Auger bit Ø 36 mm, length 200 mm, shape Lewis

Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

This 10 mm diameter snake drill bit, 200 mm in length, is suitable for making deep holes in wood and wood-based materials. It is suitable for applications on beams, square timber, solid wood or structural timber elements and is particularly useful when precise guidance is required over a greater drilling depth. The centring tip ensures that the drill bit starts cleanly on the workpiece. The feed thread at the tip aids the feed by pulling the drill bit into the material. This reduces the pressure required during drilling, which is particularly advantageous for longer holes and thicker timber sections. The pilot cutter pre-cuts the wood fibres at the edge of the hole and helps to create a clean hole edge. At the same time, the pronounced spiral shape aids chip removal from the hole. This allows the drill bit to work more smoothly and ensures that chips are reliably removed from the drill hole. The auger bit is crafted from hardened carbon tool steel, making it suitable for common wood-drilling applications in workshops, assembly, timber construction and interior fitting. The taper towards the shank, ranging from 1:50 to 1:100, is designed to help prevent the drill bit from jamming in the hole. With a diameter of 10 mm and a total length of 200 mm, this Lewis auger bit is a practical choice for clean, deep wood drilling where precise positioning, controlled feed and good chip removal are required.

This 12 mm diameter snake drill bit, 200 mm in length, is designed for drilling in wood where a larger hole and precise guidance are required. It is suitable for beams, square timber, solid wood, laminated timber and other wood-based materials, and can be used both in the workshop and for assembly and timber construction work. The centring tip makes it easier to position the drill precisely on the workpiece. The feed thread at the tip assists the drilling process by pulling the drill bit into the material automatically. This reduces the pressure required and ensures that the feed remains easily controllable even when drilling deeper holes. The pilot cutter ensures that the wood fibres at the edge of the drill hole are cleanly separated. This results in more precise hole edges and helps to reduce tear-outs. The pronounced spiral shape is designed for efficient chip removal and reliably transports the chips out of the drill hole. The drill bit is crafted from hardened carbon tool steel and is suitable for standard wood drilling tasks requiring larger diameters. The taper towards the shank, ranging from 1:50 to 1:100, is designed to prevent the drill from jamming in the hole, which is particularly advantageous for deeper drill holes. With a diameter of 12 mm and a total length of 200 mm, this Lewis auger bit is a suitable choice for clean, deep wood drilling in structural timber components, beams and square timber.

This Ø 13 mm snake drill bit, 200 mm in length, is designed for drilling in wood where a clean hole with a larger diameter is required. It is suitable for use in beams, square timber, solid wood, laminated timber and other wood-based materials, making it ideal for workshops, assembly, interior fitting and timber construction. The centring tip allows for controlled and precise positioning on the workpiece. The feed thread at the tip pulls the drill bit into the material during drilling, reducing the amount of pressure required. This makes deeper drilling easier and ensures a smooth feed. To ensure a clean hole edge, the drill bit is equipped with a pilot cutter. This pre-cuts the wood fibres at the edge of the drill hole and helps to reduce tear-outs. The Lewis spiral also ensures good chip removal, so that chips are reliably transported out of the drill hole. The auger bit is made of hardened carbon tool steel and is designed for typical wood drilling tasks involving greater drilling depths. The taper towards the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole. With a diameter of 13 mm and a total length of 200 mm, this Lewis auger bit is particularly suitable for deep wood drilling where a clean start, controlled feed and reliable chip removal are important.

This 14 mm diameter snake drill bit, 200 mm in length, is designed for drilling in wood where a greater drilling depth and a clean, controlled cut are required. It is suitable for beams, square timber, solid wood, laminated timber and various wood-based materials, and can be used in workshops, assembly, interior fitting and timber construction. The centring tip aids precise positioning of the drill bit on the workpiece. The feed thread at the tip allows the drill bit to be drawn into the wood in a controlled manner, reducing the pressure required during drilling. This makes drilling into thicker sections of timber particularly easier and ensures a smooth feed. The integrated pre-cutter pre-cuts the wood fibres at the edge of the drill hole. This results in clean hole edges and helps to reduce tear-outs. The Lewis spiral is designed for reliable chip removal and transports the chips out of the hole, ensuring the drill bit can work cleanly even during deeper drilling. The twist drill is made from hardened carbon tool steel. The taper towards the shank, ranging from 1:50 to 1:100, is designed to prevent the drill from jamming in the hole and ensures easier working with longer drill channels. With a diameter of 14 mm and a total length of 200 mm, this Lewis auger bit is a suitable choice for deep wood drilling where precise positioning, clean hole edges and good chip removal are required.

