10 x carbide indexable insert JCL20-120A
€40.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Indexable inserts are used in machining and are mounted on the turning tools or milling cutters intended for this purpose. Depending on the intended use or the material to be machined, inserts are available in various shapes and with special coatings. For example, there are special inserts for machining aluminium or non-ferrous metals. The inserts are standardised and can be identified by the respective standard designation. If a cutting insert is worn, it is simply replaced with a new insert.
Technical data
| Areas of application: | Thread cutting |
|---|---|
| Clearance angle [°]: | 14 |
| Point angle [°]: | 60 |
| Standard designation: | JCL20-120A |
| Surface: | TiN |
Carbide insert TiN-coated for longer tool life
Universal application range
For machining soft materials such as aluminium
Also suitable for cutting harder materials such as steel
Description of the
This insert is made of sintered carbide. The high temperature resistance of carbide allows higher cutting speeds in contrast to HSS tools. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
Scope of delivery
- 10 x carbide indexable insert JCL20-120A
More about the brand and products from
This insert is made of sintered carbide. The high temperature resistance of carbide allows higher cutting speeds in contrast to HSS tools. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This insert is made of sintered carbide. The high temperature resistance of carbide allows higher cutting speeds in contrast to HSS tools. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
€40.50*
Content: 1 pcs
€45.00*
Content: 1 pcs
€45.00*
Content: 1 Piece
€4.50*
Content: 1 pcs
€5.00*
Content: 1 pcs
€5.00*
Content: 1 pcs
25 April 2022 11:18
sehr schnelle Lieferung
sehr schnelle Lieferung
3 March 2021 00:00
Zufriedener Kunde
Die Wendeschneidplatten haben gute Qualität, waren wie beschrieben. Schnelle lieferung, alles bestens, gerne mal wieder.
14 September 2020 00:00
Sehr gutes Preis-/Leistungsverhältnis
Gute Qualität zu einen fairen Preis
29 February 2020 00:00
alles in ordnung
soweit alles in bester ordnung gutes qualität.
7 June 2019 00:00
Dieser Artikel wurde Storniert
Dieser Artikel konnte von mir ohne probleme storniert werden,da ich mich bei den abmassen des artikels vertan hatte.
7 January 2019 00:00
Drehstahl-Set 2134
Ersatzaustausch Leichter wechsel
Top Wsre zum adäquaten Preis?
kaufe dieses Produkt immer wqieder