10 x carbide indexable insert SCMT09T304
€40.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Indexable inserts are used in machining and are mounted on the turning tools or milling cutters intended for this purpose. Depending on the intended use or the material to be machined, inserts are available in various shapes and with special coatings. For example, there are special inserts for machining aluminium or non-ferrous metals. The inserts are standardised and can be identified by the respective standard designation. If a cutting insert is worn, it is simply replaced with a new insert.
Technical data
| Areas of application: | Chamfering, Facing, Internal boring, Longitudinal turning |
|---|---|
| Clearance angle [°]: | 7 |
| Cutting edge radius [mm]: | 0,4 |
| Point angle [°]: | 90 |
| Standard designation: | SCMT09T304 |
| Surface: | TiN |
Carbide insert TiN-coated for longer tool life
Universal application range
For machining soft materials such as aluminium
Also suitable for cutting harder materials such as steel
Description of the
This insert is made of sintered carbide. The high temperature resistance of carbide allows higher cutting speeds in contrast to HSS tools. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
Scope of delivery
- 10 x carbide indexable insert SCMT09T304
More about the brand and products from
This insert is made of sintered carbide. The high temperature resistance of carbide allows higher cutting speeds in contrast to HSS tools. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This insert is made of sintered carbide. The high temperature resistance of carbide allows higher cutting speeds in contrast to HSS tools. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
€40.50*
Content: 1 pcs
€45.00*
Content: 1 pcs
€45.00*
Content: 1 pcs
€5.00*
Content: 1 pcs
€4.50*
Content: 1 pcs
€5.00*
Content: 1 pcs
12 March 2025 12:24
Erfüllt voll und ganz meiner Erwartung.
Erfüllt voll und ganz meiner Erwartung.
28 February 2025 19:01
Passen zum Halter
Preis -Leistung ist gut. Die Platten arbeiten wie Sie sollen. Vielleicht etwas abplatzempfindlicher als andere aber trotzdem gut zu händeln.
13 February 2024 07:52
Gut und günstig. Machen was sie sollen.
Gut und günstig. Machen was sie sollen. Bin sehr zufrieden mit den Drehmeißeln.
5 January 2024 14:18
Qualitat gut, Lieferung pünktlich.lles OK.
Qualitat gut, Lieferung pünktlich.lles OK.
23 August 2023 20:38
Im oberen Hobbybereich top
Im oberen Hobbybereich top
9 December 2022 14:18
Die Schneidplatten sind von hoher Qualität. Über
Die Schneidplatten sind von hoher Qualität. Über die Standzeit kann ich keine Aussage machen, da sie noch nicht lange im Einsatz sind. Der Support und Versand von paulimot ist schnell und zuverlässig. Meine Anfragen wurden jeweils innerhalb weniger Stunden beantwortet. Ich kann die Firma empfehlen.
Qualität, Verpackung u. Versand alles OK
27 September 2022 13:34
Bin sehr zufrieden damit
Bin sehr zufrieden damit
25 April 2022 11:18
sehr schnelle Lieferung
sehr schnelle Lieferung
5 April 2022 09:05
Alles super Sehr gern wieder
Alles super Sehr gern wieder