Skip to main content

Milwaukee SHOCKWAVE bit set screws 75-piece

Intended use

Screwdriver bits, also known as screw bits, are used in cordless screwdrivers. Screwdriver bits are interchangeable screwdriver blades for different screw head profiles. Depending on the screw head profile, the appropriate bit is inserted into the bit holder.

Technical data

Bit holder: 1 x 60 mm
Bits cross recess 25 mm: 1 x PH1, 3 x PH2, 1 x PZ1, 3 x PZ2
Bits cross recess 50 mm: 2 x PH2, 2 x PZ2, 1 x PZ3
For thread size: M5, M6
Hexagon socket width across flats [mm]: 8, 10
Mounting bits: 1/4" hex socket
Torx bits 50 mm: 1 x TX10, 2 x TX15, 3 x TX20, 3 x TX25, 3 x TX30, 3 x TX40
Total length of socket spanner [mm]: 48
Bits Torx 25 mm: 3 x TX10, 3 x TX15, 10 x TX20, 9 x TX25, 9 x TX30, 2 x TX40, 1 x TX50, 1 x TX BO15, 1 x TX BO20, 1 x TX BO25, 1 x TX BO30
Bits Hex 25 mm: 2 x Hex 4 mm, 1 x Hex 5 mm

Set of 72 impact-resistant bits, two magnetic socket spanners and a magnetic bit holder

High-quality screwdriver bits with ¼" hex socket

Bit length 25 and 50 mm

Magnetic bit holder with 60 mm length

Stored in PACKOUT compatible cassette

Description of the

This bit set has been specially developed for use with impact screwdrivers and contains 72 bits, a magnetic bit holder and two magnetic socket spanners. Both the bit body and the bit holder are made from a steel alloy specially developed for Milwaukee and absorb the effects of impact thanks to a special hardening process and the SHOCK ZONE. The bit tips are laser-hardened for a precise fit and to increase the service life. For easy identification, all bits are laser-marked and labelled with the respective type designation. The set is supplied in a PACKOUT-compatible cassette. The bits in this set are manufactured in accordance with DIN 3126 - C 6.3.

Scope of delivery

  • 1 x PH1 bit, 25 mm
  • 3 x PH2 bit, 25 mm
  • 1 x PZ1 bit, 25 mm
  • 3 x PZ2 bit, 25 mm
  • 3 x TX10 bit, 25 mm
  • 3 x TX15 bit, 25 mm
  • 10 x TX20 bit, 25 mm
  • 9 x TX25 bit, 25 mm
  • 9 x TX30 bit, 25 mm
  • 2 x TX40 bit, 25 mm
  • 1 x TX50 bit, 25 mm
  • 1 x TX BO15 bit, 25 mm
  • 1 x TX BO20 bit, 25 mm
  • 1 x TX BO25 bit, 25 mm
  • 1 x TX BO30 bit, 25 mm
  • 2 x Bit Hex 4 mm, 25 mm
  • 1 x bit Hex 5 mm, 25 mm
  • 2 x PH2 bit, 50 mm
  • 2 x PZ2 bit, 50 mm
  • 1 x PZ3 bit, 50 mm
  • 1 x TX10 bit, 50 mm
  • 2 x TX15 bit, 50 mm
  • 3 x TX20 bit, 50 mm
  • 3 x TX25 bit, 50 mm
  • 3 x TX30 bit, 50 mm
  • 3 x TX40 bit, 50 mm
  • 1 x magnetic socket spanner Hex 8 mm, 48 mm
  • 1 x magnetic socket spanner Hex 10 mm, 48 mm
  • 1 x magnetic bit holder, 60 mm

