Skip to main content

Lathe PM190-V with 400 mm centre distance, frequency-controlled

Intended use

The PM190-V is a lathe for beginners in machining and is suitable for the hobby sector. The bench lathe is designed for the production of smaller turned parts. Thanks to the high-torque drive, even in the low speed range, it is not only suitable for machining softer materials such as plastic, aluminium, copper or zinc, but also for machining steel.

Technical data

Bed width [mm]: 100
Centre distance [mm]: 400
Centre height [mm]: 90
Circulation Ø over cross slide [mm]: 120
Clamping range inner jaws [mm]: 2 - 90
Clamping range outer jaws [mm]: 30 - 80
Concentricity of lathe chuck [mm]: max. 0.040
Frequency [Hz]: 50
Gross weight [kg]: 82
Lateral adjustability of the tailstock [mm]: ± 6
Lathe chuck diameter [mm]: 100
Lead of top slide spindle [mm]: 1
Lead screw pitch [mm]: 2
Longitudinal feed [mm]: 0,083 - 0,159
Machine dimensions (L x W x H) [mm]: 820 x 490 x 490
Max. torsion bar height [mm]: 10
Motor power P1 [W]: 750
Motor power P2 [W]: 550
Net weight [kg]: 65
Number of longitudinal feeds: 3
Number of thread pitches (inch): 10
Number of thread pitches (metric): 14
Packaging dimensions (L x W x H) [mm]: 900 x 480 x 480
Pitch face slide spindle [mm]: 2
Quadruple steel holder Mounting height [mm]: 15
Rotation Ø over machine bed [mm]: 180
Scale division on the bed slide handwheel [mm] / [in]: 0,25
Scale division on the cross slide handwheel [mm] / [in]: 0,05
Scale division on top slide handwheel [mm] / [in]: 0,025
Scale graduation on tailstock handwheel [mm] / [in]: 0,025
Spindle bore [mm]: 21
Spindle cone: MK3
Spindle holder: cylindrical DIN 6350
Spindle speed [rpm].: 50 - 200 / 200 - 600 / 400 - 800 / 600 - 2.500
Steps Spindle speed: 4 - variable
Tailstock cone: MK2
Tailstock quill stroke [mm]: 55 / Scale up to 50
Thread pitch [Gg/"]: 10 - 44/1
Thread pitch [mm]: 0,3 - 3,0
Tool holder: 4-fold
Top slide rotatable [°]: 360 / Scale up to 40
Travelling distance of the cross slide [mm]: 75
Travel of the bed slide [mm]: 320
Travel of the top slide [mm]: 85
Voltage [V]: 230
WEEE reg. no.: EN 95902713

Powerful, frequency-controlled 3-phase asynchronous motor

400 mm centre distance

Speed range 50 to 2,500 rpm.

Automatic longitudinal feed

Metal change gears

Description of the

The PM190-V is a 230 volt bench lathe with variable speed control. It is driven by a powerful 3-phase asynchronous motor, manufactured in Germany, with an output power of 550 watts. Thanks to the Austrian-made frequency converter, which is specially matched to the motor, and the four-stage reduction gear, the hobby lathe has sufficient torque even in the low speed ranges. The four speed ranges, which can be adjusted by changing the drive belts, cover speeds from 50 to 2,500 rpm. The lathe is equipped with an automatic longitudinal feed. To select the different feed speeds for turning and the different pitches for thread cutting, the required change gear combinations are used according to a table. The PM190-V has three longitudinal feeds, 14 metric and ten imperial thread pitches. All required metal change gears are included in the scope of delivery. The PM190-V is a lead screw lathe. The lead screw is completely covered to prevent accidental intervention, and this protection also prevents falling metal chips from sticking. This prevents unnecessary wear and possible damage to the lock nut. The guides on the cross and top slides can be adjusted backlash-free using wedge and pressure bars. The main spindle runs in precision tapered roller bearings, which can be readjusted if necessary. The top slide of the bench lathe can be rotated through 360°. The tailstock can also be moved for taper turning. The ON/OFF switch, the switch for clockwise/anticlockwise rotation, the speed display, the speed controller and the emergency stop button are located on the control box above the headstock.

