Boring bar with insert 12 mm S12M-SCLCR06

This boring bar with the standard designation S12M-SCLCR06 has a shank with a diameter of 12 mm and an overall length of 151 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.

For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.

Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.

This boring bar with the standard designation S06H-SCLCR06 has a shank with a diameter of 6 mm and an overall length of 101 mm. The insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.

For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.

Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.

This boring bar with the standard designation S08H-SCLCR06 has a shank with a diameter of 8 mm and an overall length of 100 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.

For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.

Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.

This boring bar with the standard designation S10K-SCLCR06 has a shank with a diameter of 10 mm and an overall length of 126 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.

For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.

Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.

This boring bar with the standard designation S16R-SCLCR09 has a shank with a diameter of 16 mm and an overall length of 200 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.

For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.

Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.