More about the brand and products from 

Product comparison
Article image
Open, red Milwaukee SHOCKWAVE bit set, 75-piece, showing screw bits and socket spanners in compartments, some under a transparent lid.
Open screwdriver bit cassette from Milwaukee with 27 pieces. Various bits and a bit holder in a black storage box with a red lid.
Milwaukee Screwdriver bit cassette with 12 bits in black storage box. Two bits on red holder next to it.
Red, open Milwaukee SHOCKWAVE Puck Set with bits and bit holder, in circular storage box.
Milwaukee SHOCKWAVE bit set, 12-piece. Red bit holder with various bits and grey magnetic bit holder with inserted bit.
A red, open bit set from Milwaukee SHOCKWAVE with 32 pieces on a white background. The bits are arranged in rows and have different shapes.
Open, red Milwaukee SHOCKWAVE bit set, 32-piece, with various bits and holders in an organised arrangement. The brand name can be seen on the lid.
A red bit set with 10 pieces from the brand Milwaukee, with bit attachments in a row on a holder, with a black snap hook.
Open, red bit set from Milwaukee SHOCKWAVE, filled with various screw bits and socket spanners. The lid is transparent.
Open, red tool box with drill and screwdriver bit set. The bits are clearly arranged in rows. Gold-coloured drill bits and black bit holders can also be seen.
Open, red bit set from Milwaukee with various screwdriver bits and drill bits. Laser-marked SHOCKWAVE bits are clearly arranged.
Open, red Milwaukee SHOCKWAVE bit set with various bits and a bit holder.
Open red SHOCKWAVE bit set from Milwaukee with various screw bits and magnetic socket spanners. The bits are neatly organised in the box.
Open, red Milwaukee SHOCKWAVE bit set with various screwdriver bits and transparent lid.
10-piece SHOCKWAVE bit set from Milwaukee on red bar with black snap hook. Silver-coloured bits, red shaft, with Milwaukee lettering.
Product title
Milwaukee SHOCKWAVE bit set screws 75-piece
Milwaukee screwdriver bit cassette 27-piece
Milwaukee screwdriver bit cassette 12-piece
Milwaukee SHOCKWAVE Puck Set 15-piece
Milwaukee SHOCKWAVE Drive Guide bit set 12-piece
Milwaukee SHOCKWAVE Compact set 32-piece
Milwaukee SHOCKWAVE Compact bit set 32-piece TX
Milwaukee SHOCKWAVE Carabiner bit set 10-piece
Milwaukee SHOCKWAVE bit set screws 35-piece
Milwaukee SHOCKWAVE Bit Set Drilling & Screws 40-piece
Milwaukee SHOCKWAVE Bit Set Drilling & Screws 48-piece
Milwaukee SHOCKWAVE 56-piece bit set
Milwaukee SHOCKWAVE Bit set screws 70 pieces
Milwaukee SHOCKWAVE bit set screws 38-piece
Milwaukee SHOCKWAVE Carabiner bit set 10-piece
Valuation
Description of the

This bit set has been specially developed for use with impact screwdrivers and contains 72 bits, a magnetic bit holder and two magnetic socket spanners. Both the bit body and the bit holder are made from a steel alloy specially developed for Milwaukee and absorb the effects of impact thanks to a special hardening process and the SHOCK ZONE. The bit tips are laser-hardened for a precise fit and to increase the service life. For easy identification, all bits are laser-marked and labelled with the respective type designation. The set is supplied in a PACKOUT-compatible cassette. The bits in this set are manufactured in accordance with DIN 3126 - C 6.3.

This bit set contains 26 bits and a magnetic bit holder with quick-change adapter. The bit body is made of high-quality S2 tool steel. The cold-formed bits are characterised by their precise fit and wear resistance. During production, the bit tip is hardened in a special process at temperatures of up to 870° C. This results in a 60 HRC hardness. This results in a 60-HRC-hardened bit with a particularly durable bit tip. For easy identification, all bits are laser-marked and labelled with the respective type designation. This set is supplied in a practical storage box. The bits in this set are manufactured in accordance with DIN 3126 - C 6.3.

