10 x carbide indexable insert TCMT090204-TiAlN
€45.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Indexable inserts are used in machining and are mounted on the turning tools or milling cutters intended for this purpose. Depending on the intended use or the material to be machined, inserts are available in various shapes and with special coatings. For example, there are special inserts for machining aluminium or non-ferrous metals. The inserts are standardised and can be identified by the respective standard designation. If a cutting insert is worn, it is simply replaced with a new insert.
Technical data
| Areas of application: | Chamfering, Facing, Internal boring, Longitudinal turning |
|---|---|
| Areas of application: | Facing |
| Areas of application: | Internal boring, Longitudinal turning |
| Areas of application: | Longitudinal turning |
| Clearance angle [°]: | 7 |
| Cutting edge radius [mm]: | 0,4 |
| Point angle [°]: | 60 |
| Standard designation: | TCMT090204 |
| Surface: | TiAlN |
Carbide insert with titanium-aluminium-nitrogen coating (TiAlN)
For cutting hard materials such as steel, stainless steel and titanium alloys
High hot hardness and oxidation resistance
For higher cutting speeds
Cooling not absolutely necessary
Description of the
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
Scope of delivery
- 10 x carbide indexable insert TCMT090204-TiAlN
More about the brand and products from
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
€45.00*
Content: 1 pcs
€40.50*
Content: 1 pcs
€45.00*
Content: 1 pcs
€5.00*
Content: 1 pcs
€4.50*
Content: 1 pcs
€5.00*
Content: 1 pcs
21 February 2023 09:18
Sehr rasche Lieferung, Qualität und Preis/Leistung sind
Sehr rasche Lieferung, Qualität und Preis/Leistung sind gut.
19 September 2022 08:53
Hobbydreher
Paulimot wie immer schnell und zuverlässig. Guter Service!
27 May 2022 08:41
Material und Lieferung
Bei allen Bestellungen bin ich sehr zufrieden mit dem Material, erst klassische Teile und schnelle Lieferung.
23 March 2022 06:16
Nach ausführlicher und potenter Beratung schnelle
Nach ausführlicher und potenter Beratung schnelle Lieferung und gute Qualität der Schneidplatten
Hat wie immer super geklappt, Produktqualität wie gewohnt hervorragend. Vielen Dank
5 January 2021 00:00
Sehr gut
Gut
5 October 2020 00:00
Alles super sehr zufrieden
Alles gut gelaufen schneller Versand passt alles
29 September 2020 00:00
Super Ware
Gute Qualität, schnelle Lieferung, guter Preis!
29 June 2020 00:00
Gute Qualität, prompte Lieferung.
Gute Qualität, prompte Lieferung.