Machine tap M5 x 0.8
€5.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Taps are used to create an internal thread, i.e. a threaded hole, in metal, plastic or other solid materials. A general distinction is made between hand taps and machine taps, also known as single-cut taps. In a 3-part hand tap set, the pre-cutter, centre cutter and finish cutter each cover almost the entire length of the cutting edge. This type of tap is preferably used to produce threads in blind holes. In single-cut taps, the pre-cutter, centre cutter and finish cutter are arranged one behind the other on the cutting edge. This makes these taps particularly suitable for cutting through-hole threads.
Technical data
| Cobalt content in the material [%]: | 5 |
|---|---|
| Cutting edge length [mm]: | 15 |
| Drill Ø for core hole [mm]: | 4,2 |
| Execution: | right-hand cutting |
| Nominal dimension [mm]: | M5 |
| Pitch [mm]: | 0,8 |
| Shank Ø [mm]: | 6 |
| Square cross-section [mm]: | 5 |
| Thread type: | metric ISO standard thread |
| Tolerance class: | h6 |
| Tool material: | HSS |
| Total length [mm]: | 74 |
Single-cut tap
For producing a metric ISO standard thread
Cobalt alloyed (5 %) for higher heat resistance
Tolerance class h6, manufactured according to DIN 371
Cylindrical shank on square
Description of the
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
Scope of delivery
- 1 x machine tap M5 x 0.8
- 1 x plastic case for storage
More about the brand and products from
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
€5.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€5.00*
Content: 1 pcs
€5.00*
Content: 1 pcs
€5.00*
Content: 1 pcs
€5.50*
Content: 1 pcs
€8.00*
Content: 1 pcs
€10.00*
Content: 1 pcs
€13.00*
Content: 1 pcs
€23.50*
Content: 1 pcs
24 April 2025 06:53
Guter und brauchbarer Gewindebohrer
Sehr gut, nur die Gewindetiefe wird durch den Ø6mm Schaft begrenzt. An einem Gewindebohrer wurde dieser etwas abgeschliffen, damit das Gewinde von Klemmschellen entsprechend tief geschnitten werden konnte. Das Produktbild entspricht dem Produkt und ich bin mit dem Kauf sehr zufrieden.
21 February 2025 05:40
Brauchbar
Gute Qualität für kleines Geld.
28 November 2024 12:12
Empfehlenswert
Gute Qualität
28 April 2022 08:50
gut
Verarbeitung: sehr gut Preis/Leistung: gut Standfestigkeit: ?
11 January 2022 00:00
Machine thread cutter
Not yet used
4 December 2019 00:00
Qualitätsprodukt
Alles i.O.
5 February 2015 00:00
Gut und preiswert
9 August 2013 00:00
gutes Preis- Leistungsverhältnis