This bit set contains 11 bits and a magnetic bit holder with quick-change adapter. The bit body is made of high-quality S2 tool steel. The cold-formed bits are characterised by their precise fit and wear resistance. During production, the bit tip is hardened in a special process at temperatures of up to 870° C. This results in a 60-HRC hardness. This results in a 60-HRC-hardened bit with a particularly durable bit tip. For easy identification, all bits are laser-marked and labelled with the respective type designation. This set is supplied in a practical storage box. The 25 mm long bits are manufactured in accordance with DIN 3126 - C 6.3, the 50 mm long bits comply with DIN 3126 - E 3.6.

This bit set has been specially developed for use with impact screwdrivers and contains 14 bits and a magnetic bit holder. Both the bit body and the bit holder are made from a steel alloy specially developed for Milwaukee and absorb the effects of impact thanks to a special hardening process and the SHOCK ZONE. The bit tips are laser-hardened for a precise fit and to increase the service life. For easy identification, all bits are laser-marked and labelled with the respective type designation. This set is supplied in a practical storage box. The bits in this set are manufactured in accordance with DIN 3126 - C 6.3.

This bit set has been specially developed for use with impact screwdrivers and contains 11 bits and a magnetic bit holder. Both the bit body and the bit holder are made from a steel alloy specially developed for Milwaukee and absorb the effects of impact thanks to a special hardening process and the SHOCK ZONE. The bit tips are laser-hardened for a precise fit and to increase the service life. For easy identification, all bits are laser-marked and labelled with the respective type designation. This set is supplied in the Drive Guide bit holder with integrated screw guide sleeve, which can be extended to 110 mm. The bits in this set are manufactured in accordance with DIN 3126 - C 6.3. The Drive Guide bit holder also has a stripping function for Ă˜ 0.75 / 1.0 / 1.5 and 2.5 mm².

This bit set has been specially developed for use with impact screwdrivers and contains 31 bits and a magnetic bit holder with quick-change adapter. Both the bit body and the bit holder are made from a steel alloy specially developed for Milwaukee and absorb the effects of impact thanks to a special hardening process and the SHOCK ZONE. The bit tips are laser-hardened for a precise fit and to increase the service life. For easy identification, all bits are laser-marked and labelled with the respective type designation. This set is supplied in a practical storage box. The bits in this set are manufactured in accordance with DIN 3126 - C 6.3.

This bit set has been specially developed for use with impact screwdrivers and contains 31 bits and a magnetic bit holder with quick-change adapter. Both the bit body and the bit holder are made from a steel alloy specially developed for Milwaukee and absorb the effects of impact thanks to a special hardening process and the SHOCK ZONE. The bit tips are laser-hardened for a precise fit and to increase the service life. For easy identification, all bits are laser-marked and labelled with the respective type designation. This set is supplied in a practical storage box. The bits in this set are manufactured in accordance with DIN 3126 - C 6.3.

This bit set has been specially developed for use with impact screwdrivers and contains 10 bits. Both the bit body and the bit holder are made from a steel alloy specially developed for Milwaukee and absorb the effects of impact thanks to a special hardening process and the SHOCK ZONE. The bit tips are laser-hardened for a precise fit and to increase the service life. For easy identification, all bits are laser-marked and labelled with the respective type designation. The bits are supplied inserted into a rail. The attached carabiner allows the rail to be quickly attached to a trouser belt, for example. The bits in this set are manufactured in accordance with DIN 3126 - C 6.3.

This bit set has been specially developed for use with impact screwdrivers and contains 31 bits, a magnetic bit holder and three magnetic socket spanners. Both the bit body and the bit holder are made from a steel alloy specially developed for Milwaukee and absorb the effects of impact thanks to a special hardening process and the SHOCK ZONE. The bit tips are laser-hardened for a precise fit and to increase the service life. For easy identification, all bits are laser-marked and labelled with the respective type designation. The set is supplied in a PACKOUT-compatible cassette. The bits in this set are manufactured in accordance with DIN 3126 - C 6.3.