Scope of delivery

  • 1 x lathe PM190-V
  • 1 x operating instructions
  • 1 x change gears
  • 1 x lathe chuck (3-jaw chuck, 100 mm)
  • 1 x set of external jaws
  • 1 x chuck spanner
  • 1 x fixed centre point MK2
  • 1 x fixed centre point MK3
  • 1 x oil can
  • 2 x screwdriver
  • 2 x open-end spanner
  • 1 x hook spanner
  • 1 x set of Allen keys
  • 1 x Splash guard
  • 1 x chip tray
Downloads (click here)

Videos

More about the brand and products from 

Product comparison
Article image
Lathe PM190-V: Grey metal construction with red accents. Control panel on the left, headstock on the right. Speed controller and emergency stop at the top.
Red SIEG C2 lathe with silver bed and controls. Details include an emergency stop button, safety guards and lathe chuck.
Red lathe SC2 from SIEG on grey work surface, detailed view. Operating elements, spindle and slide are recognisable. Warning notices are attached.
A SIEG SC2H Black Edition lathe in black and red with controls, digital speed display and red anodised handwheels.
Product title
Lathe PM190-V with 400 mm centre distance, frequency-controlled
Lathe SIEG SC4 with 125 mm chuck, 510 mm centre distance
Lathe SIEG C2, 250 watts, 400 mm centre distance
Lathe SIEG SC2, 500 Watt, 400 mm centre distance
Lathe SIEG SC2H Black Edition
Valuation

Average rating of 4.7 out of 5 stars

Average rating of 4.8 out of 5 stars

Average rating of 4.7 out of 5 stars

Average rating of 4.7 out of 5 stars

Average rating of 5 out of 5 stars

Description of the

The PM190-V is a 230 volt bench lathe with variable speed control. It is driven by a powerful 3-phase asynchronous motor, manufactured in Germany, with an output power of 550 watts. Thanks to the Austrian-made frequency converter, which is specially matched to the motor, and the four-stage reduction gear, the hobby lathe has sufficient torque even in the low speed ranges. The four speed ranges, which can be adjusted by changing the drive belts, cover speeds from 50 to 2,500 rpm. The lathe is equipped with an automatic longitudinal feed. To select the different feed speeds for turning and the different pitches for thread cutting, the required change gear combinations are used according to a table. The PM190-V has three longitudinal feeds, 14 metric and ten imperial thread pitches. All required metal change gears are included in the scope of delivery. The PM190-V is a lead screw lathe. The lead screw is completely covered to prevent accidental intervention, and this protection also prevents falling metal chips from sticking. This prevents unnecessary wear and possible damage to the lock nut. The guides on the cross and top slides can be adjusted backlash-free using wedge and pressure bars. The main spindle runs in precision tapered roller bearings, which can be readjusted if necessary. The top slide of the bench lathe can be rotated through 360°. The tailstock can also be moved for taper turning. The ON/OFF switch, the switch for clockwise/anticlockwise rotation, the speed display, the speed controller and the emergency stop button are located on the control box above the headstock.

The SIEG SC4 is a 230 volt lathe with variable speed control. It has a combined lead and feed spindle and is driven by a powerful, brushless DC motor with an output power of 1,000 watts. The dynamic control ensures a high torque in all speed ranges. It adjusts automatically to maintain the specified speed. The speed range of the hobby lathe extends from 100 to 2,000 rpm. It has a centre distance of 510 mm. The combined lead/traction spindle enables both longitudinal and face feed. An additional lock nut is integrated for thread cutting. To select the different feed speeds for turning and the different pitches for thread cutting, the required change gear combinations are used according to the change gear table. The lead/traction spindle is covered to prevent accidental intervention; this protection also prevents metal chips from sticking. This prevents unnecessary wear and possible damage to the lock nut. The SIEG SC4 lathe has two longitudinal and two face feeds, 17 metric and ten imperial thread pitches. The top slide, which can be rotated by ± 45°, can be adjusted in the direction of the X-axis via T-slots on the bed slide. The tailstock can also be moved for taper turning. The direction of rotation and speed can be set at the touch of a button on the control panel. The speed display, the START and STOP buttons and the emergency stop button are also located on the control panel.

