Auger bit set, 8-piece Ø 6 - 20 mm, length 200 mm, Lewis shape
€15.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Snake drill bits are particularly well suited for deep-hole drilling in softwood and European hardwoods, such as beech and oak. They are not suitable for tropical hardwoods.
Drill bits with a diameter of up to 20 mm are used in hand drills or powerful cordless screwdrivers.
Technical data
| Nominal diameter [mm]: | 6, 8, 10, 12, 14, 16, 18, 20 |
|---|---|
| Total length [mm]: | 200 |
| Material: | Carbon tool steel |
Made from hardened carbon tool steel
Precise centring is possible thanks to the centring tip
Feed thread on the centring tip, requiring minimal pressure
Excellent chip removal
Clean hole edges thanks to the pilot cutter
Description of the
The auger bits in this set are made from high-quality, hardened carbon tool steel. This choice of material enables a high cutting performance and load capacity. The auger bit is also equipped with a centring tip, which enables very precise centring of the bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
The set is supplied in a practical wooden box.
Scope of delivery
- 1 x auger bit Ø 6 mm, length 200 mm, shank 6 mm, hexagonal, Lewis type
- 1 x auger bit Ø 8 mm, length 200 mm, shank 7 mm, hexagonal, Lewis type
- 1 x auger bit Ø 10 mm, length 200 mm, shank 9 mm, hexagonal, Lewis type
- 1 x auger bit Ø 12 mm, length 200 mm, shank diameter 10.5 mm, hexagonal, Lewis type
- 1 x auger bit Ø 14 mm, length 200 mm, shank diameter 10.5 mm, hexagonal, Lewis type
- 1 x auger bit Ø 16 mm, length 200 mm, shank diameter 10.5 mm, hexagonal, Lewis shape
- 1 x auger bit Ø 18 mm, length 200 mm, shank diameter 10.5 mm, hexagonal, Lewis type
- 1 x auger bit Ø 20 mm, length 200 mm, shank diameter 10.5 mm, hexagonal, Lewis type
More about the brand and products from
The auger bits in this set are made from high-quality, hardened carbon tool steel. This choice of material enables a high cutting performance and load capacity. The auger bit is also equipped with a centring tip, which enables very precise centring of the bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
The set is supplied in a practical wooden box.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
The set is supplied in a practical wooden box.
Our auger bits are made from high-quality, hardened carbon tool steel. This choice of material enables high cutting performance and resilience. The auger bit is also equipped with a centring tip, which enables very precise centring of the drill bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
The set is supplied in a practical wooden box.
The auger bits in this set are made from high-quality, hardened carbon tool steel. This choice of material enables a high cutting performance and load capacity. The auger bit is also equipped with a centring tip, which enables very precise centring of the bit. A retractable thread on the centre point pulls the drill bit into the wood so that less pressure needs to be exerted when drilling.
While a clean and tear-free hole edge can also be produced at low speeds thanks to the pre-cutter, the auger bit also impresses with very good chip removal.
The auger bit is suitable for drilling through holes in beams and rafters as well as for making deep blind holes.
A taper in the direction of the clamping shank of 1:50 to 1:100 is intended to prevent jamming in the hole.
The set is supplied in a practical wooden box.
€15.50*
Contents: 1 pcs
€17.50*
Contents: 1 pcs
€30.50*
Contents: 1 pcs
€37.50*
Contents: 1 pcs
2 Reviews
1 February 2023 09:10
Preis Leistung unschlagbar, sehr gute Ergebnisse beim
Preis Leistung unschlagbar, sehr gute Ergebnisse beim bohren! Bin sehr zufrieden.
24 January 2023 10:32
Hallo Team Paulimot,bin sehr zu Frieden mit
Hallo Team Paulimot,bin sehr zu Frieden mit Ihrer Arbeit. Kaufe gerne wieder!