Solid carbide finishing cutter Ø 12.0 mm 35° with AlTiN coating, 4-edged
€39.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
End mills are used for carving out pockets, producing grooves or contours, as well as for milling over surfaces or edges. With a finishing cutter, very good dimensional accuracy and a smooth surface can be achieved at high speeds and low feed rates.
Technical data
| Angle flute [°]: | 35 |
|---|---|
| Cutting edge length [mm]: | 30 |
| Number of cutting edges: | 4 |
| Shank length [mm]: | 45 |
| Surface coating: | AlTiN |
| Tool material: | Carbide |
| Total length [mm]: | 75 |
| Ø milling cutter [mm]: | 12,0 |
| Ø shaft [mm]: | 12 |
Milling cutter made of carbide (tungsten carbide-cobalt)
Very high heat and oxidation resistance due to AlTiN coating
Ground over the centre for direct plunging into the workpiece
Higher cutting speeds possible compared to milling cutters with TiN coating
Increased tool life
Description of the
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
Scope of delivery
- 1 x solid carbide finishing cutter Ø 12.0 mm 35° with AlTiN coating, 4-edged
More about the brand and products from
Further information on our professional line
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating):
Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
€39.00*
Content: 1 pcs
€6.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€9.00*
Content: 1 pcs
€15.50*
Content: 1 pcs
€25.00*
Content: 1 pcs
€32.00*
Content: 1 pcs
8 July 2024 22:36
Die Qualität ist sehr gut, leider ist
Die Qualität ist sehr gut, leider ist der Fräser noch immer zu klein gewesen für meine Ansprüche. Auch wäre spannend woher dieser wirklich kommt da so günstig VHM fräser Typischerweise nicht hier produziert werden..
2 July 2024 06:05
Scharfe Sache
Damit habe ich schon eine Menge hochfesten Stahl in Späne verwandelt.
6 May 2021 00:00
Oberfläche
sehr schön
26 November 2020 00:00
Werkzeug für Sieg SX4
fehlerfrei und maßhaltig - hoffe auf lange "Zusammenarbeit" :-)
20 June 2020 00:00
Einwandfrei
Gute Qualität
23 March 2020 00:00
Qualitätsprodukt, sehr gut!
Sehr gutes Qualität-Preisverhältnis