The SIEG C2 is a 230 volt bench lathe with variable speed control. It is driven by a 250 watt brush motor. In order to achieve sufficient torque even at low speeds, the small lathe has a reduction gear. A lever on the back of the mini lathe can be used to select between the "fast" and "slow" speed ranges. The SIEG C2 is a lead screw lathe. It has a longitudinal feed for thread cutting. A reversible centre allows the direction of rotation of the lead screw to be changed independently of the direction of rotation of the lathe chuck. This means that left-hand threads can be produced with this lathe. The speed controller, the toggle switch for the direction of rotation of the main spindle and the emergency stop button are located on the control panel. Ten metric thread pitches from 0.4 to 2.0 millimetres can be achieved using the interchangeable plastic gears included in the scope of delivery.

The SIEG SC2 is a 230-volt bench lathe with variable speed control. It is driven by a powerful, brushless DC motor with an output power of 500 watts. The dynamic control ensures a high torque at all speeds. It adjusts automatically to maintain the specified speed. The speed range of the metal lathe extends from 100 to 2,500 rpm. The entire speed range is covered by one belt adjustment. The small lathe has a longitudinal feed for thread cutting. The SIEG SC2 is a lead screw turning machine. A reversible centre allows the direction of rotation of the lead screw to be changed independently of the direction of rotation of the lathe chuck. This means that left-hand threads can be produced with this bench lathe. The control panel contains the speed controller, the toggle switch for the direction of rotation of the main spindle, the START and STOP switch and the emergency stop button. The SC2 is equipped with a digital vernier (switchable between mm and inches) on the cross slide and top slide as standard. Ten metric thread pitches from 0.4 to 2.0 millimetres can be achieved using the interchangeable steel gears included in the scope of delivery. The lathe can be optionally equipped with a digital speed display, the connection for which is already available.

The SIEG SC2H Black Edition is a special edition of the SIEG SC2. Compared to the SC2 standard version, the Black Edition machine has a large LED control panel and a speed display. Both the on/off and the direction of rotation functions are operated via LED-illuminated push buttons. The selected direction of rotation of the work spindle is displayed via LED-illuminated symbols on the control panel. The spindle speed can be finely adjusted using the potentiometer with illuminated graduations. The set speed can be read off the large LED speed display. Another feature of the Black Edition is the special black and red paint finish. The handwheels are made of red anodised aluminium with chrome-plated handles to match the look of the machine. The emergency stop button is located on the front of the control panel. The machine has two USB ports on the left-hand side, which can be used to connect a work light, smartphone or tablet, for example.
As with the SIEG SC2, the SIEG SC2H Black Edition is also a compact, robust 230-volt bench lathe with variable speed control. It is driven by a powerful, brushless DC motor with an output power of 500 watts. The dynamic control ensures high torque at all speeds. It adjusts automatically to maintain the specified speed. The speed range of the metal lathe extends from 100 to 2,500 rpm. The entire speed range is covered by one belt adjustment. The small lathe has a longitudinal feed for thread cutting. The SIEG SC2H is a lead screw turning machine. A reversible centre allows the direction of rotation of the lead screw to be changed independently of the direction of rotation of the lathe chuck. This means that left-hand threads can be produced with this bench lathe. Ten metric thread pitches from 0.4 to 2.0 millimetres can be achieved using the interchangeable steel gears included in the scope of delivery.

