Boring bar with insert 16 mm S16R-SCLCR09
€19.90*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Turning tools with replaceable cutting inserts are characterised by the fact that worn cutting edges can be replaced quickly and easily. This eliminates the need for the tedious and time-consuming task of re-sharpening the cutting edge. A further advantage of turning tools with indexable or interchangeable cutting inserts is that, depending on the material to be machined, the most suitable cutting insert can be fitted to the holder. For example, there are special cutting inserts for machining aluminium or non-ferrous metals. Both the holders and the cutting inserts are standardised and can be identified by their respective standard designations.
Technical data
| Areas of application: | Internal boring |
|---|---|
| Bore Ø min. [mm]: | 23 |
| Cutting plate: | CCMT09T304 |
| Execution: | right |
| Shank Ø [mm]: | 16 |
| Standard designation: | S16R-SCLCR09 |
| Surface: | burnished |
| Total length [mm]: | 200 |
Right-hand internal turning tool
Cutting inserts available for specialised applications
Replacement cutting inserts available individually or in sets of 10
Includes a Torx key for quick replacement of the cutting insert
Description of the
This boring bar with the standard designation S16R-SCLCR09 has a shank with a diameter of 16 mm and an overall length of 200 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
Scope of delivery
- 1 x drill rod S16R-SCLCR09
- 1 x T15 Torx key
More about the brand and products from
This boring bar with the standard designation S16R-SCLCR09 has a shank with a diameter of 16 mm and an overall length of 200 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
This boring bar with the standard designation S06H-SCLCR06 has a shank with a diameter of 6 mm and an overall length of 101 mm. The insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
This boring bar with the standard designation S08H-SCLCR06 has a shank with a diameter of 8 mm and an overall length of 100 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
This boring bar with the standard designation S10K-SCLCR06 has a shank with a diameter of 10 mm and an overall length of 126 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
This boring bar with the standard designation S12M-SCLCR06 has a shank with a diameter of 12 mm and an overall length of 151 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
€19.90*
Contents: 1 Piece
€15.50*
Contents: 1 pcs
€15.50*
Contents: 1 pcs
€16.00*
Contents: 1 pcs
€16.50*
Contents: 1 pcs
1 - 10 by 18 Reviews
16 August 2026 18:29
1A Drehstahl
Macht Spaß damit zu arbeiten, habe gute Ergebnisse in Edelstahl damit erzielt.
5 March 2026 18:52
Alles Gut gelaufen
Alles Gut gelaufen
11 December 2022 19:16
Ich bin begeistert von der Bohrstange mit
Ich bin begeistert von der Bohrstange mit Schneidplatte 16 mm S16R-SCLCR09.Das ausdrehen der Werkstücke mit dieser Bohrstange geht super,danke.
21 September 2022 09:18
Ok.
Preis Leistung ok.
11 December 2021 00:00
Trés bien
Rapport qualité prix très bien
2 July 2021 00:00
Günstig und gut
Verwendet auf kleiner 210x400 Drehmaschine. Funktioniert gut und konnte keinen Fehler feststellen…. Schnell geliefert (in die Schweiz)
29 April 2021 00:00
qualität ist ok
Verarbeitung ist ok
23 February 2021 00:00
Wie immer Perfekt
Der netteste Kontakt den ich seit langem hatte. Problem wurde ohne Umwege gelöst.So geht Kunden-Freundlichkeit. Das Produkt hat die Qualität die ich von dieser Firma gewohnt bin.Ich bin mehr als zufrieden. DANKE
30 December 2020 00:00
Bohrstange
Super Werkzeug!
27 September 2020 00:00
Preis- /Leistungsverhältnis überzeugend
Habe die Bohrstange schon mehrfach bei verschiedenen Materialien eingesetzt*. In Stahl sogar über 100mm tief gedreht bei Ø26. Bin mit den Oberflächengüten und den Passmassen sehr zufrieden. * bis jetzt nur mit der mitgelieferten Schneidplatte.