Solid carbide finishing cutter Ø 4.0 mm 35° with AlTiSiN coating, 4-edged
€8.00*
% €11.00* (27.27% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Intended use
Shank cutters are used for machining pockets, creating grooves or contours, as well as for finishing surfaces or edges. With a finishing cutter, excellent dimensional accuracy and a smooth surface finish can be achieved at high rotational speeds combined with a low feed rate.
Technical data
| Angle flute [°]: | 35 |
|---|---|
| Cutting edge length [mm]: | 15 |
| Number of cutting edges: | 4 |
| Shank length [mm]: | 60 |
| Surface coating: | AlTiSiN |
| Tool material: | Carbide |
| Total length [mm]: | 75 |
| Ø milling cutter [mm]: | 4,0 |
| Ø shaft [mm]: | 4 |
Carbide cutters (tungsten carbide-cobalt)
For use at high cutting temperatures with minimal cooling
Ground through the centre for direct plunge cutting into the workpiece
For use with very hard materials that are difficult to machine
Very good tool life
Description of the
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
Scope of delivery
- 1 x solid carbide finishing cutter, Ø 4.0 mm, 35°, with AlTiSiN coating, 4-fluted
More about the brand and products from
Further information on our professional line
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
€8.00*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€13.00*
Contents: 1 pcs
€19.50*
Contents: 1 pcs
€26.50*
Contents: 1 pcs
€34.50*
Contents: 1 pcs
5 Reviews
2 February 2023 15:51
alles Ok
alles Ok
4 January 2023 09:58
Sehr guter Fräser
Verwende diesen Fräser im Modellbau, vor allem für Messingbearbeitung. Bin beeindruckt, wie präzise der Fräser arbeitet. Bei kleiner Zustellung ist er so leise, dass man auch in einer Mietwohnung fräsen kann, ohne die Familie oder die Nachbarn zu stören!
14 October 2022 11:36
Qualität und Leistung sehr gut und Preis
Qualität und Leistung sehr gut und Preis Leistung sehr gut.
29 January 2021 00:00
Verwendung zum Aluminium Fräsen.
Schnittgeschwindigkeit und Kühlwasser sind die wichtigen Parameter. Diese Parameter müssen richtig eingestellt sein, dann ist das Fräsen erfolgreich.
5 January 2020 00:00
VHM Fräser mit kleinem Durchmesser
Guter VHM Fräser, besonders geeignet, wenn ein langer Fräser nötig ist