Machine tap M6 x 1
€5.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Taps are used to create an internal thread, i.e. a threaded hole, in metal, plastic or other solid materials. A general distinction is made between hand taps and machine taps, also known as single-cut taps. In a 3-part hand tap set, the pre-cutter, centre cutter and finish cutter each cover almost the entire length of the cutting edge. This type of tap is preferably used to produce threads in blind holes. In single-cut taps, the pre-cutter, centre cutter and finish cutter are arranged one behind the other on the cutting edge. This makes these taps particularly suitable for cutting through-hole threads.
Technical data
| Cobalt content in the material [%]: | 5 |
|---|---|
| Cutting edge length [mm]: | 18 |
| Drill Ø for core hole [mm]: | 5 |
| Execution: | right-hand cutting |
| Nominal dimension [mm]: | M6 |
| Pitch [mm]: | 1 |
| Shank Ø [mm]: | 6 |
| Square cross-section [mm]: | 5 |
| Thread type: | metric ISO standard thread |
| Tolerance class: | h6 |
| Tool material: | HSS |
| Total length [mm]: | 83 |
Single-cut tap
For producing a metric ISO standard thread
Cobalt alloyed (5 %) for higher heat resistance
Tolerance class h6, manufactured according to DIN 371
Cylindrical shank on square
Description of the
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
Scope of delivery
- 1 x machine tap M6 x 1
- 1 x plastic case for storage
More about the brand and products from
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
This machine tap / single-cut tap is made from an alloy of HSS steel with a cobalt content of 5 %. The cobalt content increases the heat resistance of the tap. The advantage of a machine tap over a hand tap set is that only one pass is required to produce the thread. This tap is used to produce metric ISO standard threads. At the end of the cylindrical shank there is a square for mounting in a tap wrench. The tap is manufactured in accordance with DIN 371 and is subject to tolerance class h6.
€5.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
€5.00*
Content: 1 pcs
€5.00*
Content: 1 pcs
€5.00*
Content: 1 pcs
€5.50*
Content: 1 pcs
€8.00*
Content: 1 pcs
€10.00*
Content: 1 pcs
€13.00*
Content: 1 pcs
€23.50*
Content: 1 pcs
22 July 2022 17:05
Alles gut. Tut was er soll.
Alles gut. Tut was er soll.
14 July 2022 09:29
alles ok
alles ok
11 January 2022 00:00
Machine Tap
Not yet used
15 February 2018 00:00
Alles Top
Es gibt nicht viel zu sagen zu einem Gewindebohrer, er schneidet das Gewinde so wie es sein soll.
5 February 2018 00:00
guter Gewindebohrer
22 September 2017 00:00
sehr gut
Schneidet ohne Probleme.
5 February 2015 00:00
Gut und preiswert
17 December 2014 00:00
sehr gut
Sehr sauber und professionell. Lieferung schnel und unkompliziert. Gerne immer wieder. Hans Myszewsky
9 August 2013 00:00
gutes Preis- Leistungsverhältnis