Auger bit Ø 10 mm, length 230 mm, shape Lewis

This 10 mm diameter snake drill bit, measuring 230 mm in length, is designed for drilling in wood and is suitable for beams, square timber, solid wood, laminated timber and wood-based materials. The 230 mm version offers a manageable tool length for use in workshops, assembly, interior fitting and timber construction, where clean drill holes, precise positioning and reliable chip removal are required. The drill bit is made from hardened carbon tool steel. This material provides a stable foundation for wood drilling tools and supports a durable cutting geometry during regular use. The hardening process increases the wear resistance of the cutting edges and contributes to reliable drilling performance in typical wood-based materials. The centring tip enables precise positioning on the workpiece. The feed thread at the tip draws the drill bit into the wood in a controlled manner and reduces the required pressure. This promotes a smooth drilling process. To ensure clean hole edges, the snake drill bit is fitted with a pre-cutter. This pre-cuts the wood fibres at the edge of the hole and helps to reduce tear-outs. At the same time, the Lewis spiral ensures excellent chip evacuation and reliably transports the chips out of the drill hole. The taper toward the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole and to ensure smooth cutting through the material.

This 12 mm diameter snake drill bit, measuring 230 mm in length, is designed for drilling in wood and is suitable for beams, square timber, solid wood, laminated timber and wood-based materials. The 230 mm version offers a manageable tool length for use in workshops, assembly, interior fitting and timber construction, where clean drill holes, precise positioning and reliable chip removal are required. The drill bit is made from hardened carbon tool steel. This material provides a stable foundation for wood drilling tools and supports a durable cutting geometry during regular use. The hardening process increases the wear resistance of the cutting edges and contributes to reliable drilling performance in typical wood-based materials. The centring tip enables precise positioning on the workpiece. The feed thread at the tip draws the drill bit into the wood in a controlled manner and reduces the required pressure. This promotes a smooth drilling process. To ensure clean hole edges, the snake drill bit is fitted with a pre-cutter. This pre-cuts the wood fibres at the edge of the hole and helps to reduce tear-outs. At the same time, the Lewis spiral ensures excellent chip evacuation and reliably transports the chips out of the drill hole. The taper toward the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole and to ensure smooth cutting through the material.

This Ø 13 mm snake drill bit, 230 mm in length, is designed for drilling in wood and is suitable for beams, square-edged timber, solid wood, laminated timber and wood-based materials. The 230 mm version offers a manageable tool length for use in workshops, assembly work, interior fitting and timber construction, where clean drill holes, precise positioning and reliable chip removal are required. The drill bit is made from hardened carbon tool steel. This material provides a stable foundation for wood drilling tools and supports a durable cutting geometry during regular use. The hardening process increases the wear resistance of the cutting edges and contributes to reliable drilling performance in typical wood-based materials. The centring tip enables precise positioning on the workpiece. The feed thread at the tip draws the drill bit into the wood in a controlled manner and reduces the required pressure. This promotes a smooth drilling process. To ensure clean hole edges, the snake drill bit is fitted with a pre-cutter. This pre-cuts the wood fibres at the edge of the hole and helps to reduce tear-outs. At the same time, the Lewis spiral ensures excellent chip evacuation and reliably transports the chips out of the drill hole. The taper toward the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole and to ensure smooth cutting through the material.

Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

This 16 mm diameter snake drill bit, measuring 230 mm in length, is designed for drilling in wood and is suitable for beams, square-edged timber, solid wood, laminated timber and wood-based materials. The 230 mm version offers a manageable tool length for use in workshops, assembly, interior fitting and timber construction, where clean drill holes, precise positioning and reliable chip removal are required. The drill bit is made from hardened carbon tool steel. This material provides a stable foundation for wood drilling tools and supports a durable cutting geometry during regular use. The hardening process increases the wear resistance of the cutting edges and contributes to reliable drilling performance in typical wood-based materials. The centring tip enables precise positioning on the workpiece. The feed thread at the tip draws the drill bit into the wood in a controlled manner and reduces the required pressure. This promotes a smooth drilling process. To ensure clean hole edges, the snake drill bit is fitted with a pre-cutter. This pre-cuts the wood fibres at the edge of the hole and helps to reduce tear-outs. At the same time, the Lewis spiral ensures excellent chip evacuation and reliably transports the chips out of the drill hole. The taper toward the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole and to ensure smooth cutting through the material.

