Turning tool with insert 12 x 12 mm SCLCR1212F09
€16.50*
% €18.00* (8.33% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Turning tools with replaceable inserts are characterised by the fact that worn cutting edges can be replaced quickly and easily. The tedious and time-consuming regrinding of the cutting edge is no longer necessary. Another advantage of turning tools with reversible or replaceable inserts is that the most suitable insert can be mounted on the holder depending on the material to be machined. For example, there are special inserts for machining aluminium or non-ferrous metals. Both the holders and the inserts are standardised and can be identified by the respective standard designation.
Technical data
| Area of application: | Longitudinal turning |
|---|---|
| Cross-section of clamping shank [mm]: | 12 x 12 |
| Cutting plate: | CCMT09T304 |
| Execution: | right |
| Standard designation: | SCLCR1212F09 |
| Surface: | burnished |
| Total length [mm]: | 80 |
Right-hand turning tool
Cutting inserts available for special applications
Replacement inserts available individually or in a set of 10
Incl. Torx spanner for quickly changing the insert
Description of the
This turning tool with the standard designation SCLCR1212F09 has a shank measuring 12 x 12 mm and an overall length of 80 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Scope of delivery
- 1 x SCLCR1212F09 turning tool
- 1 x Torx spanner T15
More about the brand and products from
This turning tool with the standard designation SCLCR1212F09 has a shank measuring 12 x 12 mm and an overall length of 80 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SCLCR0606D06 has a 6 x 6 mm shank and an overall length of 61 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SCLCR0808D06 has an 8 x 8 mm shank and an overall length of 60 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SCLCR1010E06 has a 10 x 10 mm shank and an overall length of 71 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SCLCR1414H09 has a 14 x 14 mm shank and an overall length of 101 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SCLCR1616H09 has a 16 x 16 mm shank and an overall length of 100 mm. The cutting insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This turning tool with the standard designation SCLCR2020K09 has a shank measuring 20 x 20 mm and an overall length of 125 mm. The insert is made of sintered carbide. In contrast to HSS chisels, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
€16.50*
Content: 1 pcs
€16.00*
Content: 1 Piece
€16.50*
Content: 1 pcs
€16.50*
Content: 1 pcs
€18.00*
Content: 1 pcs
€18.50*
Content: 1 pcs
€19.00*
Content: 1 Piece
22 February 2025 15:43
Schnelle Lieferung, top Produkt!
Schnelle Lieferung, top Produkt!
31 March 2022 12:37
Sehr präzise gefertigt, Unterkanten der Schneidplatten fluchten
Sehr präzise gefertigt, Unterkanten der Schneidplatten fluchten exakt mit dem Stahlhalter und stehen nicht über. Tolle Qualität, sehr preisgünstig!
1 December 2021 00:00
Drehmeißel mit Schneidplatte
Konnte die Drehmeißel nur kurz testen, ich denke gute Qualität, bin voll zufrieden. Werde mir noch weitere Schneidplatten bestellen. Die Lieferung erfolgte sehr schnell, voll zufrieden.
10 May 2021 00:00
Sehr gut
Preis - Leistung stimmt.
11 April 2021 00:00
Guter Artikel
Sehr guter Meissel, sauber verarbeitet, tut was er soll.
6 February 2021 00:00
perfektes Ersatzteil
Nach erhalt umgehend in die Drehbank eingebaut und hat perfekt funktioniert. Schnelle Lieferung vielen Dank.
7 July 2020 00:00
Drehmeißel mit Schneidplatte
Super Verarbeitung top Qualität
13 April 2020 00:00
super Teil
habe den Halter schon mehrfach gekaft und bin sehr zufrieden
24 July 2019 00:00
Alles bestens!
Gut Beratung, schnelle Lieferung.
5 June 2019 00:00
Sehr gut
Ich habe den Drehmeißel mit meiner Fräse "misbraucht", indem ich ihn im Schraubstock eingespannt habe, und das Werkstück statt dem Fräser. Die Bearbeitung hat wunderbar funktioniert und schöne Oberflächen erzeugt. Praktisch wäre ein ähnlicher Drehstahl der den "stumpfen Winkel" der HM-Wendeplatte als Schneidspitze bietet (recycling, 45° Fase).