Pull-down clamp M6 / 8 mm, 45 mm jaw width
€21.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Pull-down clamps are used when workpieces are to be clamped directly onto the worktable of a milling machine. With pull-down clamps, the workpiece is clamped laterally, leaving the entire surface of the workpiece free for machining. One advantage of this clamping method is that the clamping range is extremely flexible, depending on the size of the worktable.
Technical data
| For groove width [mm]: | 8 |
|---|---|
| Hardness [HRC]: | 50 |
| Jaw height [mm]: | 19 |
| Jaw width [mm]: | 45 |
| Material: | Steel, hardened |
For clamping workpieces directly on the worktable
Lateral clamping leaves the entire workpiece surface free for machining
For slot width M6 (8 mm)
Jaw width 45 mm
Hardened (50 HRC)
Description of the
Made from hardened steel, this pull-down clamp has a jaw width of 45 mm and a jaw height of 19 mm. The pull-down clamp is placed directly on the worktable via the T-slots in the worktable. This means that the clamping width is only limited by the width of the worktable, allowing larger workpieces to be clamped directly on a worktable.
Scope of delivery
- 1 x pull-down clamp, 50 mm jaw width
- 2 x screw M6 x 25
- 2 x T-slot stone M6
More about the brand and products fromÂ
Made from hardened steel, this pull-down clamp has a jaw width of 45 mm and a jaw height of 19 mm. The pull-down clamp is placed directly on the worktable via the T-slots in the worktable. This means that the clamping width is only limited by the width of the worktable, allowing larger workpieces to be clamped directly on a worktable.
Made from hardened steel, this pull-down clamp has a jaw width of 45 mm and a jaw height of 19 mm. The pull-down clamp is placed directly on the worktable via the T-slots in the worktable. This means that the clamping width is only limited by the width of the worktable, allowing larger workpieces to be clamped directly on a worktable.
Made from hardened steel, this pull-down clamp has a jaw width of 50 mm and a jaw height of 24 mm. The pull-down clamp is placed directly on the worktable via the T-slots in the worktable. This means that the clamping width is only limited by the width of the worktable, which means that larger workpieces can also be clamped directly on a worktable.
Made from hardened steel, this pull-down clamp has a jaw width of 50 mm and a jaw height of 24 mm. The pull-down clamp is placed directly on the worktable via the T-slots in the worktable. This means that the clamping width is only limited by the width of the worktable, which means that larger workpieces can also be clamped directly on a worktable.
This two-part, very solid pull-down vice is made of nodular cast iron (cast iron with spheroidal graphite). Spheroidal graphite cast iron is a type of cast iron that has mechanical properties similar to steel due to the carbon contained in its spherical shape.
The replaceable jaws made of C45E steel are hardened and ground. The grooves milled into the jaws increase the holding force, making it more difficult for the workpiece to slip out. This two-part vice can be used to clamp both larger workpieces and workpieces whose clamping surfaces are not parallel to each other on the machine table.
Due to the design of this type of pull-down vice, the forces exerted when clamping the workpiece act very strongly in the direction of the machine table, preventing the workpiece from standing up during milling. The solid design ensures that the workpiece is clamped securely and quickly. The vice is fastened with clamping elements such as sliding blocks with threaded rods and collar nuts.
This two-piece, very solid pull-down vice is made of nodular cast iron (cast iron with spheroidal graphite). Spheroidal graphite cast iron is a type of cast iron which has mechanical properties similar to steel due to the carbon contained in its spherical shape. The replaceable jaws made of C45E steel are hardened and ground. The grooves milled into the jaws increase the holding force, making it more difficult for the workpiece to slip out. This two-part vice can be used to clamp both larger workpieces and workpieces whose clamping surfaces are not parallel to each other on the machine table. Due to the design of this type of pull-down vice, the forces exerted when clamping the workpiece act very strongly in the direction of the machine table, preventing the workpiece from standing up during milling. The solid design ensures that the workpiece is clamped securely and quickly. The vice is fastened with clamping elements such as sliding blocks with threaded rods and collar nuts.
€21.50*
Content: 1 pcs
€22.00*
Content: 1 pcs
€22.50*
Content: 1 pcs
€23.00*
Content: 1 pcs
€160.00*
Content: 1 Piece
€239.00*
Content: 1 pcs
10 November 2025 14:00
Gut, noch verbesserungsfähig/erweiterbar
Ich kann nur vom ersten Eindruck berichten, da ich den Niederzugspanner noch nicht benutzt, aber ausgepackt habe. Erster Eindruck sauber gearbeitet, recht spielfreie Passung auf dem Gleitweg, ordenlicht entgratet und kamen leicht eingeölt verpackt. Schade sind die"winzigen Nutensteine. Diese Größe für 8mm Nuten sind selten und werden wohl auch nur im Hobbyfräsbereich Verwendung finden. Im Hobbybereich sind fast alle T-Nutenplatten aus Alu gefertigt. In dem Bemühen den Spaner richtig fest zu ziehen düften sich diese Mini Nutensteine aus gehärtetem Stahl wohl sofort ins weichere Alu der Spanntische eidrücken. Eine M6 Schraube hat schon ordentlich Kraft, wenn man sie anzieht. Diese Nutensteine sind so klein, dass sie einem Ruckzuck die Nutenbahnen zerquetschen dürften. Für 1 Euro mehr lieber gleich verlängerte Nutensteine von 20mm Länge beilegen, die diese Gefahr nicht so haben. Die Beiliegenden kann man eigentlich für die CNC Fräse nicht verwenden und nur wegschmeißen. Schade um den Rohstoff. Schön wäre auch, wenn es die Spannbacke (vielleicht als Zubehör?) auch mit Messerkante und eine mit mehreren Messerkanten über die ganze Höhe verteilt gäbe, womit sich nicht symmetrisches Rohmaterial wie Holz, weitaus besser spannen ließe, als mit 90 Grad Glattbacken. Die Messerkanten könnten sich ins Holz drücken und es besser packen/halten, als mit glatter Kante.
1 July 2025 14:56
Super
Super
13 February 2025 22:40
Gibt es in dieser Größe nach meiner
Gibt es in dieser Größe nach meiner Erfahrung von keinem anderen Anbieter, passen perfekt zu meiner Proxxon Feinfräse FF 500 BL
21 May 2024 19:42
Gutes Spannsystem, flexibel zu verwenden
Gut verarbeitet, erfüllt seine Aufgabe gut. Die Nutensteine sind für meine Proxxon Fräse unten ein wenig zu breit, die Schrauben ein wenig zu lang. Alles in allem aber kein Problem…
4 March 2024 16:41
Pièces de qualités fabriquées avec précision !
Pièces de qualités fabriquées avec précision !
