Carbide indexable insert RCGT10T3MO-AH-A, polished
€5.50*
Prices incl. 19% VAT. plus Shipping costs
Delivery time: 1-3 working days **
More than 10 pieces available (online and in specialist shops)
Intended use
Indexable inserts are used in machining and are mounted on the turning tools or milling cutters intended for this purpose. Depending on the intended use or the material to be machined, inserts are available in various shapes and with special coatings. For example, there are special inserts for machining aluminium or non-ferrous metals. The inserts are standardised and can be identified by the respective standard designation. If a cutting insert is worn, it is simply replaced with a new insert.
Technical data
| Areas of application: | Longitudinal turning, Mould turning, Surface finish |
|---|---|
| Clearance angle [°]: | 7 |
| Standard designation: | RCGT10T3MO-AH-A |
| Surface: | Ground and polished |
| Ă˜ plate [mm]: | 10 |
Carbide insert polished and ground, resulting in an extremely sharp cutting edge
Sintered chip breakers for excellent chip breaking
Highly positive geometry
For machining aluminium, non-ferrous metals, cast iron
For the extended range of applications with wood, plastic, refractory, steel and stainless materials
Description of the
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
Scope of delivery
- 1 x carbide indexable insert RCGT10T3MO-AH-A
More about the brand and products fromÂ
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
The advantages and properties of this polished insert:
The highly positive geometry in combination with the sharply ground cutting edges and the sintered chip breakers enable excellent machining of aluminium and non-ferrous metals such as brass, copper, bronze, etc.
Thanks to these geometric properties, particularly good surface results can be achieved. The highly positive geometry reduces the formation of a so-called built-up edge when machining aluminium. Very good results can also be achieved when machining both cast iron and plastics.
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
This cutting insert is made of sintered carbide. In contrast to HSS tools, the high temperature resistance of carbide allows higher cutting speeds. In addition, this insert is titanium nitride-coated, which contributes to greater heat resistance and tool life. TiN-coated inserts are intended for universal use. This means that soft materials can be machined in the same way as hard materials.
The advantages and properties of the titanium-aluminium-nitrogen coating (TiAlN coating):
The TiAlN coating is an all-round coating that is suitable for universal use. It allows the machining of hard materials such as steel, stainless steel or titanium alloys. Another advantage of this insert is that the use of cooling lubricant is not absolutely necessary. However, the use of coolant generally increases the service life of the insert.
€5.50*
Content: 1 pcs
€49.50*
Content: 1 pcs
€40.50*
Content: 1 pcs
€49.50*
Content: 1 pcs
€4.50*
Content: 1 pcs
€5.50*
Content: 1 pcs
12 March 2025 12:23
ErfĂ¼llt voll und ganz meiner Erwartung.
ErfĂ¼llt voll und ganz meiner Erwartung.
21 June 2023 18:02
gut
gut
6 December 2022 08:49
Super ok.
Super ok.
6 December 2022 08:33
Extreme Schärfe, sehr gut z.B. fĂ¼r Kunststoff
Extreme Schärfe, sehr gut z.B. fĂ¼r Kunststoff Bearbeitung geeignet. Top Qualität!
4 November 2022 08:40
Super schnelle Lieferung. Produkt wie beschrieben
Super schnelle Lieferung. Produkt wie beschrieben
18 October 2022 08:46
Keine Beanstandungen, schnelle Lieferung.
Keine Beanstandungen, schnelle Lieferung.
20 May 2022 11:04
Perfekt
Perfekt
4 May 2022 09:33
schnelle Lieferung gute Qualität zu einem vernĂ¼nftigen Preis
schnelle Lieferung gute Qualität zu einem vernĂ¼nftigen Preis
16 March 2022 09:05
Tolle Klinge fĂ¼r Drechselarbeiten
Tolle Klinge fĂ¼r Drechselarbeiten, zum Aushöhlen der Schale. WĂ¼rde ich jederzeit empfehlen. AuĂŸerdem viel gĂ¼nstiger als im Drechselshop.
21 December 2021 00:00
Top
Top Ware, schnelle und unkomplizierte Lieferung. Ich nutzt Sie Platten zum drechseln.