Solid carbide finishing cutter Ø 6.0 mm 35° with AlTiSiN coating, 4-edged
Intended use
Shank cutters are used for machining pockets, creating grooves or contours, as well as for finishing surfaces or edges. With a finishing cutter, excellent dimensional accuracy and a smooth surface finish can be achieved at high rotational speeds combined with a low feed rate.
Technical data
| Angle flute [°]: | 35 |
|---|---|
| Cutting edge length [mm]: | 24 |
| Number of cutting edges: | 4 |
| Shank length [mm]: | 51 |
| Surface coating: | AlTiSiN |
| Tool material: | Carbide |
| Total length [mm]: | 75 |
| Ø milling cutter [mm]: | 6,0 |
| Ø shaft [mm]: | 6 |
Carbide cutters (tungsten carbide-cobalt)
For use at high cutting temperatures with minimal cooling
Ground through the centre for direct plunge cutting into the workpiece
For use with very hard materials that are difficult to machine
Very good tool life
Description of the
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
Scope of delivery
- 1 x solid carbide finishing end mill, Ø 6.0 mm, 35°, with AlTiSiN coating, 4-fluted
More about the brand and products from
Further information on our professional line
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
The four-edged carbide finishing cutter made of tungsten carbide-cobalt with an AlTiSiN coating has a cutting edge ground across the centre for direct plunging into the workpiece, eliminating the need for tedious pre-drilling.
The advantages and properties of the aluminium-titanium-silicon-nitrogen coating (AlTiSiN coating):
This coating is intended for use in the machining of hard to very hard materials and therefore for high machining temperatures. The AlTiSiN coating allows hardened, alloyed steels and cast iron to be machined. Another feature of this coating is that it is suitable for dry and wet machining and therefore the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the milling cutter.
€13.00*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€5.50*
Contents: 1 pcs
€8.00*
Contents: 1 pcs
€19.50*
Contents: 1 pcs
€26.50*
Contents: 1 pcs
€34.50*
Contents: 1 pcs
1 - 10 by 11 Reviews
19 January 2024 18:53
Taugt
Taugt
4 January 2023 09:59
Sehr guter Fräser
Verwende diesen Fräser im Modellbau, vor allem für Messingbearbeitung. Bin beeindruckt, wie präzise der Fräser arbeitet. Bei kleiner Zustellung ist er so leise, dass man auch in einer Mietwohnung fräsen kann, ohne die Familie oder die Nachbarn zu stören!
14 October 2022 11:36
Qualität und Leistung sehr gut und Preis
Qualität und Leistung sehr gut und Preis Leistung sehr gut.
19 July 2022 12:55
Wie immer schnell geliefert, gute Qualität, Preis
Wie immer schnell geliefert, gute Qualität, Preis OK.
31 January 2022 00:00
Passt
Mit Spannfläche für Weldon wäre schön
23 March 2021 00:00
Empfehlenswert
Bearbeitung von C45k und 115CrV3 war problemlos und mit gutem Ergebnis möglich
4 March 2021 00:00
sehr gute Qualität
bestens zufrieden
29 December 2020 00:00
HS
Sehr gute Qualität zu Spitzenpreis
9 January 2020 00:00
Gutes Werkzeug
Für Modellbau 1:14 gut geeignet. Standzeit , bei korrekter Drehzahl (optional Kühlung) sehr gut. Ich habe mit diesem Werkzeug Werkzeugstahl bearbeitet.
28 June 2019 00:00
Perfekte, sehr hochwertige Qualität
Hervorragend geeignet für die Edelstahl Bearbeitung, natürlich mit ausreichender Kühlung durch Kühlmittel. Sehr gute Standzeit. Echt empfehlenswert.