Solid carbide finishing cutter Ø 2.5 mm 35° with AlTiSiN coating, 4-edged
€7.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
End mills are used for carving out pockets, producing grooves or contours, as well as for milling over surfaces or edges. With a finishing cutter, very good dimensional accuracy and a smooth surface can be achieved at high speeds and low feed rates.
Technical data
| Angle flute [°]: | 35 |
|---|---|
| Cutting edge length [mm]: | 7,5 |
| Number of cutting edges: | 4 |
| Shank length [mm]: | 42,5 |
| Surface coating: | AlTiSiN |
| Tool material: | Carbide |
| Total length [mm]: | 50 |
| Ø milling cutter [mm]: | 2,5 |
| Ø shaft [mm]: | 4 |
Milling cutter made of carbide (tungsten carbide-cobalt)
For use at high cutting temperatures with low cooling
Ground over the centre for direct plunging into the workpiece
For use with very hard materials that are difficult to machine
Very good tool life
Description of the
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
Scope of delivery
- 1 x solid carbide finishing cutter Ø 2.5 mm 35° with AlTiSiN coating, 4-edged
More about the brand and products from
Further information on our professional line
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
€7.50*
Content: 1 pcs
€7.50*
Content: 1 pcs
€7.50*
Content: 1 pcs
€7.50*
Content: 1 pcs
€7.50*
Content: 1 pcs
€11.00*
Content: 1 pcs
€18.00*
Content: 1 pcs
€25.00*
Content: 1 pcs
€35.00*
Content: 1 pcs
€45.00*
Content: 1 pcs
9 January 2020 00:00
Gutes Werkzeug
Für Modellbau 1:14 gut geeignet. Standzeit , bei korrekter Drehzahl (optional Kühlung) sehr gut. Ich habe mit diesem Werkzeug Werkzeugstahl bearbeitet.
5 January 2020 00:00
VHM Fräser mit kleinem Durchmesser
Guter VHM Fräser, besonders geeignet, wenn ein langer Fräser nötig ist
5 January 2020 00:00
präzise und stabil - gute Standzeit
Ich bearbeite hauptsächlich Aluminium, Messing, Kunststoff und Zinkdruckguss mit dem Fräser. Der Fräser hat einen exakten Rundlauf und es ist ein - für meine Begriffe - präzises Arbeiten damit möglich
13 April 2019 00:00
guter Fräser!
Profifräster
3 March 2019 00:00
Gutes Produkt
Entspricht den Anweisungen des Verkäufers
3 March 2019 00:00
Gutes Produkt
Entspricht den Anweisungen des Verkäufers