4-axis magnetic tape measuring system set with LCD touchscreen for PM2700
€597.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Magnetic tape measuring systems are mainly used on machine tools, such as lathes or milling machines. In addition to the versatile functions of a measuring system, it is used to display the actual position of a workpiece or tool in a coordinate system.
Technical data
Frequency [Hz]: | 50 |
---|---|
Length of magnetic tape [mm]: | 972 |
Length of profile rail incl. magnetic tape [mm]: | 1.000 |
Profile rail height incl. magnetic tape [mm]: | 15 |
Sensor cable length [m]: | 3 |
Voltage [V]: | 230 |
WEEE reg. no.: | EN 95902713 |
LCD touchscreen with 18 cm / 7 inch display incl. magnetic stand
Incl. one magnetic tape (1,000 mm long), already mounted in profile rail, incl. 3 sensors for magnetic tape
Turning / milling or grinding mode can be set
Switchable mm / inch
Very extensive functions
Description of the
This position measuring system retrofit kit with LCD touchscreen is designed for the travel ranges of the PM2700 lathe or similarly dimensioned machines and is intended for retrofitting.
The set consists of the SDS 200S position indicator, the magnetic stand for the position indicator, three magnetic tape sensors, four end caps for magnetic tape profile rails and a magnetic tape including profile rail with a length of 1,000 mm.
The magnetic tape is already mounted on the profile rail and fitted with a stainless steel cover strip. It can be shortened individually so that its length can be adapted to the respective travel path.
The 1,000 mm long profile rail with magnetic tape included in this set can be shortened so that it can be used to produce three measuring rails for top, face and bed slides.
The procedure for shortening the magnetic strips is described in detail in our guide "Measuring systems for machines" under "Tips & tricks for mounting" and in our explanatory video.
Link to the guide: Measuring systems for machines
Link to the video: Installing a customised measuring system
The distance measuring system is characterised by very extensive functions and display options. Selected functions are shown graphically on the display for better understanding. The position display offers the option of choosing between turning, milling or grinding mode. The languages available are German, English, Spanish, French and Chinese.
The following functions are available in turning mode:
- Taper turning
- Tool compensation
- The traverse path in the X-axis can be displayed either in diameter or radius.
- It is possible to display Z and Z0 combined, i.e. the travel of the bed slide and the travel of the top slide are displayed as a total.
The following functions are available in the milling operating mode:
- Inclined contour / surface: Milling of phases or diagonal surfaces
- Setting any number of holes at an even distance on a straight line (SHL function)
- Milling a radius or circular arc
- Representation of a bolt hole circle for evenly spaced holes on a circular arc
- Determination of the centre point between two points
The values can be displayed in mm or inches in all operating modes. It is possible to change the sign when displaying the individual axes. A standby mode can be activated on the position display. The display brightness, date, time and acoustic signals can be set. A calculator function with memory is also available.
Scope of delivery
- 1 x SDS 200S position display with touchscreen
- 1 x magnetic stand for position indicator
- 1 x profile rail incl. magnetic tape, length 1,000 mm
- 3 x magnetic tape sensor, cable length 3 m
- 4 x End cap for magnetic tape profile rail
More about the brand and products fromÂ



This position measuring system retrofit kit with LCD touchscreen is designed for the travel ranges of the PM2700 lathe or similarly dimensioned machines and is intended for retrofitting.
The set consists of the SDS 200S position indicator, the magnetic stand for the position indicator, three magnetic tape sensors, four end caps for magnetic tape profile rails and a magnetic tape including profile rail with a length of 1,000 mm.
The magnetic tape is already mounted on the profile rail and fitted with a stainless steel cover strip. It can be shortened individually so that its length can be adapted to the respective travel path.
The 1,000 mm long profile rail with magnetic tape included in this set can be shortened so that it can be used to produce three measuring rails for top, face and bed slides.
The procedure for shortening the magnetic strips is described in detail in our guide "Measuring systems for machines" under "Tips & tricks for mounting" and in our explanatory video.
Link to the guide: Measuring systems for machines
Link to the video: Installing a customised measuring system
The distance measuring system is characterised by very extensive functions and display options. Selected functions are shown graphically on the display for better understanding. The position display offers the option of choosing between turning, milling or grinding mode. The languages available are German, English, Spanish, French and Chinese.
The following functions are available in turning mode:
- Taper turning
- Tool compensation
- The traverse path in the X-axis can be displayed either in diameter or radius.
- It is possible to display Z and Z0 combined, i.e. the travel of the bed slide and the travel of the top slide are displayed as a total.
The following functions are available in the milling operating mode:
- Inclined contour / surface: Milling of phases or diagonal surfaces
- Setting any number of holes at an even distance on a straight line (SHL function)
- Milling a radius or circular arc
- Representation of a bolt hole circle for evenly spaced holes on a circular arc
- Determination of the centre point between two points
The values can be displayed in mm or inches in all operating modes. It is possible to change the sign when displaying the individual axes. A standby mode can be activated on the position display. The display brightness, date, time and acoustic signals can be set. A calculator function with memory is also available.
This position measuring system retrofit kit with LCD screen is designed for the travel ranges of the PM2700 lathe or similarly dimensioned machines and is intended for retrofitting by the user.
The set consists of the SDS 200 position indicator, the holder for the position indicator, three magnetic tape sensors, four end caps for magnetic tape profile rails and a magnetic tape including profile rail with a length of 1,000 mm.
The magnetic strip is already mounted on the profile rail and fitted with a stainless steel cover strip. It can be shortened individually so that its length can be adapted to the respective travel path.
The 1,000 mm long profile rail with magnetic tape included in this set can be shortened so that it can be used to produce three measuring rails for top, face and bed slides.
The procedure for shortening the magnetic strips is described in detail in our guide "Measuring systems for machines" under "Tips & tricks for mounting" and in our explanatory video.
Link to the guide: Measuring systems for machines
Link to the video: Installing a customised measuring system
The distance measuring system is characterised by very extensive functions and display options. Selected functions are shown graphically on the display for better understanding. The position display offers the option of choosing between turning, milling or grinding mode. The languages available are German, English, Spanish, French and Chinese.
The following functions are available in turning mode:
- Taper turning
- Tool compensation
- The traverse path in the X-axis can be displayed either in diameter or radius.
- It is possible to display Z and Z0 combined, i.e. the travel of the bed slide and the travel of the top slide are displayed as a total.
The following functions are available in the milling operating mode:
- Inclined contour / surface: Milling of phases or diagonal surfaces
- Setting any number of holes at an even distance on a straight line (SHL function)
- Milling a radius or circular arc
- Representation of a bolt hole circle for evenly spaced holes on a circular arc
- Determination of the centre point between two points
The values can be displayed in mm or inches in all operating modes. It is possible to change the sign when displaying the individual axes. A standby mode can be activated on the position display. The display brightness, date, time and acoustic signals can be set. A calculator function with memory is also available.
€597.00*
Content: 1 pcs
€699.50*
Content: 1 pcs