Test mandrel MK1, 90 mm
€29.00*
% €33.50* (13.43% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Test mandrels are an important measuring and testing tool when working with machine tools. On milling machines, they can be used to align or check the alignment of the work spindle to the machine table. On lathes, they are used to align the headstock. Due to their high manufacturing accuracy, test mandrels are also suitable for measuring the concentricity of the working spindle of machine tools.
As test mandrels are sensitive measuring equipment, care should be taken to handle and store them carefully.
Technical data
| Length of cylindrical measuring surface [mm]: | 90 |
|---|---|
| Max. Concentricity deviation [mm]: | 0,005 |
| Measuring cylinder diameter [mm]: | 11 |
| Morse taper: | MK1 |
| Surface: | Hardened, ground |
| Total height [mm]: | 151 |
| Material: | 100Cr6 |
For aligning work spindles on machine tools
For the concentricity test of work spindles
Made from 100Cr6 steel
Hardened and ground
Morse taper MK1, total length 151 mm
Description of the
This test mandrel made of 100Cr6 steel with MK1 morse taper is hardened and ground. The cylindrical measuring surface has a length of 90 mm and a diameter of 11 mm. Both ends of the test mandrel have a centring hole. This allows it to be used "between the centres" on lathes to check the alignment of the tailstock.
Scope of delivery
- 1 x test mandrel MK1, 90 mm
More about the brand and products from
This test mandrel made of 100Cr6 steel with MK1 morse taper is hardened and ground. The cylindrical measuring surface has a length of 90 mm and a diameter of 11 mm. Both ends of the test mandrel have a centring hole. This allows it to be used "between the centres" on lathes to check the alignment of the tailstock.
This test mandrel made of 100Cr6 steel with MK2 morse taper is hardened and ground. The cylindrical measuring surface has a length of 210 mm and a diameter of 17 mm. Both ends of the test mandrel have a centring hole. This allows it to be used "between the centres" on lathes to check the alignment of the tailstock.
This test mandrel made of 100Cr6 steel with MK3 morse taper is hardened and ground. The cylindrical measuring surface has a length of 245 mm and a diameter of 23 mm. Both ends of the test mandrel have a centring hole. This allows it to be used "between the centres" on lathes to check the alignment of the tailstock.
Made from 100Cr6 steel, this test mandrel with MK4 morse taper is hardened and ground. The cylindrical measuring surface has a length of 270 mm and a diameter of 31 mm. Both ends of the test mandrel have a centring hole. This allows it to be used "between the centres" on lathes to check the alignment of the tailstock.
€29.00*
Content: 1 pcs
€35.00*
Content: 1 pcs
€39.00*
Content: 1 pcs
€45.00*
Content: 1 pcs
23 December 2024 19:22
Alles okay!
Alles okay!
18 June 2022 14:03
Super, zeer degelijk materiaal, prijs kwaliteit
Super, zeer degelijk materiaal, prijs kwaliteit
26 January 2022 00:00
Verwendung
Noch nicht benutzt,gedacht für Rundlaufprüfung der Spindel