Skip to main content

4-axis magnetic tape measuring system set with LCD touchscreen for PM4000

Intended use

Magnetic tape measuring systems are mainly used on machine tools, such as lathes or milling machines. In addition to the versatile functions of a measuring system, it is used to display the actual position of a workpiece or tool in a coordinate system.

Technical data

Frequency [Hz]: 50
Length of magnetic tape [mm]: 472 / 772
Length of profile rail incl. magnetic tape [mm]: 500 / 800
Profile rail height incl. magnetic tape [mm]: 15 / 15
Sensor cable length [m]: 3
Voltage [V]: 230
WEEE reg. no.: EN 95902713

LCD touchscreen with 18 cm / 7 inch display incl. magnetic stand

Incl. 2 magnetic tapes (500 and 800 mm long), already mounted in profile rail, incl. 3 sensors for magnetic tape

Turning / milling or grinding mode can be set

Switchable mm / inch

Very extensive functions

Description of the

This position measuring system retrofit kit with LCD touchscreen is designed for the travel ranges of the PM4000 lathe or similarly dimensioned machines and is intended for retrofitting.

The set consists of the SDS 200S position indicator, the magnetic stand for the position indicator, three magnetic tape sensors, two end caps for magnetic tape profile rails and two magnetic tapes including profile rail in lengths of 500 mm and 800 mm.

The magnetic strips are already mounted on the profile rails and fitted with a stainless steel cover strip. They can be shortened individually so that their length can be adapted to the respective travel path.

The 500 mm long profile rail with magnetic tape included in this set can be shortened so that it can be used to produce two measuring rails for top and face slides. The 800 mm measuring bar can be mounted on the machine bed of the PM4000 without being shortened.

The procedure for shortening the magnetic strips is described in detail in our guide "Measuring systems for machines" under "Tips & tricks for mounting" and in our explanatory video.
Link to the guide: Measuring systems for machines
Link to the video: Installing a customised measuring system

The distance measuring system is characterised by very extensive functions and display options. Selected functions are shown graphically on the display for better understanding. The position display offers the option of choosing between turning, milling or grinding mode. The languages available are German, English, Spanish, French and Chinese.

The following functions are available in turning mode:

  • Taper turning
  • Tool compensation
  • The traverse path in the X-axis can be displayed either in diameter or radius.
  • It is possible to display Z and Z0 combined, i.e. the travel of the bed slide and the travel of the top slide are displayed as a total.

The following functions are available in the milling operating mode:

  • Inclined contour / surface: Milling of phases or diagonal surfaces
  • Setting any number of holes at an even distance on a straight line (SHL function)
  • Milling a radius or circular arc
  • Representation of a bolt hole circle for evenly spaced holes on a circular arc
  • Determination of the centre point between two points

The values can be displayed in mm or inches in all operating modes. It is possible to change the sign when displaying the individual axes. A standby mode can be activated on the position display. The display brightness, date, time and acoustic signals can be set. A calculator function with memory is also available.

Scope of delivery

  • 1 x SDS 200S position display with touchscreen
  • 1 x magnetic stand for position indicator
  • 1 x profile rail incl. magnetic tape, length 500 mm
  • 1 x profile rail incl. magnetic tape, length 800 mm
  • 3 x magnetic tape sensor, cable length 3 m
  • 2 x end cap for magnetic tape profile rail

More about the brand and products from 

Product comparison
Article image
Set: 4-axis measuring system with LCD touchscreen, magnetic tapes, sensors, screws and brackets. Display with texts such as "X,Z,Z0" and "Lathe".
Magnetic tape measuring system set: display, magnetic tapes, brackets, screws. LCD screen with keypad in the centre. Magnetic tapes 500/800mm top.
Product title
4-axis magnetic tape measuring system set with LCD touchscreen for PM4000
4-axis magnetic tape measuring system set with LCD screen for PM4000
Valuation
Description of the

This position measuring system retrofit kit with LCD touchscreen is designed for the travel ranges of the PM4000 lathe or similarly dimensioned machines and is intended for retrofitting.

The set consists of the SDS 200S position indicator, the magnetic stand for the position indicator, three magnetic tape sensors, two end caps for magnetic tape profile rails and two magnetic tapes including profile rail in lengths of 500 mm and 800 mm.

The magnetic strips are already mounted on the profile rails and fitted with a stainless steel cover strip. They can be shortened individually so that their length can be adapted to the respective travel path.

