Boring bar with cutting insert 10 mm S10K-SCLCR06
€16.00*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Intended use: Turning tools with replaceable cutting inserts are characterised by the fact that worn cutting edges can be replaced quickly and easily. This eliminates the tedious and time-consuming task of regrinding the cutting edge. A further advantage of turning tools with indexable or interchangeable cutting inserts is that, depending on the material to be machined, the most suitable cutting insert can be fitted to the holder. For example, there are special cutting inserts for machining aluminium or non-ferrous metals. Both the holders and the cutting inserts are standardised and can be identified by their respective standard designations.
Technical data
| Areas of application: | Internal boring |
|---|---|
| Bore Ø min. [mm]: | 16 |
| Cutting plate: | CCMT060204 |
| Execution: | right |
| Shank Ø [mm]: | 10 |
| Standard designation: | S10K-SCLCR06 |
| Surface: | burnished |
| Total length [mm]: | 126 |
Right-hand internal turning tool
Cutting inserts available for specialised applications
Replacement cutting inserts available individually or in sets of 10
Includes a Torx key for quick replacement of the cutting insert
Description of the
This boring bar with the standard designation S10K-SCLCR06 has a shank with a diameter of 10 mm and an overall length of 126 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
Scope of delivery
- 1 x drill rod S10K-SCLCR06
- 1 x T8 Torx key
More about the brand and products from
This boring bar with the standard designation S10K-SCLCR06 has a shank with a diameter of 10 mm and an overall length of 126 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
This boring bar with the standard designation S06H-SCLCR06 has a shank with a diameter of 6 mm and an overall length of 101 mm. The insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
This boring bar with the standard designation S08H-SCLCR06 has a shank with a diameter of 8 mm and an overall length of 100 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
This boring bar with the standard designation S12M-SCLCR06 has a shank with a diameter of 12 mm and an overall length of 151 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
This boring bar with the standard designation S16R-SCLCR09 has a shank with a diameter of 16 mm and an overall length of 200 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
€16.00*
Contents: 1 pcs
€15.50*
Contents: 1 pcs
€15.50*
Contents: 1 pcs
€16.50*
Contents: 1 pcs
€19.90*
Contents: 1 Piece
1 - 10 by 47 Reviews
31 December 2025 14:05
alles prima
alles prima
3 March 2025 09:18
Alles bestens
Alles bestens
11 July 2022 14:44
Bohrstange
Einfach ein super Service! So wird Kundenzufriedenheit praktiziert. Vielen Dank!
31 March 2022 14:31
Alles Bestens
Sehr gute verarbeitung. Bin sehr zufrieden. jederzeit wieder.
31 March 2022 04:59
Sehr gut, gerne wieder.
Sehr gut, gerne wieder.
24 March 2022 11:29
Wie immer super schnelle Lieferung
Wie immer super schnelle Lieferung
17 May 2021 00:00
Bohrstange
Meine nicht Ausführliche Bewertung, wer die Paulimot Produkte kennt und schätz braucht nicht wirklich ein Wahnsinns Bewertung, Bohrst ange made in China, aber trotz alle dem, Eine saubere Verarbeitungung, geölt und Poliert, Einwandfrei!!!
20 April 2021 00:00
Passt
Gleiche schneidplatten auf verschiedenen Werkzeugen sin immer gut.
8 February 2021 00:00
Bewertung der 1 - 3 Artikel zusammengefasst
schnelle zuverlässige Lieferung
11 December 2020 00:00
Sehr gute Qalität, Preiswert
Sehr gute Qalität, Preiswert