery
- 1 x machine tap M4 x 0.7
- 1 x plastic case for storage
More about the brand and products from
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
€5.00*
Content: 1 pcs
€6.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€5.00*
Content: 1 pcs
€5.00*
Content: 1 pcs
€5.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€8.00*
Content: 1 pcs
€10.00*
Content: 1 pcs
€13.00*
Content: 1 pcs
€23.50*
Content: 1 pcs
21 February 2025 05:41
Brauchbar
Gute Qualität für kleines Geld.
28 April 2022 08:50
gut
Verarbeitung: sehr gut Preis/Leistung: gut Standfestigkeit: ?
20 December 2021 00:00
Alles bestens
In der Artikelansicht ist der Gewindeboher titanisiert. In der Beschreibung nicht. Alles in Ordnung
14 March 2021 00:00
Sehr gute Verarbeitung
Preis-Leistung einfach super, bisher sehr saubere Gewinde geschnitten.
1 January 2021 00:00
Gute Qualität zum guten Preis schnell geliefert
Einwandfrei, sauberes Gewinde in einem Satz
18 May 2020 00:00
Masch.-Gew-Bo.M4
Sehr gut
4 December 2019 00:00
Qualitätsprodukt
Alles i.O.
28 June 2019 00:00
Bohrer
Einwandfreies Werkzeug zum fairen Preis
8 April 2019 00:00
M4×0,7 Gewindebohrer
Habe mich entschieden hier bei Paulimot 2 Gewindebohrer M4&M8 zu kaufen. Super Qualität für diesen Preis unschlagbar. Absolut zu empfehlen. Versand ebenfalls Top.
22 December 2017 00:00
Sehr gut
Super Preis Leistung