Skip to main content

Drilling/milling machine SIEG SX2L with brushless motor and tiltable Z-column

Bargain: Minor surface damage on the milling table - technically flawless! Year of construction 2021! (See pictures 2 and 3)

Intended use

The SIEG SX2L is a drilling/milling machine for beginners and hobbyists. It is designed for the production of smaller milled parts. It is suitable for processing softer materials such as unalloyed steel, plastic, aluminium, copper or similar non-hazardous or dust-generating materials.

Technical data

Drilling capacity max. [mm]: 16
Frequency [Hz]: 50
Gross weight [kg]: 72
Hole spacing for fastening the machine base [mm]: 180 / 300, 180 and 300
Inclination range Z-pillar [°]: +/- 45
Machine base dimensions [mm]: 155 x 380
Machine dimensions (LxWxH) [mm]: 520 x 580 x 725, 520 x 600 x 725
Max. distance between spindle and worktable [mm]: 275
Milling capacity cutter head (max.) [mm]: 35
Milling capacity finger cutter (max.) [mm]: 20
Motor power (P1) [W]: 650
Motor power (P2) [W]: 500
Net weight [kg]: 56
Number of T-slots: 3
Packaging dimensions (LxWxH) [mm]: 640 x 600 x 730
Projection [mm]: 170
Quill stroke [mm]: 170, Milling head: 170
Size of the T-slots [mm]: 12 (M10)
Spindle holder: MK3 / M12
Spindle speed (infinitely variable) [rpm].: 100 - 2.500
Spindle speed [rpm].: 100 - 2.500
Steps Spindle speed: variable
T-slot spacing [mm]: 34
Table rotatable [°]: no
Table size [mm]: 485 x 120
Tapping capacity max. [mm]: 12
Voltage [V]: 230
WEEE reg. no.: EN 95902713
X-axis travel [mm]: 300
Y-axis travel [mm]: 130
Z-axis travel [mm]: 180

Very solidly built drilling/milling machine with 500 watt brushless motor

MK3 holder and 485 x 120 mm cross table

The machine is operated via a conveniently located control unit, with infinitely variable spindle speeds from 0 to 2,500 rpm available

The router runs very quietly and smoothly

All guides can be adjusted and readjusted backlash-free using pressure bars

Description of the

The SIEG SX2L is a compact, robust 230-volt drilling/milling machine with variable speed control. It is driven by a powerful, brushless DC motor with an output power of 500 watts. Power is transmitted quietly via a toothed belt, even at high speeds. The dynamic control ensures high torque even at low speeds. The entire speed range from 100 to 2,500 rpm is covered by one belt position; it is not necessary to change the drive belt. During drilling operations, the quill stroke is controlled via the feed lever, while the machine has an activatable fine feed for precise infeed in the Z-axis during milling. Thanks to the ± 45° tiltable Z-column, both milling and drilling can be carried out at the machining angle set via an angle scale. The adjustable depth stop on the Z-column allows milling and drilling work to be carried out with repeat accuracy. All guides can be adjusted backlash-free using pressure bars. The emergency stop button, the operating and fault light and the speed controller are located on the front of the control unit. The on/off switch is located on the side. The SX2L can be retrofitted with a feed motor and / or a digital speed display as optional accessories.

Scope of delivery

  • 1 x SIEG SX2L drilling/milling machine
  • 1 x Detailed operating instructions in German
  • 1 x MK3/B16 taper arbour
  • 4 x Allen key
  • 3 x open-end spanner
  • 2 x T-slot stone M10
  • 1 x oil tube
  • 2 x spanner for tool change
  • 1 x M12 tightening screw

More about the brand and products from 

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.

Excellent

Very good

Good

Acceptable

Unsatisfactory

This site is protected by reCAPTCHA and the Privacy Policy and Terms of Use apply.

Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
Paulitschek Maschinen- und Warenvertriebsgesellschaft mbH
ZeppelinstraĂŸe 3
89231 Neu-Ulm, Deutschland
+49 731 23232
support@paulimot.de