This bit set has been specially developed for use with impact screwdrivers and contains 33 bits, three impact-resistant, TiN-coated metal drill bits, two magnetic bit holders and two magnetic socket spanners. Both the bit body and the bit holder are made from a steel alloy specially developed for Milwaukee and absorb the effects of impact thanks to a special hardening process and the SHOCK ZONE. The bit tips are laser-hardened for a precise fit and to increase the service life. For easy identification, all bits are laser-marked and labelled with the respective type designation. The set is supplied in a PACKOUT-compatible cassette. The bits in this set are manufactured in accordance with DIN 3126 - C 6.3.

This bit set has been specially developed for use with impact screwdrivers and contains 44 bits, three impact-resistant multi-material drill bits and a magnetic bit holder. Both the bit body and the bit holder are made from a steel alloy specially developed for Milwaukee and absorb the effects of impact thanks to a special hardening process and the SHOCK ZONE. The bit tips are laser-hardened for a precise fit and to increase the service life. For easy identification, all bits are laser-marked and labelled with the respective type designation. The set is supplied in a PACKOUT-compatible cassette. The bits in this set are manufactured in accordance with DIN 3126 - C 6.3.

This bit set has been specially developed for use with impact screwdrivers and contains 55 bits and a magnetic bit holder. Both the bit body and the bit holder are made from a steel alloy specially developed for Milwaukee and absorb the effects of impact thanks to a special hardening process and the SHOCK ZONE. The bit tips are laser-hardened for a precise fit and to increase the service life. For easy identification, all bits are laser-marked and labelled with the respective type designation. The set is supplied in a PACKOUT-compatible cassette. The bits in this set are manufactured in accordance with DIN 3126 - C 6.3.

This bit set has been specially developed for use with impact screwdrivers and contains 67 bits, a magnetic bit holder and two magnetic socket spanners. Both the bit body and the bit holder are made of a steel alloy specially developed for Milwaukee and absorb the effects of impact thanks to a special hardening process and the SHOCK ZONE. The bit tips are laser-hardened for a precise fit and to increase the service life. For easy identification, all bits are laser-marked and labelled with the respective type designation. The set is supplied in a PACKOUT-compatible cassette. The bits in this set are manufactured in accordance with DIN 3126 - C 6.3.

This bit set has been specially developed for use with impact screwdrivers and contains 37 bits and a magnetic bit holder. Both the bit body and the bit holder are made from a steel alloy specially developed for Milwaukee and absorb the effects of impact thanks to a special hardening process and the SHOCK ZONE. The bit tips are laser-hardened for a precise fit and to increase the service life. For easy identification, all bits are laser-marked and labelled with the respective type designation. The set is supplied in a PACKOUT-compatible cassette. The bits in this set are manufactured in accordance with DIN 3126 - C 6.3.

This bit set has been specially developed for use with impact screwdrivers and contains 10 bits. Both the bit body and the bit holder are made from a steel alloy specially developed for Milwaukee and absorb the effects of impact thanks to a special hardening process and the SHOCK ZONE. The bit tips are laser-hardened for a precise fit and to increase the service life. For easy identification, all bits are laser-marked and labelled with the respective type designation. The bits are supplied inserted into a rail. The attached carabiner allows the rail to be quickly attached to a trouser belt, for example. The bits in this set are manufactured in accordance with DIN 3126 - C 6.3.

