Auger bit Ø 14 mm, length 460 mm, shape Lewis
€5.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Auger bits are particularly suitable for deep-hole drilling in softwood and European hardwood, such as beech and oak. They are not suitable for tropical hardwoods.
Drill bits up to a diameter of 20 mm are used in hand drills or powerful cordless screwdrivers.
Technical data
| Nominal diameter [mm]: | 14 |
|---|---|
| Total length [mm]: | 460 |
| Ø shaft [mm]: | 12 |
Made from hardened carbon tool steel
Precise centring possible thanks to centring tip
Retractable thread on centre point, therefore little pressure required
Very good chip removal
Clean hole edge thanks to the pre-cutter
Description of the
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Scope of delivery
- 1 x auger bit Ø 14 mm, length 460 mm, shape Lewis
More about the brand and products from
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
The set is supplied in a practical wooden box.
€5.00*
Content: 1 pcs
€4.00*
Content: 1 pcs
€5.00*
Content: 1 pcs
€5.00*
Content: 1 pcs
€6.00*
Content: 1 pcs
€7.00*
Content: 1 pcs
€7.00*
Content: 1 pcs
€8.00*
Content: 1 pcs
€8.00*
Content: 1 pcs
€9.00*
Content: 1 pcs
€10.00*
Content: 1 pcs
€11.00*
Content: 1 pcs
€12.00*
Content: 1 pcs
€14.00*
Content: 1 pcs
€15.00*
Content: 1 pcs
€27.00*
Content: 1 pcs
€30.00*
Content: 1 pcs
€31.00*
Content: 1 pcs
€32.00*
Content: 1 pcs
€35.00*
Content: 1 pcs
€3.00*
Content: 1 pcs
€4.00*
Content: 1 pcs
€30.50*
Content: 1 pcs