Carbide indexable insert MGGN200 LH-A, polished
€5.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Indexable inserts are used in machining and are mounted on the turning tools or milling cutters intended for this purpose. Depending on the intended use or the material to be machined, inserts are available in various shapes and with special coatings. For example, there are special inserts for machining aluminium or non-ferrous metals. The inserts are standardised and can be identified by the respective standard designation. If a cutting insert is worn, it is simply replaced with a new insert.
Technical data
| Areas of application: | Grooving, Parting off |
|---|---|
| Clearance angle [°]: | 7 |
| Cutting edge radius [mm]: | 0,2 |
| Grooving width [mm]: | 2 |
| Standard designation: | MGGN200 LH-A |
| Surface: | Ground and polished |
Carbide insert polished and ground, resulting in an extremely sharp cutting edge
Sintered chip breakers for excellent chip breaking
Highly positive geometry
For machining aluminium, non-ferrous metals, cast iron
For the extended range of applications with wood, plastic, refractory, steel and stainless materials
Description of the
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
Scope of delivery
- 1 x carbide indexable insert MGGN200 LH-A
More about the brand and products from
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
€5.50*
Content: 1 Piece
€49.50*
Content: 1 Piece
€54.00*
Content: 1 Piece
€6.00*
Content: 1 Piece
12 March 2025 12:24
Erfüllt voll und ganz meiner Erwartung.
Erfüllt voll und ganz meiner Erwartung.
26 October 2023 16:46
Gute Qualität
Gute Qualität
1 November 2022 09:18
Gutes Produkt
Gutes Produkt
29 August 2022 08:56
problemlos und termingerecht
wie beschrieben tadellos
3 May 2022 06:12
Habe die Schneidplatte für die Edelstahlbearbeitung beschafft
Habe die Schneidplatte für die Edelstahlbearbeitung beschafft und dafür ist sie erwartungsgemäß geeignet. Zur Standzeit kann ich (noch) nichts sagen.
26 April 2022 10:19
Artikel wie angeboten, alles OK, gerne wieder
Artikel wie angeboten, alles OK, gerne wieder
28 January 2022 00:00
Super für Alu
funktioniert sowohl mit weichem Alu als auch mit hochfesten Alu-Legierungen. Abstechen ohne Probleme.
23 December 2021 00:00
Parting off insert
Have not had much luck with these, so far two have broken when being used on brass, will try to adjust the tool height and speed
15 August 2021 00:00
Wendeschneidplatten
Alles bestens,