Price

€1,210.00*

Content: 1 pcs

€1,899.00*

Content: 1 pcs

€539.00*

Content: 1 Piece

€945.00*

Content: 1 pcs

€1,229.00*

Content: 1 pcs

Bed width [mm]
100
115
83
83
83
Centre distance [mm]
400
510
400
400
400
Centre height [mm]
90
110
90
90
90
Circulation Ø over cross slide [mm]
120
120
110
110
110
Clamping range inner jaws [mm]
2 - 90
2,5 - 125
2 - 90
2 - 90
2 - 90
Clamping range outer jaws [mm]
30 - 80
38 - 110
30 - 80
30 - 80
30 - 80
Concentricity of lathe chuck [mm]
max. 0.040
max. 0.040
max. 0.040
max. 0.040
max. 0.040
Frequency [Hz]
50
50
50
50
50
Gross weight [kg]
82
137
51
51
56
Lateral adjustability of the tailstock [mm]
± 6
± 4
-
-
-
Lathe chuck diameter [mm]
100
125
100
100
100
Lead of top slide spindle [mm]
1
1
1
1
1
Lead screw pitch [mm]
2
2
1,5
1,5
1,5
Longitudinal feed [mm]
0,083 - 0,159
0,045 - 0,126
0,1 - 0,2
0,1 - 0,2
0,1 - 0,2
Machine dimensions (L x W x H) [mm]
820 x 490 x 490
1,050 x 650 x 420
800 x 300 x 360
800 x 320 x 350
800 x 340 x 360
Max. torsion bar height [mm]
10
10
8
8
8
Motor power P1 [W]
750
1.250
370
650
650
Motor power P2 [W]
550
1.000
250
500
500
Net weight [kg]
65
110
38
40
45
Number of longitudinal feeds
3
2
10
10
10
Number of thread pitches (inch)
10
10
-
-
-
Number of thread pitches (metric)
14
17
10
10
10
Packaging dimensions (L x W x H) [mm]
900 x 480 x 480
1,110 x 700 x 500
900 x 380 x 380
900 x 380 x 390
920 x 440 x 470
Pitch face slide spindle [mm]
2
1
1
1
1
Quadruple steel holder Mounting height [mm]
15
13
15
15
15
Rotation Ø over machine bed [mm]
180
210
180
180
180
Scale division on the bed slide handwheel [mm] / [in]
0,25
0,5
-
-
-
Scale division on the cross slide handwheel [mm] / [in]
0,05
0,02
0,025 / 0,001
-
-
Scale division on top slide handwheel [mm] / [in]
0,025
0,02
0,025 / 0,001
-
-
Scale graduation on tailstock handwheel [mm] / [in]
0,025
0,02
-
-
-
Spindle bore [mm]
21
20
20
20
20
Spindle cone
MK3
MK3
MK3
MK3
MK3
Spindle holder
cylindrical DIN 6350
cylindrical DIN6350
cylindrical DIN 6350
cylindrical DIN 6350
cylindrical DIN 6350
Spindle speed [rpm].
50 - 200 / 200 - 600 / 400 - 800 / 600 - 2.500
100 - 2.000
100 - 2.500
100 - 2.500
100 - 2.500
Steps Spindle speed
4 - variable
variable
variable
variable
variable
Tailstock cone
MK2
MK2
MK2
MK2
MK2
Tailstock quill stroke [mm]
55 / Scale up to 50
40
55
55
55
Thread pitch [Gg/"]
10 - 44/1
8 - 24/1
-
-
-
Thread pitch [mm]
0,3 - 3,0
0,25 - 3,0
0,4 - 2,0
0,4 - 2,0
0,4 - 2,0
Tool holder
4-fold
4-fold
4-fold
4-fold
4-fold
Top slide rotatable [°]
360 / Scale up to 40
± 45
360 / Scale up to 45
360 / Scale up to 45
360 / Scale up to 45
Travelling distance of the cross slide [mm]
75
100
70
70
70
Travel of the bed slide [mm]
320
420
375
315
315
Travel of the top slide [mm]
85
70
70
75
75
Voltage [V]
230
230
230
230
230
WEEE reg. no.
EN 95902713
EN 95902713
EN 95902713
EN 95902713
EN 95902713
Face feed [mm]
-
0,0225 - 0,063
-
-
-
Number of planning feeds
-
2
-
-
-

10 of 138 reviews

Average rating of 4.8 out of 5 stars


82%

16%

2%

0%

0%


Leave a review!

Share your experiences with other customers.

Excellent

Very good

Good

Acceptable

Unsatisfactory

This site is protected by reCAPTCHA and the Privacy Policy and Terms of Use apply.

23 May 2025 14:06

Review with rating of 5 out of 5 stars

im großen ganzen bin ich zufrieden.

im großen ganzen sehr zufrieden. Es gibt zwei Punkte,die Ölwanne+der 4 Kantschlüssel, der nicht passte.

