Boring bar with insert 16 mm S16R-SDUCR07
€19.90*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Turning tools with replaceable cutting inserts are characterised by the fact that worn cutting edges can be replaced quickly and easily. This eliminates the need for the tedious and time-consuming task of re-sharpening the cutting edge. A further advantage of turning tools with indexable or interchangeable cutting inserts is that, depending on the material to be machined, the most suitable cutting insert can be fitted to the holder. For example, there are special cutting inserts for machining aluminium or non-ferrous metals. Both the holders and the cutting inserts are standardised and can be identified by their respective standard designations.
Technical data
| Areas of application: | Internal boring |
|---|---|
| Bore Ø min. [mm]: | 24 |
| Cutting plate: | DCMT070204 |
| Execution: | right |
| Shank Ø [mm]: | 16 |
| Standard designation: | S16R-SDUCR07 |
| Surface: | burnished |
| Total length [mm]: | 200 |
Right-hand internal turning tool
Cutting inserts available for specialised applications
Replacement cutting inserts available individually or in sets of 10
Includes a Torx key for quick replacement of the cutting insert
Description of the
This boring bar with the standard designation S16R-SDUCR07 has a shank with a diameter of 16 mm and an overall length of 200 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
Scope of delivery
- 1 x drill rod S16R-SDUCR07
- 1 x T8 Torx key
More about the brand and products from
This boring bar with the standard designation S16R-SDUCR07 has a shank with a diameter of 16 mm and an overall length of 200 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
This boring bar with the standard designation S10K-SDUCR07 has a shank with a diameter of 10 mm and an overall length of 127 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
This boring bar with the standard designation S12M-SDUCR07 has a shank with a diameter of 12 mm and an overall length of 152 mm. The cutting insert is made of sintered carbide. In contrast to HSS bits, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and a longer service life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined just as well as hard materials.
For special applications, this carbide insert can be replaced by another insert that is suitable for the material to be machined. You can find these special indexable inserts in our range. You can also order the standard inserts from us individually or as a set of 10.
Note: In order to be able to clamp a boring bar with a round clamping shank in a chisel or steel holder with a flat contact surface, a so-called boring bar holder with a corresponding internal diameter is required.
€19.90*
Contents: 1 Piece
€16.00*
Contents: 1 pcs
€16.50*
Contents: 1 pcs
6 Reviews
12 June 2024 19:00
alles top
alles top
20 February 2024 05:23
Sehr zu empfehlen
Wie alles von Paulimot Top
6 June 2020 00:00
Topp Preis Leistung
Sehr stabile Ausführung. Keine Schwingungen bei einer Bohrungstiefe von 70mm. Topp Qualität. Sehr empfehlenswert. Würde ich immer wieder kaufen.
2 February 2020 00:00
Super, wie beschrieben
Einsetzbarer Meißel, gut zu verwenden. Sofort wieder.
12 February 2019 00:00
GUT
Gute Ware und Qualität für den Preis!
30 January 2019 00:00
Stabile Bohrstange
Diese Bohrstange ist sehr stabil und arbeitet ohne zu schwingen auch bei tieferen Bohrungen