Solid carbide finishing cutter Ø 2.0 mm 35° with AlTiN coating, 4-edged
€6.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
End mills are used for carving out pockets, producing grooves or contours, as well as for milling over surfaces or edges. With a finishing cutter, very good dimensional accuracy and a smooth surface can be achieved at high speeds and low feed rates.
Technical data
| Angle flute [°]: | 35 |
|---|---|
| Cutting edge length [mm]: | 5 |
| Number of cutting edges: | 4 |
| Shank length [mm]: | 45 |
| Surface coating: | AlTiN |
| Tool material: | Carbide |
| Total length [mm]: | 50 |
| Ø milling cutter [mm]: | 2,0 |
| Ø shaft [mm]: | 4 |
Milling cutter made of carbide (tungsten carbide-cobalt)
Very high heat and oxidation resistance due to AlTiN coating
Ground over the centre for direct plunging into the workpiece
Higher cutting speeds possible compared to milling cutters with TiN coating
Increased tool life
Description of the
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
Scope of delivery
- 1 x solid carbide finishing cutter Ø 2.0 mm 35° with AlTiN coating, 4-edged
More about the brand and products from
Further information on our professional line
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitride coating (AlTiN coating):
Aluminium-titanium-nitride (AlTiN) is a compound of aluminium, titanium and nitrogen; it is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiN coating has a cutting edge ground over the centre for direct plunging into the workpiece; this eliminates the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-nitrogen coating (AlTiN coating):
It is an all-round coating that is suitable for universal use. The AlTiN coating allows hard materials such as steel or stainless steel to be machined, as well as materials such as brass, bronze or plastic. Another advantage over uncoated tools or tools with a TiN coating is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
€6.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€6.50*
Content: 1 pcs
€9.00*
Content: 1 pcs
€15.50*
Content: 1 pcs
€25.00*
Content: 1 pcs
€32.00*
Content: 1 pcs
€39.00*
Content: 1 pcs
7 March 2024 21:37
Top Qualität zum angemessenen Preis
Top Qualität zum angemessenen Preis
3 April 2022 17:01
VHM Fräser
Super Fräser
9 April 2019 00:00
Alles bestens.
Preis, Leistung und Versand alles betsens. Jederzeit wieder.