Clamping claw set 58-piece M6 / 8 mm in case
€29.00*
% €35.50* (18.31% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Clamping claws are used for quick and secure clamping of workpieces, tools and fixtures on machine tables with T-slots.
Technical data
| Clamping height (max.) [mm]: | 64 |
|---|---|
| For groove width [mm]: | 8 |
| Hardness [HRC]: | 18 - 20 |
| Thread size stud bolts: | M6 |
| Tool material: | C45E steel |
58-piece set
For 8 mm T-slot width and M6 thread
Fast and secure clamping of workpieces, tools or fixtures
Supplied in a practical, sturdy plastic case
Made from high-quality tempered steel
Description of the
The individual components in this set are made from C45 heat-treated steel (material number 1.0503) and have undergone heat treatment. Among other things, this leads to an increase in tensile strength.
Assembly (see picture "Assembly example")
The clamping arm (also known as a clamping claw) with a slotted hole is fastened so that one end rests on the body to be clamped. The other end rests on a support, the step block. The threaded rod is attached as close as possible to the workpiece and fixed at the lower end to a plate or the machine table using a T-slot nut. A collar nut is fitted to the upper end of the stud bolt. This applies the clamping force by tightening it firmly. This prevents the workpiece from slipping. This allows you to work on the workpiece safely and quickly.
The clamping claw set has a maximum clamping height of 64 mm.
The individual clamping elements are neatly stored in the practical plastic case.
Scope of delivery
- 1 x plastic case
- 6 x T-slot nut
- 6 x collar nut
- 4 x extension nut
- 6 x step clamps
- 12 x step block
- 24 x stud bolt
More about the brand and products from