This Ø 18 mm snake drill bit, 230 mm in length, is designed for drilling in wood and is suitable for beams, square-edged timber, solid wood, laminated timber and wood-based materials. The 230 mm version offers a manageable tool length for use in workshops, assembly, interior fitting and timber construction, where clean drill holes, precise positioning and reliable chip removal are required. The drill bit is made from hardened carbon tool steel. This material provides a stable foundation for wood drilling tools and supports a durable cutting geometry during regular use. The hardening process increases the wear resistance of the cutting edges and contributes to reliable drilling performance in typical wood-based materials. The centring tip enables precise positioning on the workpiece. The feed thread at the tip draws the drill bit into the wood in a controlled manner and reduces the required pressure. This promotes a smooth drilling process. To ensure clean hole edges, the snake drill bit is fitted with a pre-cutter. This pre-cuts the wood fibres at the edge of the hole and helps to reduce tear-outs. At the same time, the Lewis spiral ensures excellent chip evacuation and reliably transports the chips out of the drill hole. The taper toward the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole and to ensure smooth cutting through the material.

This 19 mm diameter snake drill bit, 230 mm in length, is designed for clean drilling in wood, beams, square timber, solid wood, laminated timber and wood-based materials. The 230 mm length makes it easy to manoeuvre, ideal for use in workshops, assembly work, interior fitting and timber construction. The drill bit is made from hardened carbon tool steel, a robust tool steel for wood drilling tools with a stable cutting edge geometry. The hardening process makes the cutting edges more resistant to wear, which contributes to reliable drilling performance during repeated drilling operations. The centring tip makes it easier to position the drill accurately on the workpiece. The feed thread at the tip draws the drill bit into the material in a controlled manner and reduces the pressure required. The pilot cutter pre-cuts the wood fibres at the edge of the hole, helping to ensure clean hole edges. At the same time, the Lewis spiral ensures reliable chip evacuation and carries the chips out of the drill hole. The taper toward the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole, ensuring it runs smoothly through the material.

This Ø 20 mm snake drill bit, 230 mm in length, is suitable for drilling into beams, square-edged timber, solid wood, laminated timber and wood-based materials. The Lewis design combines a pronounced spiral with a centring tip, feed thread and pilot cutter, thereby ensuring clean holes and reliable chip removal. The drill bit is made from hardened carbon tool steel. The hardened tool steel ensures a durable cutting edge and is designed to meet the demands of typical wood drilling applications. The centring tip allows for precise positioning of the drill bit, whilst the feed thread pulls the drill bit into the wood in a controlled manner and reduces the required feed pressure. The pilot cutter pre-cuts the wood fibres at the edge of the borehole and helps to ensure clean hole edges. The spiral flutes carry the chips out of the borehole and ensure smooth operation. The taper towards the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the borehole.

This 22 mm diameter snake drill bit, 230 mm in length, is designed for drilling into wood in workshops, during assembly, for interior fitting and in timber construction. It can be used in beams, square-edged timber, solid wood, laminated timber and wood-based materials. The tool is made from hardened carbon tool steel, which ensures a robust and wear-resistant cutting edge. The hardening process helps to ensure that the cutting edges perform reliably with regular use and enable clean drilling. The centring tip helps to position the drill bit accurately. The feed thread reduces the required pressure by drawing the drill bit into the wood in a controlled manner. To ensure clean hole edges, the twist drill is fitted with a pre-cutter that pre-cuts the wood fibres at the edge of the hole. The Lewis spiral ensures that chips are removed from the drill hole. The taper towards the shank, ranging from 1:50 to 1:100, is designed to prevent the drill from jamming in the hole and to ensure smooth cutting through the material.

Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

This Ø 25 mm snake drill bit, 230 mm in length, is designed for drilling in wood and is suitable for beams, square-edged timber, solid wood, laminated timber and wood-based materials. The 230 mm version offers a manageable tool length for use in workshops, assembly, interior fitting and timber construction, where clean drill holes, precise positioning and reliable chip removal are required. The drill bit is made from hardened carbon tool steel. This material provides a stable foundation for wood drilling tools and supports a durable cutting geometry during regular use. The hardening process increases the wear resistance of the cutting edges and contributes to reliable drilling performance in typical wood-based materials. The centring tip enables precise positioning on the workpiece. The feed thread at the tip draws the drill bit into the wood in a controlled manner and reduces the required pressure. This promotes a smooth drilling process. To ensure clean hole edges, the snake drill bit is fitted with a pre-cutter. This pre-cuts the wood fibres at the edge of the hole and helps to reduce tear-outs. At the same time, the Lewis spiral ensures excellent chip evacuation and reliably transports the chips out of the drill hole. The taper toward the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole and to ensure smooth cutting through the material.

