10 x carbide indexable insert APKT1604PM
€63.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Indexable inserts are used in machining and are mounted on the appropriate turning tools or milling cutters. Depending on their intended use or the material to be machined, inserts come in various shapes and with special coatings. For example, there are special inserts for machining aluminium or non-ferrous metals. The inserts are standardised and can be identified by their respective standard designation. If an insert is worn out, it is simply replaced with a new one.
Technical data
| Areas of application: | Face milling, Heel milling |
|---|---|
| Clearance angle [°]: | 11 |
| Coating: | TiAlN |
| Cutting edge radius [mm]: | 0,8 |
| Standard designation: | APKT1604PM |
Carbide indexable insert with titanium-aluminium-nitrogen coating (TiAlN)
For machining hard materials, such as steel and stainless steel
High hot hardness and oxidation resistance
For higher cutting speeds
Description of the
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
Scope of delivery
- 10 x carbide indexable insert APKT1604PM
More about the brand and products from
Further information on our professional line
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
The advantages and properties of this polished insert:The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.. Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
The advantages and properties of this polished insert:The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent cutting of aluminium and non-ferrous metals such as brass, copper, bronze etc.. Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
€63.00*
Contents: 1 pcs
€67.50*
Contents: 1 pcs
€7.50*
Contents: 1 pcs
€7.00*
Contents: 1 pcs