Price

€81.70*

Content: 1 pcs

€29.70*

Content: 1 pcs

€25.40*

Content: 1 pcs

€17.20*

Content: 1 pcs

€25.90*

Content: 1 pcs

€22.20*

Content: 1 pcs

€22.20*

Content: 1 pcs

€9.00*

Content: 1 pcs

€52.90*

Content: 1 pcs

€75.40*

Content: 1 pcs

€64.50*

Content: 1 pcs

€53.70*

Content: 1 pcs

€73.20*

Content: 1 pcs

€48.80*

Content: 1 pcs

€9.00*

Content: 1 pcs

Bit holder
1 x 60 mm
1 x 58 mm
1 x 58 mm
1 x 60 mm
1 x 76 mm
1 x 73 mm
1 x 73 mm
-
1 x 60 mm
1 x 60 mm, 1 x 152 mm
1 x 60 mm
1 x 60 mm
1 x 60 mm
1 x 60 mm
-
Bits cross recess 25 mm
1 x PH1, 3 x PH2, 1 x PZ1, 3 x PZ2
1 x PH3; 2 x PH1; 2 x PH2; 2 x PZ1; 2 x PZ3; 4 x PZ2
1 x PH1; 1 x PH3; 1 x PZ1; 1 x PZ3; 2 x PH2; 2 x PZ2
1 x PH1; 1 x PZ1; 1 x PZ3; 2 x PH2; 2 x PZ2
1 x PH2, 1 x PZ1, 2 x PZ2, 1 x PZ3
1 x PH1; 1 x PH3; 1 x PZ1; 1 x PZ3; 2 x PH2; 2 x PZ2
-
-
1 x PH1, 3 x PH2, 1 x PH3, 2 x PZ1, 3 x PZ2, 1 x PZ3
1 x PH1, 2 x PH2, 1 x PZ1, 3 x PZ2
1 x PH1, 3 x PH2, 1 x PH3, 1 x PZ1, 3 x PZ2, 1 x PZ3
2 x PH1, 4 x PH2, 1 x PH3, 3 x PZ1, 4 x PZ2, 2 x PZ3
1 x PH1, 2 x PH2, 3 x PZ1, 24 x PZ2, 5 x PZ3
1 x PH1, 2 x PH2, 1 x PZ1, 2 x PZ2
1 x PH1, 2 x PH2, 1 x PZ1, 2 x PZ2
Bits cross recess 50 mm
2 x PH2, 2 x PZ2, 1 x PZ3
-
1 x PH2; 1 x PZ2
-
-
-
-
2 x PH2, 1 x PZ2
1 x PH2, 1 x PZ2
1 x PH2, 1 x PZ2
2 x PH2, 1 x PH3, 2 x PZ2, 1 x PZ3
1 x PH2, 1 x PZ2
1 x PH1, 3 x PH2, 1 x PZ1, 5 x PZ2, 3 x PZ3
1 x PH1, 3 x PH2, 1 x PH3, 1 x PZ1, 3 x PZ2, 1 x PZ3
-
For thread size
M5, M6
-
-
-
-
-
-
-
M4, M5, M6
M5, M6
-
-
M5, M6
-
-
Hexagon socket width across flats [mm]
8, 10
-
-
-
-
-
-
-
7, 8, 10
8, 10
-
-
8, 10
-
-
Mounting bits
1/4" hex socket
1/4" hex socket
1/4" hex socket
1/4" hex socket
1/4" hex socket
1/4" hex socket
1/4" hex socket
1/4" hex socket
1/4" hex socket
1/4" hex socket
1/4" hex socket
1/4" hex socket
1/4" hex socket
1/4" hex socket
1/4" hex socket
Torx bits 50 mm
1 x TX10, 2 x TX15, 3 x TX20, 3 x TX25, 3 x TX30, 3 x TX40
-
-
-
-
-
-
1 x TX15, 2 x TX20, 2 x TX25, 1 x TX30, 1 x TX40
1 x TX15, 1 x TX20, 1 x TX25, 1 x TX30, 1 x TX40
1 x TX10, 1 x TX15, 1 x TX20, 1 x TX25, 1 x TX30, 1 x TX40
1 x TX10, 1 x TX15, 2 x TX20, 2 x TX25, 2 x TX30, 2 x TX40
1 x TX15, 1 x TX20, 1 x TX25, 1 x TX30, 1 x TX40
1 x TX20, 1 x TX25, 2 x TX30, 2 x TX40
1 x TX10, 1 x TX15, 1 x TX20, 2 x TX25, 3 x TX30, 3 x TX40
1 x TX20, 1 x TX25
