Quick-action drill chuck for clockwise and anti-clockwise rotation 1 - 16 mm SK30 / M12
€55.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Drill chucks are used to clamp tools with a cylindrical shank, such as drills, countersinks, reamers, etc. Drill chucks are used in machine tools such as lathes, milling machines or drilling machines. Depending on the type of machine, a drill chuck with a suitable holder is required. A general distinction is made between drill chucks in which the tools are clamped with a spanner and drill chucks in which the tools can be clamped without a spanner, so-called quick-action drill chucks.
Technical data
| Clamping range [mm]: | 1 - 16 |
|---|---|
| Concentricity deviation max. [mm]: | 0,1 |
| Cone mandrel: | SK30 (DIN 2080) / M12 / B18 |
| Inner cone: | B18 |
| Ø drill max. [mm]: | 16 |
Suitable for clockwise and anti-clockwise rotation thanks to locking mechanism
Fast, secure clamping and unclamping
No clamping spanner required
With tightening thread, suitable for use on milling machines
Taper arbor and drill chuck connected via cone
Description of the
This quick-action drill chuck has a locking mechanism that prevents the drill chuck from loosening in anti-clockwise rotation. As a result, unlike conventional quick-action drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
Scope of delivery
- 1 x quick-action drill chuck for clockwise and anti-clockwise rotation 1 - 16 mm SK30 / M12
More about the brand and products from
This quick-action drill chuck has a locking mechanism that prevents the drill chuck from loosening in anti-clockwise rotation. As a result, unlike conventional quick-action drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
With this precision quick-action drill chuck, the taper arbor and the drill bit holder consist of one part, i.e. the taper arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a tightening thread in the steep taper and is therefore suitable for use on milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
With this precision quick-action drill chuck, the tapered arbor and the drill bit holder consist of one part, i.e. the tapered arbor cannot be separated from the drill chuck. In contrast to drill chucks with an inserted taper arbor, this design enables a higher concentricity to be achieved. The taper arbor has a tightening thread in the steep taper and is therefore suitable for use on milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Notes: Drill chucks are not suitable for milling work. Due to the DIN standard, this drill chuck is particularly suitable for milling machines with a lockable spindle.
This quick-action drill chuck is supplied including taper arbour. The taper arbor and drill chuck are connected to each other via a positive-locking B18 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the steep taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 16 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
This quick-release drill chuck has a locking mechanism that prevents the drill chuck from loosening during anti-clockwise rotation. As a result, unlike conventional quick-action drill chucks, this drill chuck is suitable for clockwise and anti-clockwise rotation. The chuck is locked and unlocked by turning the red ring to "LOCK" or "UNLOCK". The drill chuck is supplied with a tapered arbour. The taper arbor and drill chuck are connected to each other via a form-fit B16 cone, i.e. the taper arbor can be separated from the drill chuck. The taper arbor has a tightening thread in the Morse taper and is therefore suitable for use in milling machines. The clamping range of this chuck is 1 to 13 mm. As the three clamping jaws close completely, it is also possible to clamp tools with a shank diameter of less than 1 mm.
Note: Drill chucks are not suitable for milling work.
€55.50*
Content: 1 pcs
€75.50*
Content: 1 Piece
€75.50*
Content: 1 Piece
€50.50*
Content: 1 pcs
€51.50*
Content: 1 pcs
25 March 2025 00:34
Einfach zu bedienen gute Qualität
Einfach zu bedienen gute Qualität
20 August 2024 04:39
Schnellspannbohrfutter
Qualität und Verarbeitung top. Spannt so gut das man sogar Gewinde damit bohren kann.
12 March 2024 17:16
Sk30 Bohrfutter
Super Produkt sehr genauer Rundlauf und perfekte Spannkraft
7 November 2023 09:27
Alles ok :-)
Sehr gutes Futter, guter Rundlauf.
2 August 2022 20:28
Sieht toll aus aber fuer meine Fraesmaschine
Sieht toll aus aber fuer meine Fraesmaschine SX2.7L etwas zu lang. Man kann kaum einen Grosseren (langeren) Bohrer einstecken. Leider gibt es keine Abmessungen and der Webseite.
19 March 2022 08:47
Excellent quality and presentation. I would buy
Excellent quality and presentation. I would buy it again.
29 October 2021 00:00
Bin zufrieden
Ein Produkt von guter Qualität.