Cross table 225 x 175 mm 360° rotatable
€190.00*
% €237.00* (19.83% saved)Prices incl. 19% VAT. plus Shipping costs
Currently not available
Intended use
A cross table is used on both milling and drilling machines. As a cross table can be moved in both the X and Y axes, the workpiece can be positioned exactly under the tool. This allows precise drilling and milling work to be carried out.
Technical data
| Material cross table: | Cast steel |
|---|---|
| Max. table load [kg]: | 30 |
| Number of T-slots: | 2 |
| Scale division handwheels [mm]: | 0,01 |
| Size of the T-slots [mm]: | 10 (M8) |
| T-slot spacing [mm]: | 72 |
| Table size [mm]: | 225 x 175 |
| Total height [mm]: | 138 |
| X-axis travel [mm]: | 120, 135 |
| Y-axis travel [mm]: | 105 |
Sturdy and solidly manufactured, work table ground on all sides
Can be rotated 360° on the base plate
Dovetail guides can be adjusted backlash-free using pressure bars
Nonius on both handwheels
Two continuous T-slots 12 mm for M10 sliding blocks
Description of the
This swivelling cross table is sturdy and solidly made of cast steel. The work table is ground on all sides. As the table can be rotated through 360°, it can also be milled at any angle diagonal to the axes. The worktable has two continuous T-slots with a width of 10 mm for T-nuts with an M8 thread. The workpiece is fixed in the desired position on the worktable using clamping claws, hold-down clamps or similar. The cross table can be moved in the X and Y directions using the large handwheels fitted with a vernier. A measuring scale on the Y-axis makes it quick and easy to read off the travel distance. The dovetail guides can be adjusted backlash-free using pressure bars. The spindle of the Y-axis is protected from falling chips by a drag plate.
Scope of delivery
- 1 x cross table 225 x 175 mm 360° rotatable
- 2 x long hand crank
- 2 x hand crank short
More about the brand and products from