This Ø 26 mm snake drill bit, 230 mm in length, is designed for clean drilling in wood, beams, square timber, solid wood, laminated timber and wood-based materials. The 230 mm length ensures easy handling for applications in workshops, assembly, interior fitting and timber construction. The drill bit is made from hardened carbon tool steel, a robust tool steel for wood drilling tools with a stable cutting edge geometry. The hardening process makes the cutting edges more resistant to wear, which contributes to reliable drilling performance during repeated drilling operations. The centring tip makes it easier to position the drill accurately on the workpiece. The feed thread at the tip draws the drill bit into the material in a controlled manner and reduces the pressure required. The pilot cutter pre-cuts the wood fibres at the edge of the hole and helps to ensure clean hole edges. At the same time, the Lewis spiral ensures reliable chip evacuation and carries the chips out of the drill hole. The taper toward the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole, ensuring it runs smoothly through the material.

This Ø 28 mm snake drill bit, 230 mm in length, is suitable for drilling into beams, square-edged timber, solid wood, laminated timber and wood-based materials. The Lewis design combines a pronounced spiral with a centring tip, feed threads and a pilot cutter, thereby ensuring clean holes and reliable chip removal. The drill bit is made from hardened carbon tool steel. The hardened tool steel ensures a durable cutting edge and is designed to meet the demands of typical wood drilling applications. The centring tip allows for precise positioning of the drill bit, whilst the feed thread pulls the drill bit into the wood in a controlled manner and reduces the required feed pressure. The pilot cutter pre-cuts the wood fibres at the edge of the borehole and helps to ensure clean hole edges. The spiral flutes carry the chips out of the borehole and ensure smooth operation. The taper towards the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the borehole.

This Ø 30 mm snake drill bit, 230 mm in length, is designed for drilling into wood in workshops, during assembly, for interior fitting and in timber construction. It can be used in beams, square-edged timber, solid wood, laminated timber and wood-based materials. The tool is made from hardened carbon tool steel, which ensures a robust and wear-resistant cutting edge. The hardening process helps to ensure that the cutting edges perform reliably with regular use and enable clean drilling. The centring tip helps to position the drill bit accurately. The feed thread reduces the required pressure by pulling the drill bit into the wood in a controlled manner. To ensure clean hole edges, the twist drill is fitted with a pre-cutter that pre-cuts the wood fibres at the edge of the hole. The Lewis spiral ensures that chips are removed from the drill hole. The taper towards the shank, ranging from 1:50 to 1:100, is designed to prevent the drill from jamming in the hole and to ensure smooth cutting through the material.

This Ø 32 mm snake drill bit, 230 mm in length, is suitable for precise drilling in wood and wood-based materials. It can be used on beams, square timber, solid wood and laminated timber, and offers a manageable tool length for typical applications in workshops, assembly and timber construction. The drill bit is made from hardened carbon tool steel. This material provides a robust base for wood drill bits and ensures the cutting edges retain their shape even with repeated use. The hardening process improves wear resistance and helps the drill bit cut cleanly into the material. The centring tip ensures precise positioning, whilst the feed thread facilitates feed and reduces the required pressure. The pilot cutter ensures clean hole edges by pre-cutting the wood fibres at the edge of the hole. The Lewis spiral removes chips from the drill hole. The taper toward the shank, ranging from 1:50 to 1:100, is designed to reduce the risk of the drill bit becoming jammed in the hole.

This Ø 34 mm snake drill bit, 230 mm in length, is designed for drilling in wood and is suitable for beams, square-edged timber, solid wood, laminated timber and wood-based materials. The 230 mm version offers a manageable tool length for use in workshops, assembly, interior fitting and timber construction, where clean drill holes, precise positioning and reliable chip removal are required. The drill bit is made from hardened carbon tool steel. This material provides a stable foundation for wood drilling tools and supports a durable cutting geometry during regular use. The hardening process increases the wear resistance of the cutting edges and contributes to reliable drilling performance in typical wood-based materials. The centring tip enables precise positioning on the workpiece. The feed thread at the tip draws the drill bit into the wood in a controlled manner and reduces the required pressure. This promotes a smooth drilling process. To ensure clean hole edges, the snake drill bit is fitted with a pre-cutter. This pre-cuts the wood fibres at the edge of the hole and helps to reduce tear-outs. At the same time, the Lewis spiral ensures excellent chip evacuation and reliably transports the chips out of the drill hole. The taper toward the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole and to ensure smooth cutting through the material.

This Ø 35 mm snake drill bit, 230 mm in length, is designed for clean drilling in wood, beams, square timber, solid wood, laminated timber and wood-based materials. The 230 mm length ensures easy handling for applications in workshops, assembly, interior fitting and timber construction. The drill bit is made from hardened carbon tool steel, a robust tool steel for wood drilling tools with a stable cutting edge geometry. The hardening process makes the cutting edges more resistant to wear, which contributes to reliable drilling performance during repeated drilling operations. The centring tip makes it easier to position the drill accurately on the workpiece. The feed thread at the tip draws the drill bit into the material in a controlled manner and reduces the pressure required. The pilot cutter pre-cuts the wood fibres at the edge of the hole and helps to ensure clean hole edges. At the same time, the Lewis spiral ensures reliable chip evacuation and carries the chips out of the drill hole. The taper toward the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole, ensuring it runs smoothly through the material.