This 16 mm diameter auger bit, 200 mm in length, is designed for drilling holes in wood where a greater drilling depth and a clean, controlled cut are required. It is suitable for beams, square-edged timber, solid wood, laminated timber and various wood-based materials, and can be used in workshops, assembly, interior fitting and timber construction. The centring tip helps to position the drill bit precisely on the workpiece. The feed thread at the tip allows the drill bit to be drawn into the wood in a controlled manner, reducing the pressure required during drilling. This makes drilling into thicker sections of timber particularly easier and ensures a consistent feed rate. The integrated pilot cutter pre-cuts the wood fibres at the edge of the drill hole. This produces clean hole edges and helps to reduce tear-outs. The Lewis spiral is designed for reliable chip removal and transports the chips out of the hole, ensuring the drill bit can operate cleanly even when drilling to greater depths. The auger bit is crafted from hardened carbon tool steel. The taper towards the shank, ranging from 1:50 to 1:100, is designed to prevent the bit from jamming in the hole and ensures easier working when drilling longer holes. With a diameter of 16 mm and a total length of 200 mm, this Lewis snake drill bit is a suitable choice for deep holes in wood where precise positioning, clean hole edges and good chip removal are required.

This Ø 18 mm auger drill bit, 200 mm in length, is suitable for drilling in wood where a larger drill diameter and precise guidance are required. It can be used on beams, square-edged timber, solid wood, laminated timber and wood-based materials, making it suitable for workshops, assembly work, interior fitting and timber construction. The centring tip ensures controlled contact with the workpiece. The feed thread at the tip pulls the drill bit into the material during drilling and reduces the required pressure. This promotes a consistent feed rate, particularly when working with larger diameters and deeper holes. To ensure a clean hole edge, the drill bit is fitted with a pilot cutter. This pre-cuts the wood fibres at the edge of the hole and helps to reduce tear-outs. The Lewis spiral ensures excellent chip removal and reliably transports the chips out of the borehole. The auger bit is made from hardened carbon tool steel and is designed for typical wood drilling applications involving larger diameters. The taper towards the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole. With a diameter of 18 mm and a total length of 200 mm, this Lewis auger bit is a suitable choice for deep drilling in thicker sections of timber, where clean hole edges, precise entry and reliable chip removal are required.

This Ø 19 mm auger drill bit, 200 mm in length, is designed for drilling in wood where a larger drill diameter and good guidance are required. It is suitable for work on beams, square timber, solid wood, laminated timber and wood-based materials, and can be used in workshops, assembly, interior fitting and timber construction. The centring tip allows the drill bit to be positioned precisely on the workpiece. The feed thread at the tip pulls the drill bit into the material during drilling and reduces the required contact pressure. This allows the drilling process to be carried out in a controlled manner, even with larger diameters. To ensure clean drill hole edges, the twist drill is equipped with a pilot cutter. This pre-cuts the wood fibres at the edge of the hole and helps to reduce tear-outs. The Lewis spiral ensures reliable chip removal and transports the chips cleanly out of the drill hole. The drill bit is constructed from hardened carbon tool steel. The taper towards the shank, ranging from 1:50 to 1:100, is designed to prevent jamming in the hole and facilitates working in deeper drill channels. With a diameter of 19 mm and a total length of 200 mm, this Lewis auger bit is a suitable choice for deep wood drilling in thicker timber sections where precise positioning, clean hole edges and good chip removal are important.

This 20 mm diameter auger bit, 200 mm in length, is designed for deep wood drilling with a 20 mm diameter. It is suitable for drilling in beams, square timber, solid wood, laminated timber and wood-based materials, and can be used in workshops, assembly, interior fitting and timber construction. The centring tip allows for precise positioning on the workpiece. The feed thread at the tip pulls the drill bit into the material in a controlled manner during drilling and reduces the required contact pressure. This allows the drilling process to be carried out smoothly, even with larger bore diameters and deeper holes. The pilot cutter pre-cuts the wood fibres at the edge of the hole and helps to produce clean hole edges. The Lewis spiral ensures reliable chip removal, transporting chips out of the drill hole and keeping the drill bit clean during the cut. The snake drill bit is crafted from hardened carbon tool steel. The taper towards the shank, ranging from 1:50 to 1:100, is designed to prevent the drill bit from jamming in the hole. This is particularly advantageous for deeper drill holes and longer drilling operations. With a diameter of 20 mm and a total length of 200 mm, this Lewis auger bit is a suitable choice for deep wood drilling in thicker timber sections where precise positioning, clean hole edges and good chip removal are required.

