Vice for dividing heads Ø 100 mm, jaw width 80 mm
Intended use
A vice is used to clamp workpieces properly so that drilling and milling work can be carried out safely on machine tools (e.g. drilling machines or drilling/milling machines).
Technical data
| Base area [mm]: | Ø 116 |
|---|---|
| Jaw height [mm]: | 20 |
| Jaw width [mm]: | 80 |
| Span (max.) [mm]: | 42 |
| Surface: | ground |
| Total height [mm]: | 33 |
| Material: | Steel |
80 mm jaw width, 42 mm maximum clamping width
Suitable for fine drilling and milling work
Movable jaw with vertical and horizontal prism for clamping cylindrical workpieces
For mounting on dividing heads
Includes four M5 sliding blocks and four M5 fastening screws
Description of the
This small vice, ground on all sides, is suitable for fine drilling and milling work. The arrangement of the four holes for the fixing screws included in the scope of delivery allows it to be mounted on dividing heads with three or four T-slots. The movable jaw, which is equipped with one horizontal and one vertical prism, can be moved and clamped via the spindle. The handle is knurled for a good grip. There is a cross hole at the end of the handle. A shaft with a corresponding diameter is installed in this cross hole, which is used as a lever to increase the clamping force.
Scope of delivery
- 1 x vice for dividing heads Ø 100 mm, jaw width 80 mm
- 4 x T-slot nut M5
- 4 x hexagon socket screw M5 x 16
More about the brand and products from