The 500 mm long profile rail with magnetic tape included in this set can be shortened so that it can be used to produce two measuring rails for top and face slides. The 800 mm measuring bar can be mounted on the machine bed of the PM4000 without being shortened.

The procedure for shortening the magnetic strips is described in detail in our guide "Measuring systems for machines" under "Tips & tricks for mounting" and in our explanatory video.
Link to the guide: Measuring systems for machines
Link to the video: Installing a customised measuring system

The distance measuring system is characterised by very extensive functions and display options. Selected functions are shown graphically on the display for better understanding. The position display offers the option of choosing between turning, milling or grinding mode. The languages available are German, English, Spanish, French and Chinese.

The following functions are available in turning mode:

  • Taper turning
  • Tool compensation
  • The traverse path in the X-axis can be displayed either in diameter or radius.
  • It is possible to display Z and Z0 combined, i.e. the travel of the bed slide and the travel of the top slide are displayed as a total.

The following functions are available in the milling operating mode:

  • Inclined contour / surface: Milling of phases or diagonal surfaces
  • Setting any number of holes at an even distance on a straight line (SHL function)
  • Milling a radius or circular arc
  • Representation of a bolt hole circle for evenly spaced holes on a circular arc
  • Determination of the centre point between two points

The values can be displayed in mm or inches in all operating modes. It is possible to change the sign when displaying the individual axes. A standby mode can be activated on the position display. The display brightness, date, time and acoustic signals can be set. A calculator function with memory is also available.

This position measuring system retrofit kit with LCD screen is designed for the travel ranges of the PM4000 lathe or similarly dimensioned machines and is intended for retrofitting.

The set consists of the SDS 200 position display, the holder for the position display, three magnetic tape sensors, two end caps for magnetic tape profile rails and two magnetic tapes including profile rail in lengths of 500 mm and 800 mm.

The magnetic strips are already mounted on the profile rails and fitted with a stainless steel cover strip. They can be shortened individually so that their length can be adapted to the respective travel path.

The 500 mm long profile rail with magnetic tape included in this set can be shortened so that it can be used to produce two measuring rails for top and face slides. The 800 mm measuring bar can be mounted on the machine bed of the PM4000 without being shortened.

The procedure for shortening the magnetic strips is described in detail in our guide "Measuring systems for machines" under "Tips & tricks for mounting" and in our explanatory video.
Link to the guide: Measuring systems for machines
Link to the video: Installing a customised measuring system

The distance measuring system is characterised by very extensive functions and display options. Selected functions are shown graphically on the display for better understanding. The position display offers the option of choosing between turning, milling or grinding mode. The languages available are German, English, Spanish, French and Chinese.

The following functions are available in turning mode:

  • Taper turning
  • Tool compensation
  • The traverse path in the X-axis can be displayed either in diameter or radius.
  • It is possible to display Z and Z0 combined, i.e. the travel of the bed slide and the travel of the top slide are displayed as a total.

The following functions are available in the milling operating mode:

  • Inclined contour / surface: Milling of phases or diagonal surfaces
  • Setting any number of holes at an even distance on a straight line (SHL function)
  • Milling a radius or circular arc
  • Representation of a bolt hole circle for evenly spaced holes on a circular arc
  • Determination of the centre point between two points

The values can be displayed in mm or inches in all operating modes. It is possible to change the sign when displaying the individual axes. A standby mode can be activated on the position display. The display brightness, date, time and acoustic signals can be set. A calculator function with memory is also available.

Price

€647.00*

Content: 1 pcs

€749.50*

Content: 1 pcs

Frequency [Hz]
50
50
Length of magnetic tape [mm]
472 / 772
472 / 772
Length of profile rail incl. magnetic tape [mm]
500 / 800
500 / 800
Profile rail height incl. magnetic tape [mm]
15 / 15
15 / 15
Sensor cable length [m]
3
3
Voltage [V]
230
230
WEEE reg. no.
EN 95902713
EN 95902713

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.

Excellent

Very good

Good

Acceptable

Unsatisfactory

This site is protected by reCAPTCHA and the Privacy Policy and Terms of Use apply.

Information on the manufacturer (information obligations under the GPSR Product Safety Regulation)
Paulitschek Maschinen- und Warenvertriebsgesellschaft mbH
ZeppelinstraĂŸe 3
89231 Neu-Ulm, Deutschland
+49 731 23232
support@paulimot.de