This Ø 22 mm snake drill bit, 200 mm in length, is designed for deep drilling in wood with a 22 mm diameter. It is suitable for use in beams, square-edged timber, solid wood, laminated timber and wood-based materials, and can be used in workshops, assembly, interior fitting and timber construction. The centring tip ensures precise positioning of the drill bit on the workpiece. The feed thread at the tip draws the drill bit into the wood in a controlled manner and reduces the required pressure. This promotes a consistent feed rate, particularly for deeper holes and thicker timber sections. To ensure clean hole edges, the drill bit is fitted with a pilot cutter. This pre-cuts the wood fibres at the edge of the hole and helps to reduce tear-outs. At the same time, the Lewis spiral ensures effective chip removal and reliably transports the chips out of the drill hole. The auger bit is crafted from hardened carbon tool steel and is suitable for standard wood drilling tasks requiring larger diameters. The taper toward the shank, ranging from 1:50 to 1:100, is designed to prevent the bit from jamming in the hole. With a diameter of 22 mm and a total length of 200 mm, this Lewis auger bit is a suitable choice for deep drilling in timber, such as beams, square-edged timber and other wood-based materials, where precise positioning, clean hole edges and reliable chip removal are required.

Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

This 6 mm diameter snake drill bit, 200 mm in length, is designed for precise and deep drilling in wood. The Lewis shape is particularly suitable for drilling in beams, square timber, solid wood and wood-based materials where clean guidance and good chip removal are required. The centring tip allows the drill bit to be positioned precisely on the workpiece. The integrated feed thread on the centring tip pulls the drill bit into the material automatically, reducing the pressure required during drilling. This makes longer drilling operations particularly easier and supports a smooth feed. To ensure clean hole edges, the twist drill is equipped with a pre-cutter. This pre-cuts the fibres at the edge of the hole and reduces tearing at the hole edge. The pronounced spiral shape ensures excellent chip removal from the hole and helps the drill bit to work cleanly even when drilling deeper holes. The drill bit is crafted from hardened carbon tool steel and is suitable for standard wood drilling applications in workshops, assembly, timber construction and interior finishing. A taper from 1:50 to 1:100 towards the shank is designed to prevent the drill bit from jamming in the hole. With a diameter of 6 mm and a length of 200 mm, this auger bit is a suitable choice for deep, precise drilling in wood where good guidance, clean hole edges and reliable chip removal are required.

This Ø 8 mm auger bit, 200 mm in length, is designed for precise drilling in wood. The Lewis shape is particularly suitable for deep drilling in beams, square timber, solid wood and wood-based materials where good guidance and reliable chip removal are required. The centring tip ensures the drill bit is positioned precisely on the workpiece. The integrated feed thread pulls the drill bit into the material in a controlled manner and reduces the pressure required during drilling. This allows the drill bit to be guided effectively even when drilling deep holes. To ensure clean hole edges, the snake drill bit is equipped with a pilot cutter. This pre-cuts the wood fibres at the edge of the drill hole and helps to reduce tear-outs at the hole edge. The spiral shape carries the chips out of the hole and ensures smooth operation. The drill bit is made of hardened carbon tool steel and is suitable for typical wood drilling tasks in workshops, assembly, timber construction and interior fitting. A taper from the shank towards the tip of 1:50 to 1:100 is designed to prevent the drill bit from jamming in the hole. With a diameter of 8 mm and a length of 200 mm, this auger bit is a suitable choice for deep wood drilling where clean hole edges, good centring and reliable chip removal are required.

The auger bits in this set are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

The set is supplied in a practical wooden box.

The auger bits in this set are made from high-quality, hardened carbon tool steel. This choice of material enables a high cutting performance and load capacity. The auger bit is also equipped with a centring tip, which enables very precise centring of the bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.

While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.

The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.

A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.

The set is supplied in a practical wooden box.