Cutter head 50 mm + 20 x replacement cutting insert
€146.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
Cutterheads are mainly used for face milling surfaces, as fewer milling passes are required due to the larger milling diameter compared to end mills. It is also possible to mill offsets on surfaces. The main advantages of milling heads compared to HSS end mills, for example, are the standardised indexable inserts, with which very high cutting performance can be achieved. Depending on the material to be machined, inserts with different coatings can be used. Cutter heads are used together with a milling arbour.
Technical data
| Number of cutting edges: | 4 |
|---|---|
| Number of cutting edges: | 4 |
| Standard designation Cutting insert: | TPGW160308 |
| Surface coating of cutting insert: | TiAlN |
| Total height [mm]: | 40 |
| Ø cutter head [mm]: | 50 |
| Ø milling arbour holder [mm]: | 22 |
Cutter head surface-tempered by nickel plating
Incl. 20 replacement cutting inserts
Four cutting inserts
TiAlN-coated inserts
For practical and proper storage in a high-quality aluminium box
Description of the
The cutter head from this set is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 50 mm.
The set consists of a cutter head and 20 matching indexable inserts. The cutter head itself is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutter head.
The cutterhead is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating): Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
Scope of delivery
- 1 x cutter head 50 mm
- 20 x cutting plate TPGW160308
- 2 x storage box for 10 cutting inserts each
- 1 x Torx spanner
- 1 x M10 x 30 screw for connection to a milling arbor
- 1 x aluminium box for storage
More about the brand and products from
The cutter head from this set is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 50 mm.
The set consists of a cutter head and 20 matching indexable inserts. The cutter head itself is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutter head.
The cutterhead is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating): Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
The cutter head from this set is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 50 mm.
The set consists of a cutter head and 20 matching indexable inserts. The cutter head itself is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutter head.
The cutterhead is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating): Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined.
One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.
The cutter head from this set is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 40 mm.
The set consists of a cutter head and 20 matching indexable inserts. The cutter head itself is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutter head.
The cutterhead is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating): Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
The cutter head is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 50 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined. One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.
The cutter head is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 63 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined. One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.
The cutter head is suitable for face or shoulder milling (radius 6 mm) of surfaces. The diameter of the cutter is 80 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with six TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating allows hardened, alloyed steels and cast iron to be machined. One advantage of cutterheads with round inserts (if they are only used for face milling) is that the inserts can be used around the entire circumference. This means that if the round cutting insert is worn at one point, it is only turned a little further. In contrast, a square insert can only be turned once or twice.
The cutter head is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 40 mm. The cutter head is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with three TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
The cutter head is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 50 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with four TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
The cutter head is suitable for face or shoulder milling of surfaces. The diameter of the cutter is 63 mm. The cutter head is nickel-coated. This nickel coating provides excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
The cutter head is suitable for face and shoulder milling of surfaces. The diameter of the cutter is 80 mm. The cutter head is nickel-coated. This nickel coating offers excellent corrosion protection. Nickel is resistant to air, water, diluted acids, lubricants and most alkalis. Another feature of the nickel surfaces is the visual enhancement of the cutterhead, which is fitted with five TiAlN-coated indexable inserts. The advantages and properties of the titanium-aluminium-nitride coating (TiAlN coating):Titanium-aluminium-nitride (TiAlN) is a compound of the elements titanium, aluminium and nitrogen. A key feature of this coating is its high resistance to heat hardening and oxidation. This coating is intended for use in the machining of hard and tough materials and therefore for high machining temperatures. The TiAlN coating can be used to machine hardened, alloyed steels and cast iron.
€146.00*
Content: 1 pcs
€161.00*
Content: 1 pcs
€137.00*
Content: 1 pcs
€78.00*
Content: 1 pcs
€85.00*
Content: 1 pcs
€95.00*
Content: 1 pcs
€59.00*
Content: 1 pcs
€67.00*
Content: 1 pcs
€78.00*
Content: 1 pcs
€88.00*
Content: 1 pcs
2 April 2020 00:00
Schnelle Lieferung, guter Preis!
präzise Ausführung, funktioniert gut!