Boring bar for internal thread 12 mm SIR0012M16
€22.90*
% €30.00* (23.67% saved)Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Turning tools with replaceable cutting inserts are characterised by the fact that worn cutting edges can be replaced quickly and easily. This eliminates the need for the tedious and time-consuming task of re-sharpening the cutting edge. A further advantage of turning tools with indexable or interchangeable cutting inserts is that, depending on the material to be machined, the most suitable cutting insert can be fitted to the holder. For example, there are special cutting inserts for machining aluminium or non-ferrous metals. Both the holders and the cutting inserts are standardised and can be identified by their respective standard designations.
Technical data
| Areas of application: | metric internal thread |
|---|---|
| Bore Ø min. [mm]: | 18 |
| Cutting plate: | 16IRAG60 |
| Execution: | right |
| Gradient range [mm]: | 0,5 - 3,0 |
| Height of support to cutting edge [mm]: | 10 |
| Shank Ø [mm]: | 12 |
| Standard designation: | SIR0012M16 |
| Surface: | burnished |
| Total length [mm]: | 152 |
Right-hand threading tool
Cutting inserts available for specialised applications
Replacement cutting inserts available individually or in sets of 10
Includes a Torx key for quick replacement of the cutting insert
Includes boring bar holder 15 x 15 x 80 mm
Description of the
This boring bar with the standard designation SIR0012M16 has a shank with a diameter of 12 mm and an overall length of 152 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Scope of delivery
- 1 x SIR0012M16 boring bar
- 1 x boring bar holder
- 1 x T15 Torx key
More about the brand and products from
This boring bar with the standard designation SIR0012M16 has a shank with a diameter of 12 mm and an overall length of 152 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This boring bar with the standard designation SIR0010K08 has a shank with a diameter of 10 mm and an overall length of 125 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
This boring bar with the standard designation SIR0012M11 has a shank with a diameter of 12 mm and an overall length of 151 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
€22.90*
Contents: 1 pcs
€24.50*
Contents: 1 pcs
€22.90*
Contents: 1 pcs
1 - 10 by 32 Reviews
1 February 2023 10:02
Super Bohrstange zum vernünftigen Preis
habe mehrere M33x2I Innengewinde geschnitten, saubere Schnitte passt einwandfrei bin sehr zufrieden. Gute Qualutät Preis.-Leistung ist in Ordnung. Gerne wieder
30 March 2022 08:38
Tolles Produkt. Gut, dass auch gleich der
Tolles Produkt. Gut, dass auch gleich der Vierkant-Klemmhalter dabei ist. Sehr gutes Preis/Leistungs-Verhältnis.
17 December 2021 00:00
Bisher voll zufrieden
Schnelle korrekte Lieferung, guter äußerer Eindruck. Noch nicht benutzt, deshalb keine Einsatzerfahrung.
10 August 2021 00:00
Alles OK
Genau wie beschrieben. Passt,
21 June 2021 00:00
Funktioniert einwandfrei
Bereits mehrere Gewinde geschnitten. Von Vorteil ist, das die Bohrstange frei drehbar / klemmbar ist. Bei Verwendung von Teilprofil-Schneidplatten lassen sich so mit einer Plattengröße eine Vielzahl verschiedener Gewindedurchmesser herstellen. Der dabei inkaufzunehmende Profilfehler dürfte in den meisten Fällen vernachlässigbar sein. Leider fehlen im Angebotssortiment die Platten für zöllige Gewinde (55°)
17 June 2021 00:00
a
très bien conforme à mes attentes, livraison très rapide
18 January 2021 00:00
Schnell und Gut
schnelle Lieferung, gute Qualität, entspricht meinen Erwartungen
5 January 2021 00:00
??
Schnelle Lieferung -alles perfekt
25 September 2020 00:00
Alles gut
Prompte Lieferung, gute Qualität!
15 September 2020 00:00
... hat tatsächlich funktioniert!
Ich habe den Drehmeißel gebraucht, um ein 18x2mm Innen-Linksgewinde zu schneiden. Für das 16mm Loch war den Drehmeißel nominell zu groß (Bohrdurchmesser min. 18mm). Mit einer etwas gedrehten und nach oben versetzten Ausrichtung (damit er nicht unten am Loch aufsitzt) ging es dann doch! Ohne Hülse im Schnellspanner für 12mm gespannt! Hat also funktioniert, wie erhofft!