10 x carbide indexable insert DCMT11T304-TiAlN
€45.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Indexable inserts are used in machining and are mounted on the turning tools or milling cutters intended for this purpose. Depending on the intended use or the material to be machined, inserts are available in various shapes and with special coatings. For example, there are special inserts for machining aluminium or non-ferrous metals. The inserts are standardised and can be identified by the respective standard designation. If a cutting insert is worn, it is simply replaced with a new insert.
Technical data
| Areas of application: | Chamfering, Facing, Internal boring, Longitudinal turning |
|---|---|
| Areas of application: | Facing |
| Areas of application: | Internal boring, Longitudinal turning |
| Areas of application: | Longitudinal turning |
| Clearance angle [°]: | 7 |
| Cutting edge radius [mm]: | 0,4 |
| Point angle [°]: | 55 |
| Standard designation: | DCMT11T304 |
| Surface: | TiAlN |
Carbide insert with titanium-aluminium-nitrogen coating (TiAlN)
For cutting hard materials such as steel, stainless steel and titanium alloys
High hot hardness and oxidation resistance
For higher cutting speeds
Cooling not absolutely necessary
Description of the
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
Scope of delivery
- 10 x carbide indexable insert DCMT11T304-TiAlN
More about the brand and products fromÂ
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This insert is made of sintered carbide. The high temperature resistance of carbide allows higher cutting speeds in contrast to HSS tools. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This insert is made of sintered carbide. The high temperature resistance of carbide allows higher cutting speeds in contrast to HSS tools. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
€45.00*
Content: 1 pcs
€45.00*
Content: 1 pcs
€40.50*
Content: 1 pcs
€5.00*
Content: 1 pcs
€4.50*
Content: 1 pcs
€5.00*
Content: 1 pcs
6 January 2025 20:28
TOP Platte zum Top Preis
Sehr gute Wendeschneidplatte, fĂ¼r meine AnsprĂ¼che mehr als ausreichend. Preis - Leistung ist absolut TOP
20 November 2024 13:47
Top
Top
5 February 2024 21:14
Preis Leistung perfekt đŸ‘Œ
Preis Leistung perfekt đŸ‘Œ
7 December 2022 22:47
qualitativ gute Ware
die Schneidplatten sind von guter Qualität, wir bestellen regelmĂ¤ĂŸig bei Paulimot und sind sehr zufrieden mit der Qualität und der schnellen Lieferung.
27 November 2022 08:43
Good product for the money
Good product for the money
25 September 2022 08:56
Immer wieder gut und zuverlässig.
Immer wieder gut und zuverlässig.
24 March 2022 12:42
Meiner Meinung nach fehlt es an Schärfe
Meiner Meinung nach fehlt es an Schärfe
Danke gerne wieder
5 December 2021 00:00
Guter Kauf
Einfache Suche im Ăœbersichtlichen online Shop und einfache Bestellung sowie zĂ¼gige Lieferung. Entspricht den Erwartungen und Anforderungen, qualitativ hochwertig