10 x carbide indexable insert TCMT090204
€40.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Indexable inserts are used in machining and are mounted on the turning tools or milling cutters intended for this purpose. Depending on the intended use or the material to be machined, inserts are available in various shapes and with special coatings. For example, there are special inserts for machining aluminium or non-ferrous metals. The inserts are standardised and can be identified by the respective standard designation. If a cutting insert is worn, it is simply replaced with a new insert.
Technical data
| Areas of application: | Chamfering, Facing, Internal boring, Longitudinal turning |
|---|---|
| Clearance angle [°]: | 7 |
| Cutting edge radius [mm]: | 0,4 |
| Point angle [°]: | 60 |
| Standard designation: | TCMT090204 |
| Surface: | TiN |
Carbide insert TiN-coated for longer tool life
Universal application range
For machining soft materials such as aluminium
Also suitable for cutting harder materials such as steel
Description of the
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
Scope of delivery
- 10 x carbide indexable insert TCMT090204
More about the brand and products from
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
€40.50*
Content: 1 pcs
€45.00*
Content: 1 pcs
€45.00*
Content: 1 pcs
€5.00*
Content: 1 pcs
€4.50*
Content: 1 pcs
€5.00*
Content: 1 pcs
11 May 2024 07:11
Wendeschneidplatte TCMT090204
Einwandfreie Funktion!
5 March 2024 18:11
schnelle Lieferung und alles Top
schnelle Lieferung und alles Top
11 March 2023 11:39
Schnelle Lieferung
Schnelle Lieferung
25 February 2023 10:17
Super wendeschneidplatten
Super wendeschneidplatten
21 February 2023 09:18
Sehr rasche Lieferung, Qualität und Preis/Leistung sind
Sehr rasche Lieferung, Qualität und Preis/Leistung sind gut.
6 February 2023 07:48
Alles in Ordnung. Qualität wie erwartet!
Alles in Ordnung. Qualität wie erwartet!
7 December 2022 09:07
Qualität, Verpackung u. Versand alles OK
Qualität, Verpackung u. Versand alles OK
17 November 2022 18:49
Wendeschneidplatte
Preis/Leistung super
20 October 2022 04:51
Preis/Leistungsverhältnis gut. Artikel entsprechen der Beschreibung. Versand
Preis/Leistungsverhältnis gut. Artikel entsprechen der Beschreibung. Versand war schnell und sicher. Paulimot ist für mich die erste Adresse, ich bin zufrieden mit den Artikeln und dem Service!
16 October 2022 08:53
Schnelle Lieferung ! Artikel kommt in die
Schnelle Lieferung ! Artikel kommt in die Reserve und wird später eingesetzt !