2-axis machine vice 75 mm jaw width 360° rotatable
€189.00*
% €195.00* (3.08% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
Less than 10 pieces available (online and in specialist shops)
Description of the
Height of jaws: 35 mm
Max. Clamping range: 75 mm
Total height: 130 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The hand crank is of course included in the scope of delivery.
More about the brand and products from
Height of jaws: 35 mm
Max. Clamping range: 75 mm
Total height: 130 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The hand crank is of course included in the scope of delivery.
Height of jaws: 25 mm
Max. Clamping range: 50 mm
Total height: 75 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
With longitudinal groove on the underside of the base plate for alignment on the machine table.
The hand crank is of course included in the scope of delivery.
Height of jaws: 25 mm
Max. Clamping range: 55 mm
Total height: 88 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
With longitudinal groove on the underside of the base plate for alignment on the machine table.
The hand crank is of course included in the scope of delivery.
Height of jaws: 25 mm
Max. Clamping range: 50 mm
Total height: 95 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The hand crank is of course included in the scope of delivery.
Jaw height: 24 mm
Max. Clamping range: 53 mm
Total height: 120 mmHeight to support: 95 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°, the horizontal adjustment range is +/- 45°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The longitudinal groove on the underside of the base plate enables alignment on the machine table.
The guides of the adjustable axes and the base plate are ground.
The removable hand crank is of course included in the scope of delivery.
This 360° rotating machine vice is particularly characterised by its quick-release mechanism. Vices with this technology are particularly suitable for series processing of workpieces of the same dimensions. The clamping range is preset via the spindle. The workpiece itself is clamped using the quick-clamping lever. Actuating the lever opens or closes the jaws by approx. 2 mm, enabling the workpieces to be changed quickly. The machining angle of +/- 90° can be set and read off using the angle scale on the turntable. The desired angle position is fixed using two nuts. The vice can be attached to a machine table using the slotted holes on the side.
The swivelling function of this machine vice makes it possible to process surfaces at a specific angle in relation to the clamping surface. The machining angle can be set and read off from 0 to 90° using the angle scale on the side. The desired angle position is fixed using a tommy screw. The vice has an adjustable stop screw for the zero position. The vice can be attached to a machine table using the four slotted holes.
Height of jaws: 35 mm
Max. Clamping range: 75 mm
Total height: 100 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
The hand crank is of course included in the scope of delivery.
Height of jaws: 33.5 mm
Max. Clamping range: 77 mm
Total height: 170 mmHeight to support: 130 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°, the horizontal adjustment range is +/- 45°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The longitudinal groove on the underside of the base plate enables alignment on the machine table.
The guides of the adjustable axes and the base plate are ground.
The removable hand crank is of course included in the scope of delivery.
Jaw height: 37 mm
Max. Clamping range: 102 mm
Total height: 195 mmHeight to support: 154 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°, the horizontal adjustment range is +/- 45°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
The longitudinal groove on the underside of the base plate enables alignment on the machine table.
The guides of the adjustable axes and the base plate are ground.
The removable hand crank is of course included in the scope of delivery.
The swivelling function of this machine vice makes it possible to process surfaces at a specific angle in relation to the clamping surface. The machining angle can be set and read off from 0 to 90° using the angle scale on the side. The desired angle position is fixed using a tommy screw. The vice has an adjustable stop screw for the zero position. The vice can be attached to a machine table using the four slotted holes.
Height of jaws: 40 mm
Max. Clamping range: 104.5 mm
Total height: 125 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The guides on the vice can be adjusted using pressure bars.
With longitudinal groove on the underside of the base plate for alignment on the machine table.
The hand crank is of course included in the scope of delivery.
Height of jaws: 37 mm
Max. Clamping range: 102 mm
Total height: 147 mmHeight to support: 101 mm
The vice can be rotated 360° on the base plate, a scale is attached all the way round (1 graduation mark = 1°).
The vertical adjustment range is up to 90°. A scale is also provided here.
The guides on the vice can be adjusted using pressure bars.
With longitudinal groove on the underside of the base plate for alignment on the machine table.
The hand crank is of course included in the scope of delivery.
€189.00*
Content: 1 pcs
€96.00*
Content: 1 pcs
€109.00*
Content: 1 pcs
€106.00*
Content: 1 pcs
€140.00*
Content: 1 pcs
€178.00*
Content: 1 pcs
€117.00*
Content: 1 pcs
€160.00*
Content: 1 pcs
€207.00*
Content: 1 pcs
€301.00*
Content: 1 pcs
€147.00*
Content: 1 pcs
€219.00*
Content: 1 pcs
€275.00*
Content: 1 pcs
8 January 2021 00:00
gut
Gutes Preis Leistungverhältniss Schraubstock ist zum weiterempfehlen
1 May 2019 00:00
Sehr gute Preis-Leistungsverhältniss
Der Schraubstock ist sauber verarbeitet und entspricht voll meine Erwartungen.
3 December 2016 00:00
Eine nützliche Erweiterung für Bohr- und Fräsmaschinen
Der Schraubstock mit 75mm Backenbreite kommt auf meiner Bohr-/Fräsmaschine Paulimot F205-V zum Einsatz. Dort bearbeite ich vor allem Holzteile. Ich brauche ihn für schräg eingebrachte Bohrungen an relativ kleinen Teilen. Dafür ist er sehr gut geeignet. Die 75mm-Backen nehmen die üblichen 100mm-Backen-Schoner von Werkbankschraubstöcken (hier mit Gummiflächen) gut auf. Magnetische Haftung funktioniert sehr gut. Man muss sich aber im Klaren sein, dass damit die Spannweite von nur 75mm noch weiter zurückgeht. Der Anstellwinkel lässt sich durch leichtes "Klopfen" problemlos einstellen. Nur das 4-Kantloch in der Handkurbel ist etwas "ausgefranst" (Gusslunker?). Damit hält sie nicht fest. Es lässt sich aber problemlos drehen und dann lege ich sie sowieso zu den anderen Spannschlüsseln.
18 November 2016 00:00
Der Maschinen Schraubstock kam wie üblich pünktlich, die Ware war in Ordnung wie immer. Der Schraubstock entspricht dem Preis Leistungsverhältnis und ist weiter zu empfehlen.
12 November 2014 00:00
Echt Spitzenmässiges teil
1 April 2014 00:00
Für Modellbauer sehr gut geeignet
Gute Verarbeitung, praktische Verstellmöglichkeiten. Backen perfekt parallel. Metrische Gewinde für Klemmungen, zum Teil seltsame Schlüsselweiten (16mm z.B.). Kann man aber gegen Standardteile tauschen.
10 February 2014 00:00
Massives und tolles Teil
30 September 2013 00:00
Spitzenqualität
Saubere und gute Verarbeitung. Skalen sind fien und gut abzulesen.