This Ø 36 mm snake drill bit, 230 mm in length, is suitable for drilling into beams, square-edged timber, solid wood, laminated timber and wood-based materials. The Lewis design combines a pronounced spiral with a centring tip, feed thread and pilot cutter, thereby ensuring clean holes and reliable chip removal. The drill bit is made from hardened carbon tool steel. The hardened tool steel ensures a durable cutting edge and is designed to meet the demands of typical wood drilling applications. The centring tip allows for precise positioning of the drill bit, whilst the feed thread pulls the drill bit into the wood in a controlled manner and reduces the required feed pressure. The pilot cutter pre-cuts the wood fibres at the edge of the borehole and helps to ensure clean hole edges. The spiral flutes carry the chips out of the borehole and ensure smooth operation. The taper towards the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the borehole.

This Ø 38 mm snake drill bit, 230 mm in length, is designed for drilling into wood in workshops, during assembly, in interior fitting and in timber construction. It can be used in beams, square-edged timber, solid wood, laminated timber and wood-based materials. The tool is made from hardened carbon tool steel, which ensures a robust and wear-resistant cutting edge. The hardening process helps to ensure that the cutting edges perform reliably with regular use and enable clean drilling. The centring tip helps to position the drill bit accurately. The feed thread reduces the required pressure by drawing the drill bit into the wood in a controlled manner. To ensure clean hole edges, the twist drill is fitted with a pre-cutter that pre-cuts the wood fibres at the edge of the hole. The Lewis spiral ensures that chips are removed from the drill hole. The taper towards the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole and to ensure smooth cutting through the material.

This Ø 40 mm snake drill bit, 230 mm in length, is suitable for precise drilling in wood and wood-based materials. It can be used for beams, square timber, solid wood and laminated timber, and offers a manageable tool length for typical applications in workshops, assembly and timber construction. The drill bit is made from hardened carbon tool steel. This material provides a robust base for wood drill bits and ensures the cutting edges retain their shape even with repeated use. The hardening process improves wear resistance and helps the drill bit cut cleanly into the material. The centring tip ensures precise positioning, whilst the feed thread facilitates feed and reduces the pressure required. The pilot cutter ensures clean hole edges by pre-cutting the wood fibres at the edge of the hole. The Lewis spiral removes chips from the drill hole. The taper toward the shank, ranging from 1:50 to 1:100, is designed to reduce the risk of the drill bit becoming jammed in the hole.

This 6 mm diameter snake drill bit, measuring 230 mm in length, is designed for drilling in wood and is suitable for beams, square-edged timber, solid wood, laminated timber and wood-based materials. The 230 mm version offers a manageable tool length for use in workshops, assembly, interior fitting and timber construction, where clean holes, precise positioning and reliable chip removal are required. The drill bit is manufactured from hardened carbon tool steel. This material provides a stable foundation for wood drilling tools and supports a durable cutting geometry during regular use. The hardening process increases the wear resistance of the cutting edges and contributes to reliable drilling performance in typical wood-based materials. The centring tip enables precise positioning on the workpiece. The feed thread at the tip draws the drill bit into the wood in a controlled manner and reduces the required pressure. This promotes a smooth drilling process. To ensure clean hole edges, the snake drill bit is fitted with a pre-cutter. This pre-cuts the wood fibres at the edge of the hole and helps to reduce tear-outs. At the same time, the Lewis spiral ensures excellent chip evacuation and reliably transports the chips out of the drill hole. The taper toward the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole and to ensure smooth cutting action through the material.

This Ø 8 mm auger bit, 230 mm in length, is designed for drilling in wood and is suitable for beams, square timber, solid wood, laminated timber and wood-based materials. The 230 mm version offers a manageable tool length for use in workshops, assembly, interior fitting and timber construction, where clean drill holes, precise positioning and reliable chip removal are required. The drill bit is manufactured from hardened carbon tool steel. This material provides a stable foundation for wood drilling tools and supports a durable cutting geometry during regular use. The hardening process increases the wear resistance of the cutting edges and contributes to reliable drilling performance in typical wood-based materials. The centring tip enables precise positioning on the workpiece. The feed thread at the tip draws the drill bit into the wood in a controlled manner and reduces the required pressure. This promotes a smooth drilling process. To ensure clean hole edges, the snake drill bit is fitted with a pre-cutter. This pre-cuts the wood fibres at the edge of the hole and helps to reduce tear-outs. At the same time, the Lewis spiral ensures excellent chip evacuation and reliably transports the chips out of the drill hole. The taper toward the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole and to ensure smooth cutting through the material.

Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

The set is supplied in a practical wooden box.