6 May 2025 15:33

Review with rating of 5 out of 5 stars

Top maschine ich würde noch mal

Top maschine ich würde noch mal kaufen nur kann ich weiter empfehlen

5 May 2025 17:18

Review with rating of 4 out of 5 stars

Sorgfältig verpackt und schnell geliefert

Sorgfältig verpackt und schnell geliefert. Wie in den meisten Bewertungen beschrieben,gibt es leichte Mängel bezüglich der Lackierung.Aber alles im akzeptabelen Bereich. Das Dreibackenfutter klemmt an einigen Stellen beim Öffnen und Schließen. Die Maschine läuft ruhig und lässt sich gut regeln. Das Umlegen der Riemen ist gut für machbar. Die Wechselräder zum Gewindeschneiden waren nur schwer an der Maschine zu wechseln, da die Gewinde der beiden Bolzen nicht in Ordnung sind. Da im Satz der Zahnräder eine Distanzhülse fehlt, muß man sich mit einem Zahnrad mit wenig Zähnen behelfen um die gewünschte Kombi zu erreichen. Leider gibt es im Shop weder Hülse noch die Bolzen als Ersatz. Das Probegewinde, welches ich gesdreht habe war einwandfrei. Die Drehmaschine ist, so wie geliefert, empfehlenswert. Ein gutes Preis-Leistungsverhältnis.

26 March 2025 09:53

Review with rating of 5 out of 5 stars

Alles in Ordnung!

Ich habe vom Drehen eigentlich keine Ahnung, und habe trotzdem mit dieser Maschine schon meine ersten kleinen Erfolge gehabt. Ich habe einige Youtube-Videos geschaut, und der Rest ist "Learning by doing". Die Handhabung ist einfach. Für kleine Projekte in der Hobbywerkstatt halte ich die Maschine für völlig ausreichend. Ich habe eine Kurbel für den Arbeitstisch und Scharniere für ein Gartentor gebaut. Einfach cool. Der Wechsel der Geschwindigkeiten mit dem Umlegen der Riemen geht einfach. Aber man braucht es wohl kaum? Ich habe wieder die schnellste Stufe eingestellt. Den Rest macht das Poti. Der Wechsel der Zahnräder ist da etwas fummeliger. Ich habe mal versucht, Gewinde zu schneiden. Aber das ist nichts für Anfänger. Ich habe den Kauf nicht bereut, auch wenn die Maschine nicht sehr oft gebraucht wird. Haben ist besser als Brauchen! Der Versand und die Lieferung waren problemlos. Die Holzkiste war stabil genug. Achim von der Ostseeküste

8 March 2025 10:57

Review with rating of 4 out of 5 stars

Motor ist ein wenig schwach, ansonsten war

Motor ist ein wenig schwach, ansonsten war alles in Ordnung.

18 June 2024 17:07

Review with rating of 4 out of 5 stars

Die Verarbeitung könnte besser sein. Schlitten

Die Verarbeitung könnte besser sein. Schlitten streift an der Rückwand. Alles, was ich bis jetzt getestet habe, funktioniert.

13 June 2024 19:15

Review with rating of 5 out of 5 stars

Die Drehmaschine funktioniert sehr gut Danke

Die Drehmaschine funktioniert sehr gut Danke

23 May 2024 19:28

Review with rating of 5 out of 5 stars

Erste kleine arbeiten wurden gut gelöst. Selbst

Erste kleine arbeiten wurden gut gelöst. Selbst bei Edelstahl Durchmesser 20mm mit kleinen Spanquerschnitten hat die kleine Maschine funktioniert.

15 April 2024 18:45

Review with rating of 5 out of 5 stars

Molto soddisfatto 😉😘

Fantastico piccolo tornio .era proprio quello che volevo . molto silenzioso e potente.quello che mi serviva anche per non disturbare nessuno😉monto preciso . arrivato prima del previsto bene imballato.ma aveva una piccola ammaccatura sul paratrucioli ed era graffiato un po' il plexiglass...colpa del corriere...ma nulla di importante. Sono molto contento dell'acquisto . prenderò anche la torretta a cambio rapido ed il mandrino a quattro griff.. complimenti paoulimot 👍

1 April 2024 09:50

Review with rating of 5 out of 5 stars

Tipp Topp wie jedesmal

Tipp Topp wie jedesmal

Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
Paulitschek Maschinen- und Warenvertriebsgesellschaft mbH
Zeppelinstraße 3
89231 Neu-Ulm, Deutschland
+49 731 23232
support@paulimot.de