Parallel underlay set 18-piece length 150 mm, width 8.5 mm
Intended use
Parallel supports are used as workpiece clamping aids for parallel-axis clamping during milling. They can be used in conjunction with a machine vice to adjust the height of the workpiece in the vice, or as a base for direct clamping on the worktable. This prevents damage to the machine table when drilling through the workpiece.
Technical data
| Accuracy [mm]: | +/- 0,01 |
|---|---|
| Hardness [HRC]: | 55 to 62 |
| Height [mm]: | 14, 16, 20, 24, 30, 32, 36, 40, 44 |
| Parallelism [mm]: | 0,005 |
| Total length [mm]: | 150 |
| Width [mm]: | 8,5 |
| Material: | Steel 40Cr |
Ground in pairs
Hardened (55 to 62 HRC)
Accuracy: +/- 0.01 mm
Parallelism: 0.005 mm
Aluminium box for practical storage
Description of the
This set consists of nine pairs of parallel supports with different widths and heights. In order to achieve certain support heights, the parallel supports can also be used on top of each other (upright). The tolerance specifications refer exclusively to the height of the individual parallel supports. The set is supplied in an aluminium box with a foam insert for practical and proper storage.
Scope of delivery
- 1 x pair of parallel underlays 8.5 x 14 x 150 mm
- 1 x pair of parallel underlays 8.5 x 16 x 150 mm
- 1 x pair of parallel underlays 8.5 x 20 x 150 mm
- 1 x pair of parallel underlays 8.5 x 24 x 150 mm
- 1 x pair of parallel underlays 8.5 x 30 x 150 mm
- 1 x pair of parallel underlays 8.5 x 32 x 150 mm
- 1 x pair of parallel underlays 8.5 x 36 x 150 mm
- 1 x pair of parallel underlays 8.5 x 40 x 150 mm
- 1 x pair of parallel underlays 8.5 x 44 x 150 mm
- 1 x aluminium box for storage
More about the brand and products from