Total length of socket spanner [mm]
48
-
-
-
-
-
-
-
48
48
-
-
48
-
-
Bits Torx 25 mm
3 x TX10, 3 x TX15, 10 x TX20, 9 x TX25, 9 x TX30, 2 x TX40, 1 x TX50, 1 x TX BO15, 1 x TX BO20, 1 x TX BO25, 1 x TX BO30
1 x TX30; 1 x TX40; 2 x TX10; 3 x TX15; 3 x TX20; 3 x TX25
-
1 x TX10; 1 x TX25; 1 x TX30; 2 x TX15; 2 x TX20
1 x TX15, 1 x TX20, 2 x TX25, 1 x TX30, 1 x TX40
1 x TX40; 1 x TX B08; 1 x TX BO7; 1 x TX BO9; 1 x TX BO10; 1 x TX BO15; 1 x TX BO20; 1 x TX BO25; 2 x TX10; 2 x TX15; 2 x TX25; 2 x TX30; 3 x TX20
2 x TX10, 4 x TX15, 5 x TX20, 5 x TX25, 5 x TX30, 2 x TX40, 1 x TX50, 1 x TX BO7, 1 x TX BO8, 1 x TX BO9, 1 x TX BO10, 1 x TX BO15, 1 x TX BO20, 1 x TX BO25
-
2 x TX10, 2 x TX15, 3 x TX20, 3 x TX25, 2 x TX30, 1 x TX40
2 x TX10, 2 x TX15, 3 x TX20, 3 x TX25, 2 x TX30, 1 x TX40
2 x TX10, 1 x TX15, 3 x TX20, 3 x TX25, 2 x TX30, 1 x TX40
3 x TX10, 3 x TX15, 5 x TX20, 5 x TX25, 4 x TX30, 3 x TX40, 2 x TX50
1 x TX10, 1 x TX15, 2 x TX20, 2 x TX25, 2 x TX30, 1 x TX40
1 x TX10, 1 x TX15, 2 x TX20, 3 x TX25, 2 x TX30, 1 x TX40
-
Bits Hex 25 mm
2 x Hex 4 mm, 1 x Hex 5 mm
-
-
-
-
1 x Hex 3 mm; 1 x Hex 4 mm; 1 x Hex 5 mm; 1 x Hex 6 mm
-
-
-
1 x hex 4 mm, 1 x hex 5 mm
1 x Hex 4mm; 1 x Hex 5mm
2 x Hex 4 mm, 2 x Hex 5 mm
2 x Hex 4 mm, 2 x Hex 5 mm
-
-
Bit body material
-
Hardened; S2 tool steel
Hardened; S2 tool steel
-
-
-
-
-
-
-
-
-
-
-
-
Bit hardness [HRC]
-
60
60
-
-
-
-
-
-
-
-
-
-
-
-
Bits slot 25 mm
-
-
1 x SL 0.8 x 5.5
-
-
-
-
-
-
1 x SL 0.6 x 4.5, 1 x SL 0.8 x 5.5, 1 x SL 1.2 x 6.5
-
1 x SL 0.6 x 4.5, 1 x SL 0.8 x 5.5, 1 x SL 1.2 x 6.5
-
-
-
Diameter metal drill [mm]
-
-
-
-
-
-
-
-
-
3, 4, 5
-
-
-
-
-
Drill holder
-
-
-
-
-
-
-
-
-
1/4" hex socket
1/4" hex socket
-
-
-
-
Material Metal drill bit
-
-
-
-
-
-
-
-
-
HSS-G, TiN-coated
-
-
-
-
-
Bits cross recess 90 mm
-
-
-
-
-
-
-
-
-
-
1 x PH2, 1 x PZ2
-
-
-
-
Diameter multi-material drill [mm]
-
-
-
-
-
-
-
-
-
-
5, 6, 8
-
-
-
-
Torx 90 mm bits
-
-
-
-
-
-
-
-
-
-
1 x TX20; 1 x TX25
-
-
-
-

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.

Excellent

Very good

Good

Acceptable

Unsatisfactory

This site is protected by reCAPTCHA and the Privacy Policy and Terms of Use apply.

Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
Techtronic Industries GmbH
Max-Eyth-Str. 10
71364 Winnenden, Deutschland
info.ce@tti-emea.com