Nylon impact head for soft-face mallet, Ø 38 mm
€2.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Screw-in hammer striking heads are used when the original striking head is worn or damaged. The worn hammer head is replaced by the new hammer head.
Technical data
| Thread: | M18 x 2.5 |
|---|---|
| Total length [mm]: | 36 |
| Ø insert [mm]: | 38 |
| Material: | Nylon |
Very wear-resistant
Resistant to oil and grease
No chipping
Screw-in
Changed in just a few seconds
Description of the
Made from nylon, this cylindrical impact head replacement for soft-face mallets has a diameter of 38 mm and a thickness of 21 mm. The impact head can be screwed into the hammer head via its M18 x 2.5 thread. Nylon is characterised by its high wear resistance and resistance to oils and greases.
Scope of delivery
- 1 x nylon impact head for soft-face mallet, Ø 38 mm
More about the brand and products from
Made from nylon, this cylindrical impact head replacement for soft-face mallets has a diameter of 38 mm and a thickness of 21 mm. The impact head can be screwed into the hammer head via its M18 x 2.5 thread. Nylon is characterised by its high wear resistance and resistance to oils and greases.
Made from nylon, this cylindrical impact head replacement for soft-face mallets has a diameter of 25 mm and a thickness of 21 mm. The impact head can be screwed into the hammer head via its M16 x 2 thread. Nylon is characterised by its high wear resistance and resistance to oils and greases.
€2.00*
Content: 1 pcs
€1.50*
Content: 1 pcs