Drilling/milling machine SIEG X2P with 230 volt motor
Intended use
The SIEG X2P is a drilling/milling machine for beginners and hobbyists. It is designed for the production of smaller milled parts. It is suitable for processing softer materials such as plastic, aluminium, copper or similar materials that do not pose a health hazard or generate dust.
Technical data
| Drilling capacity max. [mm]: | 13 |
|---|---|
| Frequency [Hz]: | 50 |
| Gross weight [kg]: | 68 |
| Hole spacing for fastening the machine base [mm]: | 185 / 297, 185 and 297 |
| Machine base dimensions [mm]: | 355 x 215 |
| Machine dimensions (LxWxH) [mm]: | 550 x 480 x 770 |
| Max. distance between spindle and worktable [mm]: | 300 |
| Milling capacity cutter head (max.) [mm]: | 30 |
| Milling capacity finger cutter (max.) [mm]: | 16 |
| Motor power (P1) [W]: | 500 |
| Motor power (P2) [W]: | 350 |
| Net weight [kg]: | 58 |
| Number of T-slots: | 3 |
| Packaging dimensions (LxWxH) [mm]: | 550 x 550 x 700 |
| Projection [mm]: | 170 |
| Quill stroke [mm]: | 170, Milling head: 170 |
| Size of the T-slots [mm]: | 8 (M6) |
| Spindle holder: | MK3 / M12 |
| Spindle speed (infinitely variable) [rpm].: | 100 - 2.500 |
| Spindle speed [rpm].: | 100 - 2.500 |
| Steps Spindle speed: | variable |
| T-slot spacing [mm]: | 45 |
| Table rotatable [°]: | no |
| Table size [mm]: | 400 x 145 |
| Voltage [V]: | 230 |
| WEEE reg. no.: | EN 95902713 |
| X-axis travel [mm]: | 300 |
| Y-axis travel [mm]: | 150 |
| Z-axis travel [mm]: | 210 |
Speed range 100 to 2,500 rpm. (infinitely variable)
Cross table 400 x 145 mm / tool holder MK3
Milling capacity finger cutter 16 mm / milling capacity cutter head 30 mm
Fast and precise movement of the milling head via rack and pinion and fine feed
Two speed ranges (slow / fast) for higher torque in the low speed range
Description of the
The SIEG X2P is a 230-volt drilling/milling machine with a speed range of 100 to 2,500 rpm. It is driven by a 350 watt brush motor. Power is transmitted via a 2-stage gearbox. A gear lever is used to select between the high and low speed ranges. The speed can be continuously adjusted within both speed ranges. Thanks to the reduction ratio in the gearbox, the X2P also has sufficient torque in the low speed range. No quill is installed in the X2P. The feed in the Z direction is achieved by moving the milling head via quick adjustment with star knob or via the activatable fine feed. The adjustable depth stop on the Z-column allows milling and drilling work to be carried out with repeat accuracy. In relation to its size, the X2P has large travel ranges in the X and Y axes. All guides can be adjusted backlash-free using pressure bars. The speed controller, the operating light and the micro-fuse holder are located on the front of the operating unit. The emergency stop button and the fault light are located on the left-hand side of the control unit.
Scope of delivery
- 1 x SIEG X2P drilling/milling machine
- 1 x Detailed operating instructions
- 4 x Allen keys
- 3 x open-end spanner
- 4 x T-slot stone M6
- 1 x Oil tube
- 1 x spanner set for tool change
- 1 x M12 tightening screw
More about the brand and products from
